SPECIAL REPAIR TO TO ROOF OF BLDG NO E 49 SARAGARHI HALL AT NAGZEERA LINES OF HQ JL WING, THE INFANTRY SCHOOL, BELGAUM, PROVN OF CHAIN LINK FENCING FOR BLDG NO 197,198 AND 200 AT HARSHAN ENCLAVE I, PROVN OF RAIN PROTECTION SHED AT BLDG NO 141 AND 172

Amount

Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings and taken as credit complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings of any description taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed complete all as specified and as directed.

Description all as per item no :3 here in before but except timber

Material and labour for Preparing surfaces of wood ,new or old of any description and girth and treated with two coat of creosote oil complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron+)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron+)/Llyod

Supply and fix Rolled mild steel roof trusses trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc. conforming to grade Fe 410-W ( Gde E - 250 ) quality 'A' complete all as specified and as directed

Supply and fix Rolled mild steel frame work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work con-forming to FE 290. Gde-E-165, complete all as specified and directed.

Supply and fix Mild Steel work as in wind ties for roof including securing bolts and cutting tops to shape etc. conforming to Fe-290 Gde E-165 complete all as specified and as directed

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate in coping/bed plates eves filling in roof including necessary steel form work complete all as specified and as directed

Dismantling wall or ceiling boards or insulation boards/ slab any thickness fixed with nails including cover fillets and taken as credit complete all as specified and as directed .

Supply and fix Aluminium composit panel board 3 mm thick for cladding/bush boardfixed over existing wooden/steel frame work with screwing and necesary fitting and scaffolding etc, complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Taking down eaves gutter pipes,rain water pipes (of any size and pattern) including fittings,head shoes,bends,swan neck etc. and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter trapezoidal profile 150mm bore including pipe accessories PVC holder bats , bolts nuts etc complete all as specified and as directed.Note : Make of PVC eaves gutter :Finolex/Supreme/Prince

Demolition/breaking up or down PVC /Ac/CI/Cement drain pipe any size fixed in any position including removal of debris off the premises complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length fixed to wall and jointed with solvent cement complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm dia PVC (SWR) bend any radius with access door complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince (ISI MARKED)

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of PCC solid block masonry built in cement mortar pillars, etc. in any position below or above ground level etc, and remopval of debris off the premises complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar including raking out joints ,hacking for key ,scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering 10mm thick in CM 1:6 on stone masonry surface and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in CM 1:4 on brick or concrete surfaces in two layers 5mm thick top layer mixed with water proofing compound over 10mm thick rendering on external wall surfaces of wall complete all as specified and as directed.

Supply only integral water proofing compound Note :Make :Impermo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Preperation of newly plastered surfaces of wall and brooming down and appyling two coats of exterior emulsion paint over a coat of water based primer on wall complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brushing ,scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of oil bound distemperover a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Complete removal of old plastered/unplastered surfaces of wall and brooming down and appyling two coats of exterior emulsion paint over a coat of water based primer on wall complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick above or below ground level including removal of debris off the premises complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match with the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note : Make of Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Premium quality Coloured Glazed ceramic tiles in vertical surface 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado laid over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed . Note : Make of Glazed Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed .

Material and labour for Kota stone slab 20-25mm thick in riser of step, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc,complete all as specified and as directed .

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters, making good cill, jambs etc to match with the existing surface (without taking off shutters from the frames) and taken as credit complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters, making good cill, jambs etc to match with the existing surface (without taking off shutters from the frames) and taken as credit complete all as specified and directed.

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints fixed in position complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick veneered particle board ,medium density with commercial face veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, glazed and skelton shutters open rebated and prepared to receive glass gauze etc edges of framing plain ,chamfered or rounded , fitted with cut and mitred beads rebated sash bars any numbers for securing gauze etc divided into squares , size of members of shutters as specified in SSR Part-I section 8 caluse 8.24(a) complete all as specified and as directed.

Description all as item No 41 here in before but window,ventilator etc are provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24(b).

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed .

Supply and fix in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staples in panel of joinery complete all as specified and as directed .

Supply and fix MS butt hinges cold rolled medium weight 100mm size complete all as specified and as directed..(ISI MARKED)

Supply and fix MS butt hinges cold rolled medium weight 75 mm size complete all as specified and as directed..(ISI MARKED)

Supply and fix Helical door spring MS 300mm long ordinary rat tail pattern spring including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed. .(ISI MARKED)

Supply and fix 100mm long extruded section aluminium alloy anodised handle fabricated typecomplete all as specified and as directed.Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix 150mm long extruded section aluminium alloy anodised handle fabricated typecomplete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed.Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed. Note : Make of Aluminium anodised sliding door bolt : Classic/Crown/Adarsh . .(ISI MARKED)

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Note : Make of Glass : saint gobain/Modi guard/Gold fish

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m deep in hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete in foundations, filling and mass-concrete type D2 1:4:8 (using 40 mm graded stone aggregate), complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in coping,bed blocks ,eves filling between wall and tile in roof/as in chowkats etc including necessary steel form work and surface finished fair and even complete all as specified and as directed.

