Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs. lac)

Attach Chartered Accountant's Yearwise Statements.with audited profit and loss account

Note : Documents shall be attested by the Notary or Government Gazetted and original documents to be submitted at the time of opening of Technical bid for verification

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Note : Documents shall be attested by the Notary or Government Gazetted and original documents to be submitted at the time of opening of Technical bid for verification

Quantities of work executed as prime contractor (in the same name) during the last five years i.e., from 2015-16 to 2019-20

Year Name of Work Name of Employer Quantity of work performed Remarks(Indicate contract reference)

Earth work excavation in Cum Plain Cement Concrete (in Cum) Reinforced Cement Concrete (in Cum) Stone Masonry (in Cum) Brick Masonry (in Cum) Steel (in Qtl) Finishinh Items (in Sqm)

Attach Workdone Certificate for each work indicated above, obtained from the Competent Authority not below the rank of Executive Engineer or equivalent.

Note : Documents shall be attested by the Notary or Government Gazetted

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

6 Progress * : 2019

January February March April May June July August September October November December

Earth work excavation Physical in cum :

Financial in lac :

Plain Cement Concrete Physical in Cum :

Financial in lac :

Reinforced Cement Concrete Physical in cum :

Financial in lac :

Brick Masonry Physical in Cum :

Financial in lac :

Steel Physical is Qtl :

Financial in lac :

Finishinh Items Physical in Sqm :

Financial in lac :

Financial in lac :

Progress * : 2020

January February March April May June July August September October November December

Earth work excavation Physical in cum :

Financial in lac :

Plain Cement Concrete Physical in Cum :

Financial in lac :

Reinforced Cement Concrete Physical in cum :

Financial in lac :

Brick Masonry Physical in Cum :

Financial in lac :

Steel Physical is Qtl :

Financial in lac :

Finishinh Items Physical in Sqm :

Financial in lac :

Financial in lac :

Progress * : 2021

January February March April May June July August September October November December

Earth work excavation Physical in cum :

Financial in lac :

Plain Cement Concrete Physical in Cum :

Financial in lac :

Reinforced Cement Concrete Physical in cum :

Financial in lac :

Brick Masonry Physical in Cum :

Financial in lac :

Steel Physical is Qtl :

Financial in lac :

Finishinh Items Physical in Sqm :

Financial in lac :

Financial in lac :

Progress * : 2022

January February March April May June July August September October November December

Earth work excavation Physical in cum :

Financial in lac :

Plain Cement Concrete Physical in Cum :

Financial in lac :

Reinforced Cement Concrete Physical in cum :

Financial in lac :

Brick Masonry Physical in Cum :

Financial in lac :

Steel Physical is Qtl :

Financial in lac :

Finishinh Items Physical in Sqm :

Financial in lac :

Financial in lac :

Progress * : 2023

January February March April May June July August September October November December

Earth work excavation Physical in cum :

Financial in lac :

Plain Cement Concrete Physical in Cum :

Financial in lac :

Reinforced Cement Concrete Physical in cum :

Financial in lac :

Brick Masonry Physical in Cum :

Financial in lac :

Steel Physical is Qtl :

Financial in lac :

Finishinh Items Physical in Sqm :

Financial in lac :

Financial in lac :

Progress * : 2024

January February March

Earth work excavation Physical in cum :

Financial in lac :

Plain Cement Concrete Physical in Cum :

Financial in lac :

Reinforced Cement Concrete Physical in cum :

Financial in lac :

Brick Masonry Physical in Cum :

Financial in lac :

Steel Physical is Qtl :

Financial in lac :

Finishinh Items Physical in Sqm :

Financial in lac :

Financial in lac :

7 Stipulated Period of Completion (including monsoon)

8 Prescribed Date of completion

9 Actual Date of Completion/ Probable Date of Completion

10 Cost of balance work (if work is in progress) :

11 Reasons if any for delay in completion, if work completion is delayed :

12 Penalty if any imposed :

13 Any other information :

* Monthwise progress shall be furnished seperately.

Date: (Authorised Signatory)

Address for correspondence:

Note : Documents shall be attested by the Notary or Government Gazetted and original documents to be submitted at the time of opening of Technical bid for verification

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

Names of Works Item of Work Names of Employers 2019-20 Remarks (Indicate contract reference)

January February march April May June July August September October November December

Earthworks in cum Physical

Plain Cement Concrete (in Cum) Physical

Reinforced Cement Concrete (in Cum) Physical

Stone Masonry (in Cum) Physical

Brick Masonry (in Cum) Physical

Steel (in Qtl) Physical

Finishinh Items (in Sqm) Physical

Earthworks in cum Physical

Plain Cement Concrete (in Cum) Physical

Reinforced Cement Concrete (in Cum) Physical

Stone Masonry (in Cum) Physical

Brick Masonry (in Cum) Physical

Steel (in Qtl) Physical

Finishinh Items (in Sqm) Physical

Earthworks in cum Physical

Plain Cement Concrete (in Cum) Physical

Reinforced Cement Concrete (in Cum) Physical

Stone Masonry (in Cum) Physical

Brick Masonry (in Cum) Physical

Steel (in Qtl) Physical

Finishinh Items (in Sqm) Physical

Earthworks in cum Physical

Plain Cement Concrete (in Cum) Physical

Reinforced Cement Concrete (in Cum) Physical

Stone Masonry (in Cum) Physical

Brick Masonry (in Cum) Physical

Steel (in Qtl) Physical

Finishinh Items (in Sqm) Physical

Earthworks in cum Physical

Plain Cement Concrete (in Cum) Physical

Reinforced Cement Concrete (in Cum) Physical

Stone Masonry (in Cum) Physical

Brick Masonry (in Cum) Physical

Steel (in Qtl) Physical

Finishinh Items (in Sqm) Physical

Note : Documents shall be attested by the Notary or Government Gazetted and original documents to be submitted at the time of opening of Technical bid for verification.

