Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.7 LAccepted-AOC 126 NARANG COLONY JANAKPURI NEW DELHI 110058 | WEST | DELHI | 110058 | ₹74.7 L Quoted ₹75.9 L | L1 | Accepted-AOC Being lowest |
| 2 | L2₹81.5 LRejected-Finance | ₹81.5 L | L2 | Rejected-Finance Not being Lowest |
| Sl No | Description | Qty | Unit | JAIPAL AND BROTHERS L2 | Atish Builders LLP L1 |
|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. | 700 | Sqm | 20 ₹14,000 | 25 ₹17,500 |
| 2.00 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each and removing from site and making good the disturbed protion in CM 1:3 or PCC 1:2:4 type B-1 complete all as specified and directed.
Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. | 20 | Each | 150 ₹3,000 | 250 ₹5,000 |
| 3.00 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exc 4.00 Sqm each and removing from site and making good the disturbed protion in CM 1:3 or PCC 1:2:4 type B-1 complete all as specified and directed.
Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. | 22 | Each | 200 ₹4,400 | 270 ₹5,940 |
| 4.00 | Taking down shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. | 8 | Per Leaf | 100 ₹800 | 180 ₹1,440 |
| 5.00 | Demolition of brickwork built in cement mortar, including all quoins, arches, pillars, etc of any description including removing debris from site complete all as specified and directed. | 2 | Cum | 500 ₹1,000 | 180 ₹360 |
| 6.00 | Material and labour for 10 mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio 1:3 as per manufacturer's instruction on brick or concrete surfaces of ceilings including finishing surface even and fair complete all as specified and directed. | 150 | Sqm | 280 ₹42,000 | 260 ₹39,000 |
| 7.00 | Material and labour for 15 mm thick cement plaster on fair faces of brickwork or concrete surfaces of walls in cement mortar 1:6, to be finished even and smooth without using extra cement complete all as specified and directed. | 200 | Sqm | 220 ₹44,000 | 280 ₹56,000 |
| 8.00 | Material and labour for 15 mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio 1:4 as per manufacturer's instruction on brick or concrete surfaces of walls including finishing surface even and fair including necessary scaffolding up to (G+2 storey) complete all as specified and directed. | 350 | Sqm | 300 ₹1.1 L | 280 ₹98,000 |
| 9.00 | Material and labour for Rendering dubbing coat over damaged irregular surface of chajjas, roof projections, ceiling, fascia etc average 15 mm thick in CM 1:4 over cement slurry coat @3 Kg /Sqm followed by 5 mm thick rendering in CM 1:3 finished even and smooth including making of drip course as required complete all as specified.
NOTE :- Rate for formwork if required is deemed to be included in the rate quoted by the contractor. Rate include for roughening surface of RCC/PCC by picking sweeping clean and washing down with water etc. | 100 | Sqm | 500 ₹50,000 | 390 ₹39,000 |
| 10.00 | Material and labour for brickwork with old size, sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. | 8 | Cum | 4,500 ₹36,000 | 4,350 ₹34,800 |
Updated dates
Tender Value
₹82.4 L
EMD Value
₹1.5 L
Closing Date
23 Dec 2025, 6:00 pmClosed
CWE (AF) Palam
CWE (AF) Palam, Delhi Cantt-10
SPECIAL REPAIR TO HQ CE (AF) WAC PALAM BLDG (BLDG NO P-288) AT AF STATION PALAM DELHI CANTT 10
2025_MES_728990_2
CWE/PM/N-22/2025-26
Open Tender
Civil Works
180 days
GE (AF) Palam
Please refer tender documents
11 documents required · 11 mandatory
₹1,000
GE (AF) Palam
₹1.5 L
23 Jan 2026
25 Nov 2025
30 Dec 2025
25 Nov 2025
23 Dec 2025
9 Dec 2025
Amount
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each and removing from site and making good the disturbed protion in CM 1:3 or PCC 1:2:4 type B-1 complete all as specified and directed. Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exc 4.00 Sqm each and removing from site and making good the disturbed protion in CM 1:3 or PCC 1:2:4 type B-1 complete all as specified and directed. Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.
Taking down shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.
Demolition of brickwork built in cement mortar, including all quoins, arches, pillars, etc of any description including removing debris from site complete all as specified and directed.
Material and labour for 10 mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio 1:3 as per manufacturer's instruction on brick or concrete surfaces of ceilings including finishing surface even and fair complete all as specified and directed.
Material and labour for 15 mm thick cement plaster on fair faces of brickwork or concrete surfaces of walls in cement mortar 1:6, to be finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15 mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio 1:4 as per manufacturer's instruction on brick or concrete surfaces of walls including finishing surface even and fair including necessary scaffolding up to (G+2 storey) complete all as specified and directed.
Material and labour for Rendering dubbing coat over damaged irregular surface of chajjas, roof projections, ceiling, fascia etc average 15 mm thick in CM 1:4 over cement slurry coat @3 Kg /Sqm followed by 5 mm thick rendering in CM 1:3 finished even and smooth including making of drip course as required complete all as specified. NOTE :- Rate for formwork if required is deemed to be included in the rate quoted by the contractor. Rate include for roughening surface of RCC/PCC by picking sweeping clean and washing down with water etc.
Material and labour for brickwork with old size, sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Material and labour for brickwork with old size, sub class 'B' bricks, straight or curved on plan exc 6m mean radius, in half brick thick wall built in CM 1:4 complete all as specified and directed.
Demolition of reinforced concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
Material and labour for providing reinforced cement concrete nominal Mix using 20mm aggregate type B-1 (1:2:4) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for Formwork to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work, rough finished surfaces of concrete complete all as specified and directed.
Material and labour for providing reinforcement cement concrete Type B-1 1:2:4 (20mm graded aggregate) as in Beams, cantilevers bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Material and labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.
Material and labour for TMT bar 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Supply and fixing mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders complete all as specified and directed.
Demolition of concrete in ground floor and pavings n. exc. 15 cm thickness below or above ground level complete all as specified and directed.
Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or any thicknes in floors, aprons etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and labour for dark coloured / printed /highlighter ceramic tiles (digital first quality) 300x600x7 to 8mm thick digital ceramic tiles on vertical surfaces such as skirting, dado, etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick ready-mix cement based mortar ADHESIVE for fixing tiles & stone of approved make etc, complete all as specified and directed.
Material and labour for joint free coloured glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick ready-mix cement based mortar ADHESIVE for fixing tiles & stone of approved make etc complete all as specified and directed.
Material and labour for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over &including 10mm thick ready-mix cement based mortar ADHESIVE for fixing tiles & stone of approved make etc complete all as specified and directed.
Material and labour Vitrified printed digital tiles dark shade, joint free, first quality in different colours Pattern as in floors of 8 to 10mm thick (square / rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick ready-mix cement based mortar ADHESIVE for fixing tiles & stone of approved make etc complete all as specified and directed.
Material and labour vitrified ceramic tiles dark /printed shade tiles 20 mm thick (square/ rectanglar) polished area of each tile exceeding 2.16 sqm but not exceeding 3.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick ready-mix cement based mortar ADHESIVE for fixing tiles & stone of approved make etc complete all as specified and directed.
Supply and fixing vitrified ceramic tiles dark /printed shade tiles 18 mm to 20 mm thick (square/rectanglar) polished area of each tile in staircase riser & treads (one pice) ,vertical surfaces/skirting etc ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of slab, size of slab exceeding 0.11 sqm but n.exc. 0.36 sqm with and including screed bed 15 mm thick in cement mortar 1: 4 and a coat of cement slurry @ 3 kg/sqm etc complete all as specified and directed.
Material and labour Granite (of any type) Tiles 18 mm to 20 mm thick in floor machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 10mm thick ready-mix cement based mortar ADHESIVE for fixing tiles & stone of Approved make etc for laying floor finishes and cutting and polishing complete all as specified and directed.