Material and labour for Rendering 15 mm thick on fair faces of brick work or concrte surfaces in CM 1:4 and surface finished even and smooth without using extra cement complete all as specified and as directed..

Material and labour for Preparation of plastered wall surfaces and applying two coats of cement based paint over a coat of chalk whitening complete all as specified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Supply and fix Rolled mild steel angle fixed independently, without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts incl cutting tops to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 410-W (Gde E-250) quality-A complete all as specified and as directed.

Excavating in post holes each n exc 0.5 cum, getting out, in hard/dense soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing surplus soil to a distance nexc 50 m and making good the disturbed surfaces complete all as specified and as directed.

Material and labour for Plain Cement concrete type C2 1:3:6 ( using40mm graded aggregate) as in foundation of post holes. complete all as specified and as directed.

Supply and fix Mild steel deformed round bars 10mm dia and over, cut to length bent to shape required, including cranking, hooking ends and binding with mild steel (annealed) not less than 0.9mm dia complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry in cement concrete blocks in PCC 1:3:6 type C1 ( using 20mm graded aggregate) set in cement mortar CM 1:6 complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type

Supply and fix Mild steel screw bolts (machine made) of 5 mm to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt not exceeding 5 cm complete all as specified and as directed

Supply and fix Mild steel flat for screwing chain link fencing including securing bolts and similar work conforming to Fe -290 Gde E-165 complete all as specified and as directed.

Excavating in post holes each n exc 0.5 cum, getting out, in soft/loose soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing surplus soil to a distance nexc 50 m and making good the disturbed surfaces complete all as specified and as directed.

Supply and fix Mild steel work as in posts ,tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and as directed

Supply and fix Mild steel screw bolts (machine made) of 11 mm to 15 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exceeding 10 cm but not exceeding 15 cm complete all as specified and as directed

Taking down carefully sub main wiring of any type and size and including dismantling of old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed.

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric copper conductor cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral in and including PVC CASING CAPPING of suitable size ISI marked with all accessories in wiring system and Provision of 1.5 sqmm green coloured PVC insulated copper conductor connected to common earth dolly including provision of suitable size of 2nd HW board with sunmica top cover for mounting switches/sockets etc, including dismantling old unserviceable point wiring of any description for one light point controled by one 1 way switch complete all as specified and as directed. NOTE: (i) Make of PVC cable :KEI/Polycab/Indo Asain (ii) Make of PVC casing and capping :Avon Plast/Preto Plast/Garware

Description all as per item No. 77 here in before but for one fan point controlled by one switch and regulator.

Description all as per item No. 77 here in before but for one 3 pin socket outlet for independent socket 5 amps point.

Description all as per item No. 77 here in before but for one 05 amps socket outlet on the same board with other switches.

Description all as per item No 77 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Modular switch type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix Modular switch type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular electronic type fan regulator 230 V , 120 watt step type, 2 module complete all as specified and as directed . Make : Anchor/Legrand/Rider

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through and including PVC casing and capping and accessories fixed in wall/ceiling and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC casing and capping :KEI/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix inverter type LED INTEGRATED BATTEN tube light fitting type 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted FRLS PVC flexible copper conductor cable with suitable size complete all as specified and directed. Note : Make :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO20 OR equivalent in Bajaj/CG/Philips

Supply and fix in repair LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make :Havells Cat part no VENUSNEO2X2PLR36WLED857G2: OR equivalent in Bajaj/CG/Philips

Supply and fix in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Note : Make :Havells Cat part no : ENDURASUNDOWNSL35WLED765PASYBOPC OR equivalent in Bajaj/CG/Philips

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) including taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix Wall mounting fan, 450 mm sweep, 230 Volts, single phase, with all fixing accessories and provision of suitable clamps for fixing to wall and making good disturbed surface matching with the existing surface including removal of unserviceable exhaust fan of any description and deposited to MES store complete all as specified and as directed. Note : Make:-Almonard /Crompton/Orient

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core FRLS PVC flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .Note : Make:-Almonard /Crompton/Orient

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ,heavy duty , copper winding with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note : Make:-Almonard /Crompton/Orient

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make :Indo Asian/L&T/Siemen

Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Make - L&T / Siemen/Indo Asian .

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete all as specified and as directed ..Note :Make :Indo Asian/L&T/Siemen

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

M/s. J P CONSTRUCTIONS

SHRI.H.R.PATIL

SHREESAMARTH CONSTRUCTION

M/s. KIRAN M CHOUGULE

ASHOK M RAJGOLKAR

M/s. VIJAY ELECTRICALS