Information on works which are yet to be completed.

(EXISTING COMMITMENTS AND ON-GOING WORKS)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Note : Documents shall be attested by the Notary or Government Gazetted.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Attach letters of Acceptance received.

Note : Documents shall be attested by the Notary or Government Gazetted.

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

List of Machineries Required

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

Note : Documents shall be attested by the Notary or Government Gazetted and original documents to be produced at the time of opening of Technical bid for verification.

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely............................................................................... ............................................................................................................................................... (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………....../- (inwards) .................................................................... ............................................................................................................................................... to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Note : Documents shall be attested by the Notary or Government Gazetted and original documents to be submitted at the time of opening of Technical bid for verification.

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

GOVT. OF KARNATAKA

PUBLIC WORKS DEPARTMENT

COMMUNICATION & BUILDINGS

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

ESTIMATED COST : 350.00 Lakhs.

HEAD OF ACCOUNT : 2059-080-053-4-00-200 ವಿವಿಧ ಇಲಾಖಾ ಟ್ಟಡಗಳ ದುರಸ್ತಿ/ನಿರ್ವಹಣೆ

INDENT NO-35040

OFFICE OF ASSISTANT EXECUTIVE ENGINEER PUBLIC WORKS DEPARTMENT SUVARNA SOUDHA SUB DIVISION, BELAGAVI

Name of Division PWD Belagavi Division Belagavi

Name of Sub-Division PWD, Suvarna Soudha Sub-Division

Fund Head 2059-080-053-4-00-200 ವಿವಿಧ ಇಲಾಖಾ ಟ್ಟಡಗಳ ದುರಸ್ತಿ/ನಿರ್ವಹಣೆ

Departement Head

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

This Estimate is framed in the Office of the Assistant Executive Engineer PWD Suvarna Soudha Sub-Dn. for the probable expense that will be incurred in for the above work.

Estimated Cost Rs. 350.00 Lakhs

Administratively approved under

Technically Sanctioned under

Estimate prepared by Shri.Akash Biradi,AE

Estimate Checked by Sri. Basavaraj Halagi Assistant Executive Engineer

------- Separate Sheet Enclosed-------

Assistant Executive Engineer, Public works Department Suvarna Soudha Sub-Division Belagavi. Executive Engineer, . Public works Department Belagavi Dn.Belagavi.

