Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC MOHAN NAGAR DAKRA KHALARI RANCHI JHARKHAND 829210 | RANCHI | JHARKHAND | 829210 | L1 | Accepted-AOC L1 Bidder and the offer is acceptable as per terms and conditions of e-NIT | |
| 2 | Rejected-Technical AT BOCM COLONY BHELWATAND CHURI DAKRA POST DAKRA P S KHALARI DISTT RANCHI JHARKHAND | RANCHI | JHARKHAND | 829205 | - | Rejected-Technical The offer is not acceptable as per terms and conditions of e-NIT | |
| 3 | Rejected-Technical AT MOHAN NAGAR PO DAKRA PS KHALARI DISTT RANCHI JHARKHAND 829201 | CHATRA | JHARKHAND | 829201 | - | Rejected-Technical The offer is not acceptable as per terms and conditions of e-NIT |
| Sl No | Description | Qty | Unit | M/S AKASH KUMAR NONIA L1 |
|---|---|---|---|---|
| 1.00 | Carriage of 150 mm dia. Lead 5 Kms RCC pipe, A.C. pipes, Steel cylinder, R.C. pipes, S.C.I pipes and unreinforced cement pipes | 800 | Mtrs. | 6.61 ₹5,285.37 Lowest |
| 2.00 | Laying in postion centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe). ( 800 Mtr. X 28.26 Kg/m= 226.08 Quintal) | 226.08 | Quintal | 233.33 ₹52,752.09 Lowest |
| 3.00 | Providing and fixing bolts including nuts and washers complete | 120 | Kg. | 120.47 ₹14,456.44 Lowest |
| 4.00 | welding by gas or electric plant including transportation of plant at site etc. as complete. | 9,336 | CM | 3.18 ₹29,716.95 Lowest |
| 5.00 | Providing installation testing and commissioning of non- return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolt, nuts, washers erc. As required: 150mm | 1 | Set | 16,679.18 ₹16,679.18 Lowest |
| 6.00 | Providing laying testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS:1239 including welding, fittings like elbows tees, flasnge, tapers, nuts, bolts gasket set and fixing the pipe on wall/ ceiling with suitable clamp/ support frame and paining with two or moe coats of syntheic enamel paint of required shade complete as required. 25mm dia | 6 | Mtrs. | 530.87 ₹3,185.21 Lowest |
| 7.00 | BUTTERFLY VALVE ( MANUAL) with CI body SS Disc, nitrile rubber seal & C- ring PN 16 pressure rating for chilled water/ hot eater circulation as specified 40mm | 2 | Each | 3,185.21 ₹6,370.42 Lowest |
| 8.00 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sq.mm on plan including getting out and disposal of excavated earth up to 50m and lift upto 1.5m, as directed by Engineer-In charge. (0.3 X 0.5 X 800) M + for dismantling ( 0.5 X 0.5 X 800) M | 320 | Sq.M | 81.14 ₹25,965.06 Lowest |
| 9.00 | Providing of 6" dia heavy duty cast iron foot valve | 2 | Each | 10,259.64 ₹20,519.28 Lowest |
| 10.00 | Providing of 6" dia flange ( to replace damaged) | 30 | Each | 1,353.32 ₹40,599.75 Lowest |
Tender Value
₹2.4 L
EMD Value
₹3,000
Closing Date
23 May 2025, 5:00 pmClosed
Staff officer (EnM), Amrapali- Chandragupta Area
Office of the General Manager, Amrapali- Chandragupta Area, Honhe, Tandwa, Chatra, Jharkhand, 825321
Dismantling, shifting and laying of pipeline of 6 inch dia ( 800M approx.) as per requirement with priming arrangement and replacement of different types of damaged valves in existing pipelines at Amrapali OCP under A-C Area
2025_CCL_335305_1
GM(A-C)/SO(EnM)/e-NIT/25-26/05
Open Tender
Electrical and Maintenance Works
Item Rate
5 days
Amrapali- Chandragupta Area
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,000
6 Aug 2025
12 May 2025
24 May 2025
13 May 2025
23 May 2025
13 May 2025
13 May 2025 - 20 May 2025
Amount
Carriage of 150 mm dia. Lead 5 Kms RCC pipe, A.C. pipes, Steel cylinder, R.C. pipes, S.C.I pipes and unreinforced cement pipes
Laying in postion centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe). ( 800 Mtr. X 28.26 Kg/m= 226.08 Quintal)
Providing and fixing bolts including nuts and washers complete
welding by gas or electric plant including transportation of plant at site etc. as complete.
Providing installation testing and commissioning of non- return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolt, nuts, washers erc. As required: 150mm
Providing laying testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS:1239 including welding, fittings like elbows tees, flasnge, tapers, nuts, bolts gasket set and fixing the pipe on wall/ ceiling with suitable clamp/ support frame and paining with two or moe coats of syntheic enamel paint of required shade complete as required. 25mm dia
BUTTERFLY VALVE ( MANUAL) with CI body SS Disc, nitrile rubber seal & C- ring PN 16 pressure rating for chilled water/ hot eater circulation as specified 40mm
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sq.mm on plan including getting out and disposal of excavated earth up to 50m and lift upto 1.5m, as directed by Engineer-In charge. (0.3 X 0.5 X 800) M + for dismantling ( 0.5 X 0.5 X 800) M
Providing of 6" dia heavy duty cast iron foot valve
Providing of 6" dia flange ( to replace damaged)
Total impact of GST for the purpose of CTC
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .