REPAIR / MAINTENANCE IN NALA GARDEN COMPLEX UNDER AGE B/R-II OF GE JAIPUR

Amount

Taking down cement or cement lime plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc.

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces finished even and smooth in cement mortar 1:6,even and smooth w/o using extra cement .

M&L Preparation of newly plaster or unplaster surface of wall and applying two coat of exterior emulsion weather proof paint and one coat of primer on walls comp all as specified

M&L Preparation of newly plaster or unplaster surface of wall and applying two coat of interior emulsion paint and one coat of primer on walls comp all as specified

M&L Preparing old painted surfaces of steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint complete all as specified.

M&L for Complete removal of existing treatment and M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of existing surface with wall care putty on plastered surface and applying two coat of weather proof exterior emulsion paint (weather coat smooth) using hand roller over and including one coat of primer on walls complete all as specified and as directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment and M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of existing surface with wall care putty on plastered surface and applying two coat of weather proof interior emulsion paint (weather coat smooth) using hand roller over and including one coat of primer on walls complete all as specified and as directed by Engineer-in-Charge.

M&l for Complete removal of existing treatment and M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of existing surface with wall care putty on plastered surface and applying two coat of weather proof interior emulsion paint (weather coat smooth) using hand roller over and including one coat of primer on ceiling surface complete all as specified and as directed by Engineer-in-Charge.

M&L Preparation of old surfaces of wood any description, over 10 cm width or girth and applying two coat of varnishing complete all as specified

M&L Preparing old painted surfaces of wood or wood based materials over 10 cm width or girth of any description & applying one coat of synthetic enamel paint complete all as specified.

M&L complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil emulsion,white or tinted complete all as specified and as directed by Engineer-in-Charge.

M&L complete removal of existing treatment of old plastered surfaces on ceiling and applying two coats of distemper oil emulsion,white or tinted complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick or stone boulders masonry work built in cement mortar including all quions arches pillars etc all as specified

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius brick walls built in CM 1:6.

S&F Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment of 16-18mm thick

S&F Providing precast cement concrete louvres and jallies,25 mm thick type B0 1:2:4 using 12.5mm garded aggregate set in CM 1:4 including Pillars for finsing at regular interval and taking down old one of 25mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item

Dimantling water tanks cap exc 250 & n.exc.500ltrs.

Dismantling water tanks,exc 500 and n.exc 1000 litr

S/F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity 1000Litre

S&F Rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed of 15mm. (minimum wt of 142 gms) all as specified

Disconnecting existing tanks,Capacity 500 ltr setting aside ( or lowering if required) for repair and cleaning etc. and hoisting if required , cleaning and removing all scale and dirt, from tanks and from mouth of curculating pipe and reconnecting and re-fixing in postion ( cleaning , repairing etc measured seprately

Disconnecting existing tanks,Capacity 1000 ltr setting aside ( or lowering if required) for repair and cleaning etc. and hoisting if required , cleaning and removing all scale and dirt, from tanks and from mouth of curculating pipe and reconnecting and re-fixing in postion ( cleaning , repairing etc measured seprately

S&F one piece closet with integrated cistern, seat cover and twin flushing fittings EWC , all as specified and directed by Engr In Charge ( Make:- Jaquar )

Taking down existing roof treatment upto mother slab complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge

M&L for screed plaster 15 mm thick in CM 1:4 on roof surface complete and finished the surface even and smooth without using extra cement etc. complete all as specified and directed

M&L water proofing treatment to roof surface by applying with a coat of cold aplied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing including a coat aluminuium paint over APP membrane as per manufacturer instructions. the work shall be carried out by authorised applicator

Less Schedule of Credit

M/S MAYANK ASSOCIATE (BID ID -3135950)

NAGHAR ENTERPRISES (BID ID -3137496)

M/S JALANDRA CONSTRUCTIONS (BID ID -3136704)

M/s KAKSI ENTERPRISES (BID ID -3144311)