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

¸ÁªÀiÁ£Àå «ªÀgÀuÉ

ಬೆಳಗಾವಿ ಸುವರ್ಣ ವಿಧಾನ ಸೌಧ ಕಟ್ಟಡದಲ್ಲಿ 2025 ನೇ ಸಾಲಿನ ಚಳಿಗಾಲದ ಅಧಿವೇಶನದ ಪೂರ್ವದಲ್ಲಿ ಬೆಳಗಾವಿ ಸುವರ್ಣ ಸೌಧ ಕಟ್ಟಡದಲ್ಲಿ ಅತೀ ಅವಶ್ಯವಿರುವ ಕಾಮಗಾರಿಗಳನ್ನು ಕೈಕೊಳ್ಳಲು ಸರ್ಕಾರದ ಪತ್ರ ಸಂ:ಲೋ.ಇ/1041/ಐ.ಎಫ್.ಎ/2025/(ಇ-ಕಚೇರಿ) ದಿ:15.09.2025 ಹಾಗೂ ಮುಖ್ಯ ಇಂಜಿನಿಯರ ಸಂಪರ್ಕ ಮತ್ತು ಕಟ್ಟಡ(ಉ) ಧಾರವಾಡ ಕಚೇರಿ ಪತ್ರ ಸಂ: 05680,ದಿ:17.09.2025 ರಡಿ 2025-26ನೇ ಸಾಲಿನ2059-080-053-1-11-200 ಸುವರ್ಣ ಸೌಧ ಕಟ್ಟಡ ನಿರ್ವಹಣೆ ಅಡಿ ರೂ.135.೦೦ ಲಕ್ಷ ಅನುದಾನವನ್ನು ಹಂಚಿಕೆ ಮಾಡಿರುತ್ತಾರೆ. ಸದರಿ ಅನುದಾನದಲ್ಲಿ ಅತೀ ಅವಶ್ಯವಿರುವ ವಿವಿಧ ಕಾಮಗಾರಿಗಳನ್ನು ಕೈಕೊಳ್ಳಲು ರೂ.135.೦೦ ಲಕ್ಷ ಅನುದಾನದ "2025ನೇ ಸಾಲಿನಲ್ಲಿ ಬೆಳಗಾವಿ ಸುವರ್ಣ ಸೌಧ ಕಟ್ಟಡದಲ್ಲಿನ ಚಳಿಗಾಲದ ಅಧಿವೇಶನದ ಪೂರ್ವದಲ್ಲಿ ಕಟ್ಟಡದಲ್ಲಿನ , ಪಾಚಿ ಸ್ವಚ್ಚಗೊಳಿಸುವುದು , ಚಿಕ್ಕಮ್ಯಾಟ ದುರಸ್ತಿ ಹಾಗೂ ಹೊಸದಾಗೊ ಅಳವಡಿಸುವುದು ಆಯ್ದ ಭಾಗಗಳಲ್ಲಿ ಹಾಳಾದ ಪಾಲ್ಸ ಸೀಲಿಂಗ್‌ ದುರಸ್ತಿ ಮಾಡುವುದು, ಉತ್ತರ ಮತ್ತು ಪಶ್ಚಿಮದ ಮುಖ್ಯ ದ್ವಾರಗಳಲ್ಲಿ ಕೆಂಪು ಮ್ಯಾಟ್‌ ಅಳವಡಿಸುವುದು ವಿಧಾನಸಭೆ ಮತ್ತು ವಿಧಾನ ಪರಿಷತ್ ಸಭಾಂಗಣದಲ್ಲಿನ ಪಿಠೋಪಕರಣಗಳಿಗೆ ಪಾಲಿಶ್ ಮಾಡುವುದು, ಮತ್ತು ಇತರ ಅವಶ್ಯಕ ಕಾಮಗಾರಿಗಳನ್ನು ಕೈಕೊಳ್ಳುವುದು.." ಕಾಮಗಾರಿಗೆ ಅಧೀಕ್ಷಕ ಅಭಿಯಂತರು ಲೋ.ಇ ಬೆಳಗಾವಿ ವೃತ್ತ ಬೆಳಗಾವಿ ಇವರ ಪತ್ರ ಸಂ:0308/ದಿ:17-09-2025 ರಡಿ ಅನುಮೋದನೆಗೊಂಡಿರುತ್ತದೆ. ಸದರಿ ಕಾಮಗಾರಿಯ ರೂ135.೦೦ ಲಕ್ಷ ಮೊತ್ತದ ಅಂದಾಜು ಪತ್ರಿಕೆಗೆ ಆಡಳಿತಾತ್ಮಕ ಅನುಮೋದನೆಯನ್ನು ಮುಖ್ಯ ಇಂಜಿನಿಯರ ಸಂಪರ್ಕ ಮತ್ತು ಕಟ್ಟಡ (ಉತ್ತರ) ಧಾರವಾಡ ಇವರ ನೊಂದಣಿ ಸಂ: ಸಿ.ಇ.ಆರ್.163.ಸೆಪ್ಟೆಂಬರ 2025 ಹಾಗೂ ಪತ್ರ ಸಂ:೪೨೩೩ ದಿ:೨೧.೧೦.೨೦೨೩ ರಡಿ ನೀಡಲಾಗಿರುತ್ತದೆ. ಸದರಿ ಕಾಮಗಾರಿಯ ಅಂದಾಜು ಪತ್ರಿಕೆಯಲ್ಲಿ ಕಟ್ಟಡದಲ್ಲಿನ ಆಯ್ದ ಶೌಚಾಲಯಗಳಲ್ಲಿನ ಸೋರಿಕೆಯನ್ನು ತಡೆಗಟ್ಟಲು ಅವಶ್ಯವಿರುವ ತುರ್ತು ದುರುಸ್ತಿ ಕೆಲಸಗಳನ್ನು ಕೈಕೊಳ್ಳಲು ಪ್ರಸ್ತಾಪಿಸಲಾಗಿದೆ. ಕಟ್ಟಡದಲ್ಲಿನ ಮಹಡಿಗಳ ಕಾರಿಡಾರ್‌ಗಳಲ್ಲಿ ಅಳವಡಿಸಿರುವ ಚಿಕ್‌ಮ್ಯಾಟಗಳು ಇವುಗಳಿಗೆ ಹೆಚ್ಚಾಗಿ ಪ್ರಸ್ತುತವಾಗಿ ಪ್ರತಿ ವರ್ಷದಂತೆ ಮಳೆ ಮತ್ತು ತೇವಾಂಶದಿಂದ ಪುನ: ಬಹಳಷ್ಟು ಚಿಕ್‌ಮ್ಯಾಟಗಳನ್ನು ದುರಸ್ತಿ ಮತ್ತು ಆಯ್ದ ಸ್ಥಳಗಳಲ್ಲಿ ಹೊಸದಾಗಿ ಅಳವಡಿಸುವುದು ಅವಶ್ಯಕವಿರುತ್ತದೆ. ಕಟ್ಟಡದ ಗ್ರಾನೈಟ ಗೋಡೆಯ ಪಾಚಿಯನ್ನು ತೊಳೆಯುವ ಕಾಮಗಾರಿಯನ್ನು ಕೈಕೊಳ್ಳಲು ಪ್ರಸ್ತಾಪಿಸಲಾಗಿರುತ್ತದೆ. . ಕಳೆದ ೪-೫ ವರ್ಷಗಳಿಂದ ಕಟ್ಟಡದ ಇನ್ನಿತರ ಭಾಗಗಳಾದ ಸಂಪೂರ್ಣ ಗೋಡೆ, ಪ್ಯಾರಾಪಟ್ ಗೋಡೆ, ಗೋಲಾಕಾರದ ಕಾಲಂಗಳು, ರೇಲಿಂಗ್ ಗೋಡೆಗಳನ್ನು ತೊಳೆದಿರುವುದಿಲ್ಲ. ಪ್ರಸಕ್ತ ಸಾಲಿನಲ್ಲಿ ಪುನ: ಮಳೆಯಿಂದಾಗಿ ಸಂಪೂರ್ಣ ಕಟ್ಟಡದ ಬಹಳಷ್ಟು ಬಾಗದಲ್ಲಿ ಪಾಚಿ ನಿರ್ಮಾಣಗೊಂಡಿದ್ದು, ಕಟ್ಟಡದ ಸೌಂದರ್ಯದ ದೃಷ್ಟಿಯಿಂದ ಎಲ್ಲವನ್ನು ತೊಳೆಯುವುದು ಅತೀ ಅವಶ್ಯವಿರುವುದರಿಂದ ಕಾಮಗಾರಿಯನ್ನು ಕೈಕೊಳ್ಳುವುದು ಅವಶ್ಯವಿರುತ್ತದೆ. ವಿಧಾನಸಭೆ ಮತ್ತು ವಿಧಾನ ಪರಿಷತ್ ಸಭಾಂಗಣದಲ್ಲಿನ ಪಿಠೋಪಕರಣಗಳಿಗೆ ಪಾಲಿಶ್ ಮಾಡುವುದು, ಮತ್ತು ವಿಧಾನಸಭೆ ಮತ್ತು ಈ ಎಲ್ಲಾ ಕಾಮಗಾರಿಗಳನ್ನು ಕೈಕೊಳ್ಳಲು ಪರಿಗಣಿಸಿ ಒಟ್ಟು ರೂ.135.00 ಲಕ್ಷ ಮೊತ್ತದ ಅಂದಾಜು ಪತ್ರಿಕೆಯನ್ನು 2023-24ನೇ ಸಾಲಿನ ಏಕರೂಪ ದರಪಟ್ಟಿಯಂತೆ ಮತ್ತು ಕೆಲವೊಂದು ಕಾಮಗಾರಿಗಳಿಗೆ ಸೂಕ್ತ ದರಗಳು ಪ್ರಸ್ತುತ ಏಕರೂಪ ದರಪಟ್ಟಿಯಲ್ಲಿ ಲಭ್ಯವಿಲ್ಲದ ಕಾರಣ 2018-19ನೇ ಸಾಲಿನ ಲೋಕೋಪಯೋಗಿ ಇಲಾಖೆ ಬೆಳಗಾವಿ ವೃತ್ತದ ದರಪಟ್ಟಿಯಂತೆ ಮತ್ತು ಅಧೀಕ್ಷಕ ಅಭಿಯಂತರಉ ಲೋ.ಇ ಬೆಳಗಾವಿ ವೃತ್ತ ಬೆಳಗಾವಿ ಇವರು ಅನುಮೋದಿಸಿದ ದರಗಳಂತೆ ತಯಾರಿಸಲಾಗಿದ್ದು, ಅದರಂತೆ ಅಂದಾಜು ಪತ್ರಿಕೆಗೆ ತಾಂತ್ರಿಕ ಅನುಮೋದನೆಗಾಗಿ ವಿನಂತಿಸಿ ಸಲ್ಲಿಸಲಾಗಿದೆ.