Material and labour 18 mm to 20 mm thick Granite single piece (of any type) work (table rubbed and polished) in steps, jambs, pillars,walls window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer over and including 10mm thick ready-mix cement based mortar ADHESIVE for fixing tiles & stone of approved make etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc and including fixed with screws complete all as specified and directed by Engineer-in-Charge.
Material and labour for Durastone heavy duty tiles of size 600x600x10 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed.
M&L 12 mm thick toughned glass door (GD/GD-1) including rounding the edges and all necessary fittings such as lacking arrangements suitable handle 2 Nos mm each leaf, floor machine, pivot etc of suitable size floor spring make (ozone or equivalent) patch, fittings (matt black powder coated of make ozone or equivalent) doe handles size 1200 mm x 40 mm x 2 mm fixed as site as required and complete all as specified and directed.
Material and labour for wax polishing of Granite/marble (any type/any colur ) in floor,steps with admixture of pigment to match the shade of granite/marble stone and polishing complete all as specified and directed.
Dismantling ceiling,wall board, any size or description, fixed in any position or in any thickness, including cover fillets with nails complete all as specified and directed.
Providing & Fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO.50 TO 0.75 AS PER is 8225:1987, NON-COMBUSTIBLE AS PER bs 476 (PART 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross-T of size 15x32 mm of length 1200 mm and secondary intermediate cross -T of size 15x32 mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and directed.
Supply and fixing of semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO.50 TO 0.75 AS PER is 8225:1987, NON-COMBUSTIBLE AS PER bs 476 (PART 4) -1970 and light reflectance of 85% laid in existing grid complete all as specified and directed.
Supply and fixing 10mm thickness of PVC insulation panel with EPS stuck to 1mm printed PVC sheet suitable placed in false celling grid of GI frame for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, provision of hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed.
Material and labour for cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in copings, bed plates, including necessary form work kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
Material and labour precast cement concrete PCC 1:2:4 type B-1 (20mm graded aggregates) set and joined in CM 1:4 in landing cover slab, drain cover, shelves troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
Material and labour for preparing plastered or unplastered new surfaces of ceilings and applying two coats of white wash complete all as specified and directed.
Material and labour for preparing old surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion complete all as specified and directed.
Material and labour for preparing plastered or unplastered new surfaces on walls and applying two coats of plastic emulsion paint over one coat of alkalic resistant premier and 1mm thick wall care putty complete all as specified.
Material and labour for Complete removal of existing treatment from external surfaces of walls by mechanicaly and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and including applying complete with wall putty Minimum 1 mm thick over one coat of alkalic resistent primer and applying two coats of plastic emulsion paint complete all as specified .
Material and labour for preparing plastered or unplastered new surfaces on walls and applying two coats of distemper oil emulsion over one coat of alkalic resistant premier and 1mm thick wall care putty complete all as specified and directed.
Material and labour for Complete removal of existing treatment from external surfaces of walls & ceilings by mechanicaly and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and incuding applying complete with wall putty Minimum 1 mm thick over one coat of alkalic resistent primer and two coats of oil bound distemper (manufactured by Asian paint/Berger) complete all as specified and directed.
M& L for preparation of new plaster surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of chalk whitening primer and 3mm average thick cement base wall care putty complete all as specified and directed.
M& L for complete removal of existing surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying and applying two coats of cement base paint over one coat of chalk whitening primer and 3mm average thick cement base wall care putty complete all as specified and directed.
Material and labour for preparing plastered or unplastered old surfaces on walls including brooming down or steel wire brushing, scraping down and applying 3mm average thick cement base wall care putty and two coats of texture paint (as approved by GE) over one coat of alkalic resistent primer complete all as specified and directed.
M& L for preparation of new plaster surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43ltr/10sqm over a coat of exterior primer 2.20kg/sqm and 1 mm average thick cement base wall care putty (as approved by GE) complete all as specified and directed.
Material and labour for Complete removal of existing treatment from external surfaces of walls ,chajjas, soffits & beam including necessary scaffolding by mechanicaly and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and incuding old surfaces applying complete with wall putty Minimum 1 mm thick over a coat of exterior primer 2.20kg/sqm and applying two coats of acrylic smooth exterior paint of required shade 1.43ltr/10sqm as approved by GE complete all as specified and directed.
