GE/ALP (8131B) KOLKATA OF 2022-23

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400mm x 400mm x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as directed.

M&L brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cum, getting ut,returning,filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering & removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground complete all as specfied and directed.

Dismantling fencing wire mesh, any type complete all as specfied andas directed.

M&L cement concrete (1:3:6) (using 40 mm graded stone aggregate) as in cement concrete in foundations, filling and mass concrete complete all as specified and directed.

S&F for rolled mild steel joist, channel, angle, or tee section, fixed independantly, without connecting plates, etc. as in post conforming to Fe 410 W (gde E-250 quality B). complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised Chainlink fencing of approved size or type weight as directed per square metre as approved.

S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and directed.

S&F Mild steel bars 10 mm dia and over, cut to length, bent to shape required for securing chain link fencing complete all as specified and directed.

S&F flat iron as for securing wire mesh etc. posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat ironfillets including all necessary drilling, bolting or riveting, etc.,and similar work conforming toFe-290 Gde E-165 completye all as specfied and directed.

S &F MS screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square n exc 5 cm long dia of neck 5 to 10 mm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors, iron gate, ladders; framed balusters, ways : railing : frame work of watertanks and similar work conforming Fe-290, Gde E-165 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified and directed.

M&L for one coat of synthetic enamel paint including preparation on old steel surfaces of any description over 10 cm width or girth complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 (40mm graded stone aggrgate) as in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

-ditto- as per item No 23 above Add for each 25 mm girth or part thereof over or under 30cm complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

Dismantling of interlocking tile 60-80mm thick complete all as specified and directed.

M&L for 25 mm thik sand cushion under paver block or iterlocking tiles floor including watering and consolidation complete all as specified and directed

M&L for 80 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-40 Grade with grey cement and no pigment complete all as specified and directed.

M&L for refixing of interlocking tiles using old serviceable tiles obtained from item No-27 complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete as specified and directed.

M&L Providing cement concrete with type B1 (1:2:4) (using 20mm graded stone aggregate) as in coping and the like including weathering slightly rounded or chamferred angles and throating as directed.

Demolition of re-inforced cement concrete (re-inforcement cut as required to facilitate demolition) of any descriptions, in ground floors not exc 150mm thick, above or below ground level complete all as specified and directed.

M & L for reinforced cement concrete (Nominal mix) type B1 (1:2:4) (using 20 mm graded stone aggregate) walls any thickness complete all as specified and directed.

M&L for providing RCPC factory made 75mm precast RCC cover slab of 3MT load bearing capacity conforming to IS : 12592 (Grade M-30) 3 for drain cover and manhole cover, Complete all as specified and directed. Make : RCPC

Taking down cement plaster or lime plaster of any description from stone or brick wall/ ceiling etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD land including necessary working platform complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar (1:4) on brick walls finishing even and smooth (with out using extra cement)etc including necessary working platform complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick walls finishing even and smooth (with out using extra cement)etc including necessary working platform complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar (1:6) on brick walls finishing even and smooth (with out using extra cement)etc including necessary working platform complete all as specified and directed.

M&L for preparing new plastered plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for two coat of weather proof exterior emulsion paint on new surface of external walls including preparation to remove all foreign materials including necessary working platform complete all as specified and directed.

M& L for preparation of old painted surface of walls and applying one coat of cement base paint complete all as specfied and directd.

M&L for precast cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) kerbs stone rounded or chamfered on edges as in edge of path, hard standing built in cement mortar (1:6) complete all as specified and directed.

Cleaning of deposited earth , silt debris from covered drain after shifting of drain cover and placed the drain cover to its original positon after cleaning of drain complete excavated earth shall be removed outside MD land exc 1.5 KM but not exc 5 KM distance complete all as specified and directed.

Exavating in trenches in soft/loose soil n. exe 1.5 m wide and n. exe 1.5 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n exe 10 sq m on plan n exe 1.5 m depth and getting out complete all as specified and directed

Material and Labour for 200mm bore salt glazed stone ware drain pipes Grade 'A' laid in trenches and jointed in cement mortar (1:1) including demolition of old one as specfied complete all as specfied and directed.

All as per item No 46 here in before but for 150mm bore.

M&L for concrete bed in cement concrete(1:3:6) type C2 to drain pipes of 200 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

All as per item No 48 here in before but of 150mm bore.

Cutting into existing man holes for connecting new drain of 200mm dia pipe and making good two pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 and finished and reforming benching as required complete all as specified and directed.

All as per item No 50 here in before but of 150mm bore.

Returning, filling in, including spreading, levelling, watering and well raming in layer not exe 25cm complete as specified and directed.

Removing excavated material ourside MD land exe 1.50km but n. exe 5km and depositing where directed complete as specified and directed.

SOVA ENTERPRISE

ESS PEE UDYOG

DIPAK ENTERPRISE

RST ENTERPRISE

SENCO

R.R.ENTERPRISE

KAMAKHYA TRADERS

ROY CONSTRUCTION