CAzÁdÄ ¥ÀwæPÉAiÀÄ°è F PɼÀV£À PÁªÀÄUÁjUÀ¼À£ÀÄß PÉÊPÉƼÀî®Ä ¥Àæ¸ÁÛ¦¸À¯ÁVzÉ.

1 Cleaning of Pachi/Alage/dark patches on the exposed wall surface (Granite stone), Domes, Grand Steps, Parapet walls, etc

2 Repairs to Damaged Chikmats from Ground floor to Third Floor.and Provide new Chikmats in various selected Portions.

3 Supplying new Officers Tables, Chairs, Polishing of Assembly and Council Hall Chairs/wooden Panelling, etc., Alumnium Partition in Floors,Providing Red velevt Carpet (North and West Entrances)

4 Providing Sanitary items Such as Flush Plates,Health Faucets, Leakage Sanitary Plumbing works.

5 Repairs to damaged false ceiling at selected places due to dampness at lobbies corridors and other areas in Basement Floor, Ground Floor, First Floor, Second Floor and Third floor of Suvarna Soudha Building Belagavi,

6 Assembly Hall Lounge Mat Painting, and Painting for Various walls and Ceiling and Dampness Surfaced areas such as Minister Rooms, Meeting Halls, Corriodors and Hydroneumatic Pump House Painting and Small Grill Gates Painting etc.

7 LS provision for Emergency works, Unforeseen items, tender premium & roundoff.

Assistant Executive Engineer PWD Suvarna Soudha Sub Division Belagavi Executive Engineer PWD Division Belagavi

P.W.D.CODE PARA - 133

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

This is to certify that Shri Basavaraj Halagi , Assistant Executive Engineer,have personally visited spot and prepared the estimate using sanctioned scheduled of rates provided for the most economical and safe way of executing work.

Assistant Executive Engineer, Public Works Department Suvarna Soudha Sub-Dn.Belagavi

C E R T I F I C A T E.

(As required vide G.O.No.PWD SL.CMS.96 Dtd:27/6/1991)

Certified that, sufficient case has been taken while preparaing the estimate in respect of the above mentioned work to see that all necessary items which are technically required for the work in sufficient quantity are included while preparing the estimate,and specification of items included are completed and correct.

Assistant Executive Engineer, Public Works Department Suvarna Soudha Sub-Dn.Belagavi

C E R T I F I C A T E.

Certified that, the work proposed in this estimate has not been taken up under any other head/programme by any agency. The said work has not been included / proposed / over lapped in any other proposed or approved programme.

