CERTAIN REPAIRS TO TILING, BRICK WORK, JOINERY, PAINTING, PLUMBING WORK, FALSE CEILING, ROOFING, PANELLING AND MISC REPAIRS AT KAPRA, BHALRA, GHATI MORH AND AREA AT BHALRA MIL STN UNDER GE (I) 873 EWS.

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position complete and removing rubbish from the site, complete all as specified and directed.

75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in sub base, finished even and fair to receive finishes, complete all as specified & directed.

Machine pressed precast concrete interlocking paver block 60mm thickness, M-40 grade conforming to IS-15658, any shade, colour and pattern laid over and including 20 to 30mm thick stone dust / sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including budding and filleting joints etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar including removal of debries outside cantt area, complete all as specified and as directed.

Vitrified coloured tiles, light shadeof size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:4 and pointed in coloured cement to match the colour of tile all as specified and directed.

Non-skid coloured glazed ceramic jointless tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) area of each tile exc 0.18 Sqm but nexc 0.38 sqm, 7/8mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

16mm to 18mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down with shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

Factory made solid panel PVC door / cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 100mm size, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 200mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

Mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 12mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate, 300mm long (ISI marked), complete all as specified.

Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 200mm long (ISI marked), complete all as specified.

Mild steel pressed handle, oval type, stove enamelled black, 150mm long (ISI marked), complete all as specified.

Taking down shutters and refixing in same opening aluminium shutters exc 1sqm but n exc 2 sqm including minor accessories required for the proper function of the shutter, complete all as specified and as directed.

Door closer aluminium die cast body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs, complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Mild steel steel wire cloth 0.56 mm nominal dia of wire and aperture 1.18mm and fixed with tinned tacks or galvanized wire staple all as specified and directed at site

Mild steel steel wire cloth 0.56 mm nominal dia of wire and aperture 1.18mm and fixed with tinned tacks or galvanized wire staple, fixed in repairs, all as specified and directed.

25mm bore, decorative curtain rod made of MS pipe covered with coloured PVC layer with and including decorative ends knob, fixed in repairs, all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

Refixing Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, complete, all as specified and as directed.

0.80mm thick plain, Galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120grams/sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and as directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

4mm thick non asbestos fibre cement building boards laid / inserted to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work all as specified and directed.

PVC panelling made up of PVC hollow panels 25 / 30 cm in width and 10mm thickness, interlocking pattern, of approved shade and design, fixed to walls or ceilings all as per the manufacturer's instructions, fixed in repairs, complete all as specified and as directed.

Dismantling timber scantling as in fillets, rails, purlins, etc under 40 sq cm in section, in any position, in unframed work, complete all as specified.

2nd class hardwood in scantling clean sawn timber framed and fixed complete all as specified and directed.

2nd class hardwood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity including taking down old unsv tank, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity including taking down old unsv tank, complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms) fixed in repairs, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Bib tap cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repair, complete all as specified and directed.

Stop valve CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repair, complete all as specified and as directed.

Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Sink made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 495x420mm with bowl size 410x330x160mm, complete all as specified & directed.

Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe, fixed in repairs, complete all as specified and directed.

PVC connection 60cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Soap dish, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1131N or equivalent in Hindware / Parryware / Neycer

Grating doom 100mm dia of PTMT (Minimum weight 25 gms), fixed in repair, complete all as specified and as directed.

Corner Glass Shelf assembly (with bracket), fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1173 or equivalent in Hindware / Parryware / Neycer

Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.

PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repairs, complete all as specified & directed.

PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repairs, complete all as specified & directed.

PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.

110mm bore PVC (SWR) bends any radius, complete all as specified.

75mm bore PVC (SWR) bends any radius, complete all as specified.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity above exc 250 litre but up to 500 litre, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity exc 500 litre but not exc 1000 litre, complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

VEER TRADERS

M/S MAQBOOL AHMED BHAT

Bidder Name

M/S MAQBOOL AHMED BHAT

A S CONSTRUCTION

VEER TRADERS