RENEWAL OF SURVEY OFF FURNITURE AF STN PALAM UNDER GE (AF) GURGAON NO.1

Amount

Schedule 'A' Part-I (Wooden Furniture)

SIDE BOARD,FD-272 DIMENSION: Overall size shall be 1220mm long, 455mm wide and 760mm high. DESCRIPTION: a) It shall be made of BWR plywood of grade - A of thickness as specified in drg; in lieu of prelaminated particle board. b) 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided all-round the edges of shutters and drawers. c) Each drawer shall be provided with 2 x Nos of 12 inch long stainless steel telescopic channels. d) Drawer and shutter shall be provided with 100mm long 8mm dia chrome plated handles e) Each Shutter shall be provided with magnetic catchers. Rest all specifications and dimensions are as per drg FINISH: All unlaminated plywood surface/wooden surface shall be polished in mat melamine finish of walnut shade.

Sofa Set Five Seater : FD-281 DIMENSION: Overall size of three seater shall be 1730mm wide, 725mm deep and 530mm high up to arm level and one seater shall be 670mm wide and 725 mm deep and 530mm high up to arm. DESCRIPTION: (a) All wood to be used shall be 1st class hard teak wood (b) Sofa set five seater shall consist of one three seater and two single seats. (c) 10x Nos of foam cushions to each set each of size 530mm x 560mm x 100mm thick of 40 density covered with white lining cloth and best quality tapestry cloth of rate not less than 450 per mtr shall be provided with nylon zipper at one edge duly covered under the tapestry cloth flap. (d) PVC hard rubber shoes of 25mm dia shall also be provided to bottom of each leg with 20mm long screws. Rest all specifications and dimensions are as per drg FINISH:- All wooden surface shall be polished with high gloss melamine polish in walnut shade after preparation of surfaces.

RECEPTACLE PVC,FD/E6/MAP/13 DIMENSION/CAPACITY:-The receptacle shall be of capacity 20 ltrs DESCRIPTION:The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided with swivel lid and iron handles on both sides as shown in drg. Make-Cello, TUPPERWARE or AMKO equivalent as shown in drg.

Schedule 'A' Part-II (Steel Furniture)

Teble Bed Side : FD/E6/MAP/15® DIMENSION: The overall size of the table bed side 450mm x 450mm x DESCRIPTION: (a)The frame shall be of 18mm square hollow pipe of 18 gauge. (b) It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. (c) 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of drawers. (d) Each drawer shall be provided with 2 x Nos of stainless steel telescopic channels. (e) Drawer shall be provided with 100mm long 8mm dia chrome plated handles Rest all specifications and dimensions are as per drg FINISH: All metal surface shall be dry powder coated in black and all unlaminated surfaces shall be polished in satin/mat melamine finish of walnut shade after preparation of surfaces. 500mm

CHAIR WRITING OFFICERS,TP (FD/E6/MAP/12) DIMENSION: The overall size of the chair shall not be less than 475mm wide and deep and 580mm high at seat from ground level. DESCRIPTION: a) The seat and back are to be made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Melamine foam. The back foam is to be designed with contoured lumbar support for extra comfort. b) The foam is to be molded with density = 45 +/-2 kg/m3 and, Hardness = 20 +/- 2 at 25% compression. c) Arm rest shall be one piece FINISH: All metal parts shall be dry powder coated in thickness more than 50 microns.

Chair Computer : FD/E6/MAP/01 DIMENSION: The overall size of the chair shall not be less than 480mm wide and deep and 550mm high upto seat from ground level. DESCRIPTION: (a) The Seat & Back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers (b) The base of chair shall have five prong with pneumatic up & down with one point locking mechanism. (c) Handle arm shall be gas-assisted injection molded from black polypropylene. Revolving & tilt should have a full 360 degree revolving mechanism with 17 deg. (d) Maximum and minimum height of gas lift shall be 930mm and 830 mm respectively. (e) Color of seat upholster should be post office red, blue or black. FINISH: All metal parts shall be dry powder coated in thickness more than 50 microns

Shoes Rack Steel : FD-E6/Map/02® DIMENSION: Overall size shall be 700mm long.300mm wide and 880mm high. DESCRIPTION: The legs of the shoe rack shall be of 25mm dia MS pipe of 18 gauge. The five shelves of the rack shall be of 20mm dia MS pipe of 18 gauge welded to legs. The shelves shall have 3mm dia MS rod 9 Nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. FINISH: Pre treated with epoxy powder coated oven baked with ivory white colour/white/warm grey

Almirah Med Steel With Shelves FD-1032 DIMENSION: Overall size shall be 1270mm high. 765mm wide and 440mm deep DESCRIPTION:- (a) It shall be made of 1mm thick mild steel sheet/CRCA sheet. All joints shall be riveted and welded thoroughly. (b) The almirah shall have three shelves. (c) The almirah shall have one spring action recessed handle 150mm long with built in locking arrangement fitted to cut out space in one shutter with proper workmanship/normal handle 120mm with three way locking system. Rest all specifications and dimensions are as per drg FINISH: The almirah shall be dry powder coated in double shade (shutter in off white and outer frame in steel grey after after preparation of surface.

JAI TRADERS(INDIA)