Material and labour for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and as directed.
Material and labour for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling plain or corrugated steel sheeting , any gauge,thickness,including naintal similar pattern roof coverings complete all as specified and directed.
Dismantling structural steel work including door,gates but excluding framed truss etc complete all as specified and directed.
Supply and fixing MS steel work in tubular trusses and tubular posts and bracing a including special shaped washers etc, complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and directed.
Supply and fixing Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde E-250) quality 'A' complete all as specified and directed.
Supply and fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to fix the wall fixed with self taping screws complete all as specified and directed.
Supply and fixing 1mm thick plain black mild steel sheeting,in ridges,hips,valley gutters,drip and straight flashings (length and girth as fixed) complete all as specified and directed.
Supply and fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Dismantling timber scantling 40sqcm over in section in any position complete all as specified and directed.
Supply and fixing timber framed and fixed clean sawn 2nd class hard wood in scantlings complete all as specified and directed.
Supply and fixing toughened glass of 12 mm thick as in partition including all necessary fittings such as framer, clamps /bracket channels beadings etc of suitable size and make fixed at site as required complete all as specified and directed.
Material and labour for solar control film 50 micron reflective type sticked to glass panes as per manufacturers instructions complete all as specified and directed.
Supply and fixing unit insignia embossed (unit symbol) on glass as per sample approve by GE door at alley way with one way visibility ,and fixtured complete of and glass partition above shutter to roof level complete all as specified and directed.
Supply and fixing powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed.
Material and labour for aluminium anodised powder coated frame work as in partition wall /Doors/windows/ventilators/ sliding shutters by using suitable section conforming to IS-733 and IS-1285 and coating grade A-153 conforming to IS-1868 & fixed with rawl plug and screws or with fixing clips with expansion hold fastners including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap grid beading etc gap of junction at top and bottom and sides filled with PVC Neoprene felt including necessary provision of aluminium grills to windows/ventilators etc all as specified & directed by Engineer-in-Charge. Note : (a) Aluminium section shall be of non rusted and bright finish completely (internal & external side). (b) Aluminium section shall be mechanically jointed wherever required. (c) Aluminium section size shall be approved by GE. (d) Aluminium section snap gird, cleat angle shall be screwed with chromium plates brass screw as directed by Engineer-in-charge. (e) the weight for all necessary fitting such as cleats, glazing clips, rubber packing/ pvc item/raw plug material/bass screw etc which are required for fabrication shall not be incuding in the weight aluminium for the payment. The weight of aluminium section shall be cosidered .no extra payment for fabrication matarial.
Supply and fixing powder coated aluminum anodised grill DG-102 (10mmx5.2mm) of Decorative grill or equivalent fixed with 'F' Section size not less than 20.60x15.20x1.5mm thick of approved make all as specified and directed. Note : Minimum thickness of anodizing shall be 15 microns.
Supply and fixing door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width of Aluminum body (die cast) weight between 61 to 80 kg complete all as specified and as directed.
Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete all as specified and directed.
Supply and fixing 100 mm long Aluminium Mortice lock, 2 levers vertical type complete all as specified and directed.
Supply and fixing for sheet glass 4mm thick quality fixing to wooden door/aluminium window shutters in any position with new beads/ steel section as required for securing complete all as specified and as directed.
Taking down carefully existing aluminium sliding/openable window shutters, taking down of existing broken any thickness from aluminium window shutters including existing rubber gasket complete, supply and fixing 4 mm thick plain sheet glass with and including provision of new rubber gasket and re-fixing the shutters in existing position complete all as specified and directed.
Taking down carefully aluminium sliding window shutters from the frames or chowkhat and supply and fix New locking arrangement in place of old one and re-fixing the same shuters in existing position etc complete all as specified and directed.
Supply and fixing for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed Stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
Material and labour for 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6Kg/Sqcm, fixed to wall, ceiling or in floor etccomplete all as specified and directed (concealed type).
Supply and fixing in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, 15mm bore pillar tap cast copper alloy chromium plated with high pressure and 32mm dia brass waste fitting complete all as specified and directed.
Supply and fixing in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 X 440mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and directed.
Supply and fixing in repair vitreous china, counter wash hand basin oval shape size( 420x420mm x135 mm) fixed on granite counter down slab including brass chromium plated full threaded waste coupling with grating 32mm dia incuding chromium plated bottle trap and 15mm bore Basin mixer (three holes) chromium plated high pressure fixed to iron pipe etc complete all as specified and directed. (Note: Granite slab, RCC plat form, brick wall support only shall be measured and paid separately)
Supply and fixing in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair brass CP towel rail 600 mm long, fixed with and including chromium plated screws on walls, complete all as specified and directed.
Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and directed.
Material and labour for GI tubing, 15mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified and directed.
Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and directed.
All as per item 95.00 here-in-before but 75/80 mm dia pipes complete all as specified and directed.
Supply and fixing for 75mm bore cast iron waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.
Supply and fixing for 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and directed.
Supply and fixing for 100mm bore cast iron waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.
Supply and fixing for 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and directed.
Supply and fixing for CI 100mm bends complete all as specified and directed.
Supply and fixing for CI 100mm bends with access door complete all as specified and directed.
Supply and fixing for CI 100mm single branch piece (equal or unequal) with access door complete all as specified and directed.
Supply and fixing for CI 75mm bends with access door complete all as specified and directed.
Supply and fixing for cast iron cowls 100 mm size complete all as specified and directed.
Material and labour in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.
Supply and fixing in repairs for Cast Iron `P or 'S' Trap 100mm bore complete all as specified and directed.
Supply and fixing Vitreous china coloured wash down water closet EWC Extended wall mounting constellation, including ‘trap and Connection to drain & to flushing pipe, coloured seat cover, dual flush cistern super water saver including brackets and Brass C.P. Flush pipe long band ,and mild steel chromium plated or aluminized hinging devices and 15 mm dia Jet spray straight with CP tube 1 mtr long etc complete set including all necessary fitings complete all as speicified and directed.
Supply and fixing Vitreous china coloured wash down water closet pan cristal one piece EWC, including ‘P’ or ‘S’ trap and Connection to drain & to flushing pipe, coloured seat cover, coloured 10 litres capacity low level cistern super water saver dual floor mounted flush including brackets and Brass C.P. Flush pipe long band ,and mild steel chromium plated or aluminized hinging devices and 15mm dia Jet spray straight with CP tube 1 mtr long etc complete set complete all as specified and directed.
Supply and fixing Vitreous china coloured EWC Prime Single piece with soft close seat cover and ceramic cistern including 15mm dia Jet spray straight with CP tube 1 mtr long etc complete set including all necassary fiting and mild steel CP or aluminimised hinging device complete all as specified and directed.
Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed.
Supply and fixing in repairs vitreous china urinals half stall type white or coloured with grating and union for discharge pipe and including chromium plated spreader suitable for 15mm bore pipe, provision of 40mm bore PVC waste pipe complete all as specified and directed.
Supply and fixing 5 mm thick glass mirror size of 750x600mm all edges/ border moulding complete all as specified and directed.
Cutting openings, through brick walls in cement mortar for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core etc to store and rubbish not exc. 50m complete all as specified and directed.
Supply and fixing in repair for 15 mm dia stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type screwed both side for iron pipe oe for union and fixed complete all as specified and directed.
Supply and fixing in repair chromium plated bib taps fancy type of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for Brass ferrule and fixed complete all as specified and directed.
Supply and fixingin repair Pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed make seiko complete all as specified and directed.
Supply and fixing in repairs vitreous china urinals (Top inlet) white as approved by GE with grating and union for discharge pipe and including chromium plated spreader suitable for 15mm bore pipe, provision of 40mm bore PVC waste pipe complete all as specified and directed.