Assistant Executive Engineer, Public Works Department Suvarna Soudha Sub-Dn.Belagavi

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

RECAPITULATION SHEET

Sl.No Description Amount in Lakhs Cost including 18% GST

1 Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi. 28,110,951.93 1547954.4

2 Replacement of Old Doors and Windows Hardware Fixtures Various Ministers Rooms Halls/other rooms̤ 0.00 0.00 1342772.4 1308072.4624 34699.9376

3 Tender Premium 5% 1,658,546.16

4 LS provision for Emergency works, Unforeseen items, & roundoff. 4,675.94 34,995,324.06 200000 1,824,400.78

Assistant Executive Engineer, PWD Suvarna Soudha Sub-Dn. Belagavi Executive Engineer PWD Belagavi Division Belagavi

Superitending Engineer

Public Works Department

Belagavi Circle, Belagavi

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

S.N Description of Item Unit Qty Rate Amount

1 Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush complete as per direction of Engineer incharge of work. m2 10053.50 144.00 1447704.00 SR

2 Concrete Repair Cleaning the entire surface with waterjet , remove the lose Concrete and applying with SikaTop-122_HS(Fosroc/MYK/any other Equivalent Brands),a pre-batched one component polymer modified repair mortar, having bulk density of ~1.3 kg/l at 27 ºC and should exhibit following minimum physical properties: Compressive Strength at an ambient temperature of +30°C according to ASTM C109 on 70 mm Cube in 1 day ≥ 20 N/mm2 , in 7 days ≥ 35 N/mm2, in 28 days ≥ 55 N/mm; Flexural Strength at an ambient temperature of +30°C according to ASTM C293 in 7 days ≥ 3 N/mm2, in 28 days ≥ 5 N/mm2. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. The work is to be carried out as per the procedures and specified for the application by manufacture and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi. m2 4524.08 920.00 4162149.00 Data Rae

3 structural strengthening with Epoxy Injection Grout Providing and grouting with two component low viscous Moisture Insensitive Epoxy Injection Grout to strengthen the structure at cocrete cracks. The material having mixing ratio - (Base : Hardener) - 100:60 (by weight) compressive strength of 70N/mm2 in 7days as per BS6319:part 2, Flexural strength of 30N/mm2 in 7days as per BS6319:part 3, Tensile strength of 15N/mm2 in 7days as per BS6319:part 7, epoxy resin based injection grout meets the requirement of BS 6319 & ASTM C 881. The finished cost to include surface preparation, fixing of non-return valve injection packers at concrete cracks, seal the nozzles with polyester resin anchor grout Instant leak plug 0.2kg/nozzle. All the application procedure shall be as per the direction of the Engineer In charge. Nozzles 6330.00 1548.00 9798840.00 SR

4 Water Proofing of Terrace using 2k instant setting Polyurea Hybrid waterproofing membrane. Waterproofing: Providing and applying solvent free , 98-100% solids, two component, instant setting, Polyurethane hybrid spray applied waterproofing system Consist of Primer, Silica sand broadcasting and PU Hybrid waterproofing Fosroc/Sikalastic M 862/MYK/any other equivalent Brands. Post surface preparation application of epoxy primer shall be done & broadcasting sand 0.5-1.2 Silica graded Quartz sand over wet primer to create mechanical achoring followed by application of Waterproofing membrane all areas in horizontal and vertical face covering every possible area above parapet at 1.5-2mm total average DFT(exclusing sand and primer) to be applied at minimum consumption of min 1.8 kg per sqm including. wastage. as per approved manufactures specifications. The mixed product should have 98-100% solid content as per DIN 53213. - Tensile strength in Range of 6 Mpa as per ASTM D 412 - Elongation > 600% ASTM D 412 - Static Crack bridging 3.2mm as per EN1062-7 - Root Resistance - Resistant to standing water - Excellent crack bridging capability after only a few hours. UV Stable Top Coat: Post application of Fosroc/M800/MYK/any other equivalent Brands, the entire area to be protected with UV stable topcoat Master floor TC 368IN The work is to be carried out as per the procedures specified for the application by manufacturer and complete as per the directions of engineer-in-charge, The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi. m2 10053.50 1165.00 11712327.50 Data Rate

5 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. m3 20.00 2426.00 48520.00 SR

6 Expansion Joint Treatment with seal Tape Providing and laying with 1.0 mm thick FPO membrane to seal the expansion joint. The tape having mechanical properties like, Elongation >500%, Tensile Strength >12N/mm2, Tear Strength >200N, Water tightness 400 kPa/72hrs confirming to DIN EN 1928-B. Ensure that apply Two part Epoxy Adhesive @ 1.4kg/m to get 1-2mm thick on the prepared surface before placing the tape and after placing seal with same epoxy adhesive which having Bond Strength with concrete 1.5N/mm2, Compressive Strength @ 7 days, ≥45N/mm2 as per BS 6319 Part 2, Tensile Strength @ 7 days, ≥18N/mm2 as per BS 6319 Part 7, Shear Strength @ 7 days, ≥8N/mm2 as per BS 6319 Part 4, Flexural Strength @ 7 days, N/mm2 as per BS 6319 Part 3. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification. m 60.00 2039.00 122340.00 SR

7 Installation of Aluminium Plate: Providing and Fixing Architectrural Expansion Joint Cover System Comprising of 6063 T6/T4 grade aluminium profiles of 2.5 to 3mm Thickness, 300mm width and 3m length, The movement allowed upto +̲ 8 to +̲10mm and for joint width upto 25 to 35 mm fixing it with using of SS 304 grade 4mm thick x 50 mm screw with PVC plugs for fixing̤. The work is to be carried out as per the procedures and specified by the manufacturer and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi. m 60.00 2320.00 139200.00 Data Rate

Assistant Executive Engineer Executive Engineer 36458952.11 35000000 -1458952.11

Public Works Department Public Works Department 36620795.49 39500000 2879204.51

Suvarna Soudha Sub-Division Belagavi Belagavi Division Belagavi

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

Measurement Sheet

S.No. Discription Unit Nos L B D Qty

1 Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush complete as per direction of Engineer incharge of work.

