Erode Zone Erode District Vellottamparappu Town Panchayat SCHOOL IMPROVEMENT GRANT WORKS 2024-2025

Amount

Chipping of concrete and roughening the surface cost and conveyance of all materials to site and all labour charges etc.. Complete

Plastering in Cement Mortor 1:3 Mix (one cement, Three M- Sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supply and Fixing of PUF Roof Panels made up of Minimum 0.5mm thick PPGI Corrugated Sheet at the top of a plain Sheet at the bottom with a layer of right CFC free Polyurethane foam ( PUF ) of density 40kg + 2kg/cu as insulstion in between. The Polyurethane foam shall confirm to latest IS 12436.The minimum thickness of PU foam layer shall be 49mm for haveing 50mm ( min) thick PUF Panel.The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSN as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches tc finished panel during transportation. Providing ridges or hips of with plain G.S sheets fixed with polymer coated J or L hooks,bolts and nuts 8mm dia G.I. limpet and bitumen washers etc,complete excluding the cc of trusses, purlins and inclusive of cutting to size and shape wherever required including cost and conveyance of all materials and labour charges etc., complete as per standard specifications.

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Supply and Fixing of 48" Ceiling Fan 5 Star Rated (without Regulator)

Supplying and Fixing of 7W / 9W LED Bulb

chandrasekaran (BID ID -1164894)