Supply and fixing in repair Pillar cock 15 mm dia, cast copper alloy, screwed for iron pipe and fixed make Jaquar code AR-CHR-39011 or equivalent as approved by GE complete all as specified and directed.
Supply and fixing in repair chromium plated bib Cock fancy type of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for Brass ferrule and fixed make Jaquar code LYR-CHR-38037 or equivalent as approved by GE complete all as specified and directed.
Supply and fixing in repairs urinal valve Auto closing system screwed for iron pipe and fixed make Jaquar code PRS-CHR-077 or equivalent as approved by GE complete all as specified and directed.
Supply and fixing in repair for 15 mm dia Angular stop cock cast copper alloy screwed down high pressure, screwed both side for iron pipe for union and fixed make Jaquar code FLR-CHR-5053N or equivalent as approved by GE complete all as specified and directed.
Supply and fixingin repairs Hand Shower (Health faucet) with 1.00 metre long Easy flex tube in chrome finish & wall Hook complete all as specified and directed. Cat No. ALD-CHR-565 of JAQUAR or equivalent of make MARC or KOHLER as approved by the GE
Supply and fixing in repair 3 mm thick and 200 mm wide aluminum sheet (2 layers ) on expansion joint for floor to floor & wall to wall etc by drilling SS screws one side and other side will be fixed SS Screw duly setted for rasy movement during expansion & contraction including self-centering mechanism and moisture barrier, as per manufacturer's specifications"
Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed.
Demolition and breaking up drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar in 150 mm internal dia complete all as specified and as directed.
Material and labour for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed.
Material and labour 100 mm thick Concrete bed to drain pipes in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
Material and labour reinforced concrete pipes, class NP2, 150 mm bore, laid and jointed complete with collars complete all as specified and directed.
Material and labour for salt-glazed stone ware drain pipes, internal dia of pipe 150mm laid in trenches and jointed complete all as specified and directed.
Material and labour Plain cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channel, drain and manholes complete all as specified and directed.
Supply and fixing Stainless steel letters 2 inch width and height minimum 10 cm to 15cm fitted on walls complete all as specified and directed.
Supply and fixing 2 mm thick stainless steel necessery unit insignia (logo/symbol) area exc 0.25 sqm and not exc 0.5sqm complete all as specified and directed .
Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed.
Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc complete all as specified and directed.
For one light point controlled by one SP switch complete all as specified and directed.
For one fan/exhaust fan and wall mounted fan point controlled by one SP switch complete all as specified and directed.
All as per item No 137.00 here-in-before but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.
All as per item No 137.00 here-in-before but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.
All as per item No 137.00 here-in-before but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size all as specified and directed by Engineer-in-Charge.
All as per item No 137.00 here-in-before but with 4 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 4.0 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size all as specified and directed by Engineer-in-Charge.
Supply and fixing switch modular 1 way 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing socket modular 6 amps 2/3 pin combined 2 module suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing switch modular 1 way 15/16 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing socket modular 6/16 amps 2/3 pin combined 2 module suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of modular Fan step regulator, 120W - 2 module complete all as specified and directed.
Supply and fixing modular white cover plate with frame 8 module complete all as specified and directed by Engr in charge.
All as per item No 147.00 here-in-before but for 4 module complete all as specified and directed
All as per item No 147.00 here-in-before but for 2 module complete all as specified and directed.
Supply and fixing modular metal flush box for 4 module complete all as specified and directed by Engr in charge.
All as per item No 150.00 here-in-before but for 2 module complete all as specified and directed.
All as per item No 150.00 here-in-before but for 8 module complete all as specified and directed.
Supply and fixing of ceiling roses, surface bakelite 65x50mm 2 or 3 terminals, PVC/ Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge.
Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 amp, 240 volts complete all as specified and directed.
Supply and fixing in repair LED lights fitting cool/warm white of 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing in repair LED light fitting cool/warm white mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in charge.
Supply and fixing in repair LED luminaire cool/warm white 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Taking down of round shape LED fitting cool/warm white of capacity 12 watt fitting from roof ceiling and refixing the same as per direction of Engr in charge complete all as specified and directed.
Supply and fixing in repair round shape 12 watt 220 volts AC cool/warm white recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in repair of 12W Panel Round cool/warm white With dual colour effect as directed including gold streay strip rice light as per required length complete all as specified and directed.
Supply and fixing in repair photo frame LED lights cool/warm white of capacity 12 watt with adjustable head as per sample sample complete all as specified and directed.
Disconnecting the electric connection and taking down of unsv exhaust fan and deposit to MES store yard complete all as specified and directed.
Supply and fixing of exhaust fan steel body AC single phase 230V of size 300mm sweep with copper winding motor, steel blades and frame including louvers and 1.5 Sq mm 3 core copper wire for connection upto ceiling rose complete all as specified and directed.
Taking down unserviceable submain wiring of alluminium /copper two runs of any size cable including batten/conduit complete etc and making good distrub surfaces complete all as specified and directed.
Material and labour for submain wiring with two run of 6.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. - 2 Runs of 6.0 Sqmm single core and one run of 6.0 sqmm single core cable.
Material and labour for submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. - 2 Runs of 4.0 Sqmm single core and one run of 4.0 sqmm single core cable.
Material and labour for submain wiring with two run of 10 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 10.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. - 2 Runs of 10 Sqmm single core and one run of 10 sqmm single core cable.
Taking down old unsv MCCB, DB TPN type of any size complete all as specified and directed.
Supply and fixing load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 100 Amps rated bus bar and stove enamels dust and vermin proof suitable for MCCB of 100 Amps 4P =01 as for incomer complete all as specified and directed. Note :- MCCB/MCB shall be measured and paid seperately.
Supply and fixing of fixed thermal and fixed magnetic settings, 4 pole MCCB 100 Amps, 50 HZ, 415 volts with rupturing capacity 16 KA complete all as specified and directed.
Taking down old unsv MCB DB SPN type of any size complete all as specified and directed.
Supply and fixing MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet concealed in wall SPN 12 way 230 volts double door type regal gray horizontal type complete all as specified and directed. Note :- MCB shall be measured and paid seperately.
Material and labour for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including galvanized iron wire 4 mm dia as earth lead by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part I (1991) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc complete all as specified and directed. Note:- (a) All the joints shall be made with welding to get proper conductivity. (b) PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI) (c ) On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge.
Material and labour in replacement of earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed by Engineer-in-Charge.
Taking down unserviceable SP MCBs of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply complete all as specified and directed.
Supply and fixing MCB SP 6 to 32 Amps 10 KA, 240 volt 'B' Series complete all as specified and directed.
Supply and fixing MCB SPN 40-63 Amps 10 KA, 240 volt 'C' Series complete all as specified and directed.
Taking down unserviceable SPN MCBs of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply complete all as specified and directed.
Supply and fixing PVC trunking of size 100x50mm with cover for exposed wire/telephone cable etc inside the duct incl all necessary fitting/fixing items complete all as specified and directed.
Supply and fixing of glass water fall fountain in stainless steel with nozzle 1/4 inch 4 mm bore brass nozzle with chrome plated with provision of LED fountain light water proof of capacity 3 watt 12 volts of 03 Nos in each side (Total 06 Nos) in Tri Colour (India Flag) (Saffron,White& Green colour) complete in all respect incl necessary fixing arrangement in horizontal/vertical to make illumination on glass and necessary electrical wiring with 3 core 1.5 Sq mm for pump and lights alongwith outdoor type panel for fixing of pump switch & adoptor etc and UPVC pipes with fittings items for plumbing work and high discharge submersible pump (1/4 HP) ISI marked and FRP material of size height 8 feet and width 10 feet with toughend glass 6 mm thick transparent type incl necessary arrangement and fixing of bottom SS tank with suitable size gravels for complete all as specified and directed by Engr in charge.
Supply and fixing PVC water tank 3 layer of capaity 500 LTR to fixed at below ground level incl necessary connection for inlet and outlet pipe line for item No 180.00 here-in-before complete all as specified and directed.
Supply & fixing in repairs of gun metal globe or gate valve , with iron wheel head screwed both ends for GI pipe of 20mm dia, complete all as specified & directed.
Supply & fixed in repairs of gun metal globe or gate valve , with iron wheel head screwed both ends for GI pipe of 15mm dia, complete all as specified & directed.
Supply and fixing in repair hanging LED lights 10W warm/cool white as per sample approved by GE complete all as specified and directed.
Taking out the existing unserviceable rusted LT panel board alongwith busbar, MCCBs etc of any size/capacity including disconnection, breaking PCC foundation etc.and disposed off as specified and directed by Engr-in-Charge.
Contd..../- Incoming :- (a) MCCB 4 pole , Ics=100%Icu- 35/36 KA, 415 Volts, 400Amps, with thermal adjustable and fixed magnetic setting with extended terminals -01 Nos. Outgoing :- (a) MCCB 4 pole , Ics=100%Icu-27 KA, 415 Volts, 160 Amps, with thermal adjustable and fixed magnetic setting with extended terminals -02 Nos. (c) MCCB 4 pole , Ics=100%Icu-27 KA, 415 Volts, 125 Amps, with thermal adjustable and fixed magnetic setting with extended terminals -02 Nos. (c) Spare space for MCCB 100 to 125 Amps, - 01Nos to be provided. Note :- Rates quoted by the contractor shall be deemed to include for:- (i) Connection of incoming & outgoing cables using suitable size of aluminum lugs, nuts and bolts. (ii) Necessary PCC and earth work required as per the existing panel for the grouting of panel legs all as directed by Engineer-in-Charge.
Disconnection/taking out existing UNSV/damaged LT under ground cable/service cable from trenches/ducts or from to poles/walls or under roads/paths/drains/culverts and depositing the same in the storeyard or disposed off complete all as specified and directed of following sizes :-
150 sqmm 3.5 core complete all as specified and directed.
50 Sqmm 3.5 core complete all as specified and directed.
Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of following cross section area :-
150 sq mm, 3.5 core complete all as specified and directed.
50 sq mm, 3.5 core complete all as specified and directed.
Material and labour for providing earthing with GI earth plate electrode 600 X 600 X 6mm buried directly in ground (earth pit not less than 2.25M deep below ground level ) with top edge of the earth plate not less than 1.5M below ground level connected to GI strip 32 x 6mm thick for earthing lead fixed by means of nuts,bolt,washers etc connected to earth test point complete all as specified in electrical plate NO 3 of SSR1996 part 1 ,including necessary excavation and earth work in any strata of soil,comman salt, charcoal dust, 40 mm dia light grade GI pipe for protection to earth lead, GI water pipe 20mm dia with funnel &wire mesh , PCC pit with CI cover and frame etc all as specified and directed by Engineer-in-charge. Note:- (a) All the joints shall be made with welding to get proper conductivity. (b) PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI) (c ) On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge.
Excavation in trenches in hard and dense soil n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipe,foundation for poles, stay, laying cables etc and getting out complete all as specified and directed.
Material and labour for Sand cushioning of cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete all as specified and directed.
Supply and laying well burnt sub class ‘B’ bricks old size as mechanical protection to under ground cables laying across the cable complete all as specified and directed.
Supply and fix in replacement of MCCB 4 pole , Ics=100%Icu- 35/36 KA, 415 Volts, 400 Amps , with thermal adjustable and fixed magnetic setting with extended terminals complete all as specified and directed.
Supply and fixing GI pipe light grade of size 50mm bore incl necessary fittings acessories complete all as specified and directed.
Material and labour for cross arms of any sizes with drilled hole(hot & cold etc) in position MS works nut, bolts and washers and two coats of aluminium paint over one coat of primer complete as specified and directed by Engineer-in-charge.
JAIPAL AND BROTHERS (BID ID -3505715)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Tender.pdf
Tender Documents • 1.33 MB
BOQ_830223.xls
BOQ • 0.40 MB
Credit.pdf
Tender Documents • 0.16 MB
Download all tender documents and submit your bid