Water Proofing on Suvarna Soudha Terrace Floor A and B Block m2 1 100.50 107.00 10753.5

Deduct Courtyard Area m2 -2 40.00 15.00 -1200

SE side C Block m2 1 50.00 10.00 500

2 Concrete Repair Cleaning the entire surface with waterjet , remove the lose Concrete and applying with SikaTop-122_HS(Fosroc/MYK/any other Equivalent Brands),a pre-batched one component polymer modified repair mortar, having bulk density of ~1.3 kg/l at 27 ºC and should exhibit following minimum physical properties: Compressive Strength at an ambient temperature of +30°C according to ASTM C109 on 70 mm Cube in 1 day ≥ 20 N/mm2 , in 7 days ≥ 35 N/mm2, in 28 days ≥ 55 N/mm; Flexural Strength at an ambient temperature of +30°C according to ASTM C293 in 7 days ≥ 3 N/mm2, in 28 days ≥ 5 N/mm2. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. The work is to be carried out as per the procedures and specified for the application by manufacture and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi.

Water Proofing on Suvarna Soudha Terrace Floor( 45% of Total Water Proofing area) m2 4524.075

3 structural strengthening with Epoxy Injection Grout Providing and grouting with two component low viscous Moisture Insensitive Epoxy Injection Grout to strengthen the structure at cocrete cracks. The material having mixing ratio - (Base : Hardener) - 100:60 (by weight) compressive strength of 70N/mm2 in 7days as per BS6319:part 2, Flexural strength of 30N/mm2 in 7days as per BS6319:part 3, Tensile strength of 15N/mm2 in 7days as per BS6319:part 7, epoxy resin based injection grout meets the requirement of BS 6319 & ASTM C 881. The finished cost to include surface preparation, fixing of non-return valve injection packers at concrete cracks, seal the nozzles with polyester resin anchor grout Instant leak plug 0.2kg/nozzle. All the application procedure shall be as per the direction of the Engineer In charge.

Water Proofing on Suvarna Soudha Terrace Floor Nozzles 1 6330

Total Nozzles 6330.00 348150

4 Water Proofing of Terrace using 2k instant setting Polyurea Hybrid waterproofing membrane. Waterproofing: Providing and applying solvent free , 98-100% solids, two component, instant setting, Polyurethane hybrid spray applied waterproofing system Consist of Primer, Silica sand broadcasting and PU Hybrid waterproofing Fosroc/Sikalastic M 862/MYK/any other equivalent Brands. Post surface preparation application of epoxy primer shall be done & broadcasting sand 0.5-1.2 Silica graded Quartz sand over wet primer to create mechanical achoring followed by application of Waterproofing membrane all areas in horizontal and vertical face covering every possible area above parapet at 1.5-2mm total average DFT(exclusing sand and primer) to be applied at minimum consumption of min 1.8 kg per sqm including. wastage. as per approved manufactures specifications. The mixed product should have 98-100% solid content as per DIN 53213. - Tensile strength in Range of 6 Mpa as per ASTM D 412 - Elongation > 600% ASTM D 412 - Static Crack bridging 3.2mm as per EN1062-7 - Root Resistance - Resistant to standing water - Excellent crack bridging capability after only a few hours. UV Stable Top Coat: Post application of Fosroc/M800/MYK/any other equivalent Brands, the entire area to be protected with UV stable topcoat Master floor TC 368IN The work is to be carried out as per the procedures specified for the application by manufacturer and complete as per the directions of engineer-in-charge, The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi.

Water Proofing on Suvarna Soudha Terrace Floor m2 1 10053.50

5 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

Water Proofing on Suvarna Soudha Terrace Floor m3 1 20

Total m3 20.00 1100

6 Expansion Joint Treatment with seal Tape Providing and laying with 1.0 mm thick FPO membrane to seal the expansion joint. The tape having mechanical properties like, Elongation >500%, Tensile Strength >12N/mm2, Tear Strength >200N, Water tightness 400 kPa/72hrs confirming to DIN EN 1928-B. Ensure that apply Two part Epoxy Adhesive @ 1.4kg/m to get 1-2mm thick on the prepared surface before placing the tape and after placing seal with same epoxy adhesive which having Bond Strength with concrete 1.5N/mm2, Compressive Strength @ 7 days, ≥45N/mm2 as per BS 6319 Part 2, Tensile Strength @ 7 days, ≥18N/mm2 as per BS 6319 Part 7, Shear Strength @ 7 days, ≥8N/mm2 as per BS 6319 Part 4, Flexural Strength @ 7 days, N/mm2 as per BS 6319 Part 3. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification.

Water Proofing on Suvarna Soudha Terrace Floor m 1 60 60

Total m 60.00 3300

7 Installation of Aluminium Plate: Providing and Fixing Architectrural Expansion Joint Cover System Comprising of 6063 T6/T4 grade aluminium profiles of 2.5 to 3mm Thickness, 300mm width and 3m length, The movement allowed upto +̲ 8 to +̲10mm and for joint width upto 25 to 35 mm fixing it with using of SS 304 grade 4mm thick x 50 mm screw with PVC plugs for fixing̤. The work is to be carried out as per the procedures and specified by the manufacturer and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi.

