PROVISION OF ROADS IN TECH AND DOMESTIC AREAUNDER GE (AF) LOHEGAON AIRFORCE STATION PUNE

Amount

M&L for Surface excavation n exc (not exceeding )30cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.

All as per item No 1 add to (or deuct from) for every 3cm or part thereof above or below 15cm average depth and getting out hard dense soil all as specified and directed (For adjustment purpose)

M&L for Rolling and consolidating formation surfaces in cutting rolling with power roller of 8 to 12 tonne complete all as specified and directed.

M & L for 200mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated with 8 to 12 tonne power roller for each layer to required gradient and camber spread in layer complete all as specified and directed.

M & L for 150mm thick (compacted thickness) in two layers (each layer 75mm) wet mixed macadam with coarse aggregate of grading 1 Granite trap or Basalt (90 to 40mm size), spread,rolled and consolidated with 8 to 12 tonne power roller for each layer to gradient and camber requried complete all as specified and directed.

M&L for preparing unsurfaced surfaces of any description by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.

M & L for applying evenly a priming /tack coat with paving bituminous primer @ 10.0Kgs/10 Sqm (Paving Bitumen) VG-30 complete all as specified and directed.

M&L for bituminous premixed asphaltic semi dense concrete 40 mm consolidated thickness with binder content 5.5% VG-30 by wt of total mix using paving bitumen of Grade VG-30 laid with mechenical paver , rolled and consolidated to reqd camber by using power roller of capacity 8 t0 12 Tonne etc complete all as specified and directed.

S&F Metal tubular delineator made out of ABS round body fitted with 2 nos 65mm dia highly reflective reflectors made out of PMMA and mounter on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green red and yellow reflector radium tape of 25mm wide strips with anti thteft steel net for reflector protection including embedding in PCC 1:2:4 (150x 150/300mm type B1 complete all as specified and directed.

S&F Cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PMHA striplens reflector of modal No.DA 972.0 fixed with and incl MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Supply and fix solar Studs cat eye aluminium alloy shall (100% water proofing design accounting design according to 65) of size 125mm x 125mm x25mm (shank 65mm) of hogh efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2v/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures etc. complete all as specified and directed.

M&L preparing bituminous surfaces of road and marking 2.5mm thick centre lines,stope lines ,dashes,arrows etc.and like n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all asper manufacturers instruction complete all as specified and directed.

M & L for Excavation in trenches in hard /dence soil not exceeding 1.5 m wide and not exceeding 1.5 m depth complete all as specified and directed.

M&L for PCC type D2 (1:4:8) using 40mm graded crushed aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement 1:3(1 cement:3 coarse sand), inclduing making joints with or without grooves (thickness of joints) except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M & L for preparation of new concrete surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L for Returning,filling in ,including spreading,levelling ,watering and well ramming in layers not exe 25cm in hard/dense soil complete all as specified and directed.

M & L for Removing excavated material n, exe 50m and depositing where directed at a level n, exe 1.5 m above the starting point complete all as specified and directed.

M & L Hardcore with broken stone of gauge exc 63mm but n exc 100mm, deposited, spread and levelled and layer n.exc 15cm thick, water and rolled/rammed to a true surface all as specified and directed.

M&L for 100mm thick PCC type D2(1:4:8) using 40mm graded crushed aggregate as in sub base, finished even and fair complete all as specified and directed.

M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and directed.

M&L Rubber mould glossy finish paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and directed.

M & L for provding cement concrete type B1 (1:2:4) using 20mm graded crushed aggregate as Coping, kneelers etc complete all as specified and directed.

Aadarsh Construction

MOHANLAL MATHRANI CONS. PVT. LTD.