Water Proofing on Suvarna Soudha Terrace Floor m 1 60 60

Section Officer Assistant Executive Engineer

Public Works Department Public Works Department

Suvarna Soudha Sub Division Belgavi Suvarna Soudha Sub Div Belgavi

Concrete Repair Cleaning the entire surface with waterjet , remove the lose Concrete and applying with SikaTop-122 Plymer modified repair mortar, having bulk density of ~1.3 kg/l at 27 ºC and should exhibit following minimum physical properties: Compressive Strength at an ambient temperature of +30°C according to ASTM C109 on 70 mm Cube in 1 day ≥ 20 N/mm2 , in 7 days ≥ 35 N/mm2, in 28 days ≥ 55 N/mm; Flexural Strength at an ambient temperature of +30°C according to ASTM C293 in 7 days ≥ 3 N/mm2, in 28 days ≥ 5 N/mm2. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. The work is to be carried out as per the procedures specified for the application by manufacturer and complete as per the directions of engineer-in-charge The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi.

Concrete Repair Cleaning the entire surface with waterjet, remove the lose Concrete and applying with SikaTop-122HS(Fosroc/MYK/any other Equivalent Brands),a pre batched one component polymer modified repair mortar, having bulk density of 1.3 kg/l at 27 ºC and should exhibit following minimum physical properties: Compressive Strength at an ambient temperature of +30°C according to ASTM C109 on 70 mm Cube in 1 day ≥ 20 N/mm2, in 7 days ≥ 35 N/mm2, in 28 days ≥ 55 N/mm; Flexural Strength at an ambient temperature of +30°C according to ASTM C293 in 7 days ≥ 3 N/mm2, in 28 days ≥ 5 N/mm2. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. The work is to be carried out as per the procedures and specified for the application by manufacture and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi.

Concrete Repair Cleaning the entire surface with waterjet remove the lose Concrete and applying with SikaTop 122HS Fosroc MYK any other Equivalent Brands a pre batched one component polymer modified repair mortar having bulk density of 1.3 kg per litre at 27 degree and should exhibit following minimum physical properties Compressive Strength at an ambient temperature of 30 degree according to ASTM C109 on 70 mm Cube in 1 day 20 N per mm2 in 7 days 35 N per mm2 in 28 days 55 N/mm Flexural Strength at an ambient temperature of 30°C according to ASTM C293 in 7 days 3 N per mm2 in 28 days 5 N per mm2 The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof.The work is to be carried out as per the procedures and specified for the application by manufacture and complete as per the directions of engineer in charge and the work includes all the cost of materials labour transportation loading unloading charges at Suvarna Soudha Belagavi

Concrete Repair Cleaning the entire surface with waterjet remove the lose Concrete and applying with SikaTop 122HS Fosroc MYK any other Equivalent Brands a pre batched one component polymer modified repair mortar having bulk density of 1.3 kg per litre at 27 degree and should exhibit following minimum physical properties Compressive Strength at an ambient temperature of 30 degree according to ASTM C109 on 70 mm Cube in 1 day 20 N per mm2 in 7 days 35 N per mm2 in 28 days 55 N per mm Flexural Strength at an ambient temperature of 30 degree according to ASTM C293 in 7 days 3 N per mm2 in 28 days 5 N per mm2 The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. the work is to be carried out as per the procedures and specified for the application by manufacture and complete as per the directions of engineer in charge and the work includes all the cost of materials labour transportation loading unloading charges at Suvarna Soudha Belagavi

Concrete Repair Cleaning the entire surface with waterjet remove the lose Concrete and applying with SikaTop 122HS Fosroc MYK any other Equivalent Brands a pre batched one component polymer modified repair mortar having bulk density of 1.3 kg per litre at 27ºC and should exhibit following minimum physical properties Compressive Strength at an ambient temperature of 30 degree according to ASTM C109 on 70 mm Cube in 1 day 20 N per mm2 in 7 days 35 N per mm2 in 28 days 55 N per mm Flexural Strength at an ambient temperature of 30°C according to ASTM C293 in 7 days 3 N per mm2 in 28 days 5 N per mm2 The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof.The work is to be carried out as per the procedures and specified for the application by manufacture and complete as per the directions of engineer in charge and The work includes all the cost of materials labour transportation loading unloading charges at Suvarna Soudha Belagavi.

Water Proofing of Terrace using 2k instant setting Polyurea Hybrid waterproofing membrane. Waterproofing: Providing and applying solvent free , 98-100% solids, two component, instant setting, Polyurethane hybrid spray applied waterproofing system Consist of Primer, Silica sand broadcasting and PU Hybrid waterproofing Fosroc/Sikalastic M 862/MYK/any other equivalent Brands. Post surface preparation application of epoxy primer shall be done & broadcasting sand 0.5-1.2 Silica graded Quartz sand over wet primer to create mechanical achoring followed by application of Waterproofing membrane all areas in horizontal and vertical face covering every possible area above parapet at 1.5-2mm total average DFT(exclusing sand and primer) to be applied at minimum consumption of min 1.8 kg per sqm including. wastage. as per approved manufactures specifications. The mixed product should have 98-100% solid content as per DIN 53213. - Tensile strength in Range of 6 Mpa as per ASTM D 412 - Elongation > 600% ASTM D 412 - Static Crack bridging 3.2mm as per EN1062-7 - Root Resistance - Resistant to standing water - Excellent crack bridging capability after only a few hours. UV Stable Top Coat: Post application of Fosroc/M800/MYK/any other equivalent Brands, the entire area to be protected with UV stable topcoat Master floor TC 368IN The work is to be carried out as per the procedures specified for the application by manufacturer and complete as per the directions of engineer-in-charge, The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi.

Installation of Aluminium Plate: Providing and Fixing Architectrural Expansion Joint Cover System Comprising of 6063 T6/T4 grade aluminium profiles of 2.5 to 3mm Thickness, 300mm width and 3m length, The movement allowed upto +̲ 8 to +̲10mm and for joint width upto 25 to 35 mm fixing it with using of SS 304 grade 4mm thick x 50 mm screw with PVC plugs for fixing̤. The work is to be carried out as per the procedures and specified by the manufacturer and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi.

Providing water Proofing treatment to terrace Slab (Block A & Block B) and replacement of Various Damaged Conceled flush tank pumps in toilet blocks and Repairs of other sanitary related works in Suvarna Vidhana Soudha Building in Belagavi Taluk Belagavi.

S.I Description of Items P.no/I.no Unit Rate C.S.R 2023-24 Contiuned Final Rate

1 Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush complete as per direction of Engineer incharge of work. m2 144.00 144.00

2 Concrete Repair Cleaning the entire surface with waterjet , remove the lose Concrete and applying with SikaTop-122_HS(Fosroc/MYK/any other Equivalent Brands),a pre-batched one component polymer modified repair mortar, having bulk density of ~1.3 kg/l at 27 ºC and should exhibit following minimum physical properties: Compressive Strength at an ambient temperature of +30°C according to ASTM C109 on 70 mm Cube in 1 day ≥ 20 N/mm2 , in 7 days ≥ 35 N/mm2, in 28 days ≥ 55 N/mm; Flexural Strength at an ambient temperature of +30°C according to ASTM C293 in 7 days ≥ 3 N/mm2, in 28 days ≥ 5 N/mm2. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. The work is to be carried out as per the procedures and specified for the application by manufacture and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi. SEBC Approved Rates-7292-11-03-2026 m2 920.00 920.00

3 structural strengthening with Epoxy Injection Grout Providing and grouting with two component low viscous Moisture Insensitive Epoxy Injection Grout to strengthen the structure at cocrete cracks. The material having mixing ratio - (Base : Hardener) - 100:60 (by weight) compressive strength of 70N/mm2 in 7days as per BS6319:part 2, Flexural strength of 30N/mm2 in 7days as per BS6319:part 3, Tensile strength of 15N/mm2 in 7days as per BS6319:part 7, epoxy resin based injection grout meets the requirement of BS 6319 & ASTM C 881. The finished cost to include surface preparation, fixing of non-return valve injection packers at concrete cracks, seal the nozzles with polyester resin anchor grout Instant leak plug 0.2kg/nozzle. All the application procedure shall be as per the direction of the Engineer In charge. Nozzles 1548.00 1548.00 NSR

4 Water Proofing of Terrace using 2k instant setting Polyurea Hybrid waterproofing membrane. Waterproofing: Providing and applying solvent free , 98-100% solids, two component, instant setting, Polyurethane hybrid spray applied waterproofing system Consist of Primer, Silica sand broadcasting and PU Hybrid waterproofing Fosroc/Sikalastic M 862/MYK/any other equivalent Brands. Post surface preparation application of epoxy primer shall be done & broadcasting sand 0.5-1.2 Silica graded Quartz sand over wet primer to create mechanical achoring followed by application of Waterproofing membrane all areas in horizontal and vertical face covering every possible area above parapet at 1.5-2mm total average DFT(exclusing sand and primer) to be applied at minimum consumption of min 1.8 kg per sqm including. wastage. as per approved manufactures specifications. The mixed product should have 98-100% solid content as per DIN 53213. - Tensile strength in Range of 6 Mpa as per ASTM D 412 - Elongation > 600% ASTM D 412 - Static Crack bridging 3.2mm as per EN1062-7 - Root Resistance - Resistant to standing water - Excellent crack bridging capability after only a few hours. UV Stable Top Coat: Post application of Fosroc/M800/MYK/any other equivalent Brands, the entire area to be protected with UV stable topcoat Master floor TC 368IN The work is to be carried out as per the procedures specified for the application by manufacturer and complete as per the directions of engineer-in-charge, The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi. SEBC Approved Rates-7292-11-03-2026 m2 1165.00 1165.00 NSR

5 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. m3 2426.00 2426.00 NSR

6 Expansion Joint Treatment with seal Tape Providing and laying with 1.0 mm thick FPO membrane to seal the expansion joint. The tape having mechanical properties like, Elongation >500%, Tensile Strength >12N/mm2, Tear Strength >200N, Water tightness 400 kPa/72hrs confirming to DIN EN 1928-B. Ensure that apply Two part Epoxy Adhesive @ 1.4kg/m to get 1-2mm thick on the prepared surface before placing the tape and after placing seal with same epoxy adhesive which having Bond Strength with concrete 1.5N/mm2, Compressive Strength @ 7 days, ≥45N/mm2 as per BS 6319 Part 2, Tensile Strength @ 7 days, ≥18N/mm2 as per BS 6319 Part 7, Shear Strength @ 7 days, ≥8N/mm2 as per BS 6319 Part 4, Flexural Strength @ 7 days, N/mm2 as per BS 6319 Part 3. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification. m 2039.00 2039.00 issue rate NSR

7 Installation of Aluminium Plate: Providing and Fixing Architectrural Expansion Joint Cover System Comprising of 6063 T6/T4 grade aluminium profiles of 2.5 to 3mm Thickness, 300mm width and 3m length, The movement allowed upto +̲ 8 to +̲10mm and for joint width upto 25 to 35 mm fixing it with using of SS 304 grade 4mm thick x 50 mm screw with PVC plugs for fixing̤. The work is to be carried out as per the procedures and specified by the manufacturer and complete as per the directions of engineer-in-charge and The work includes all the cost of materials, labour, transportation, loading, unloading charges at Suvarna Soudha Belagavi. SEBC Approved Rates-7292-11-03-2026 m 2320.00 2320.00 NSR

Assistant Executive Engineer Executive Engineer

Public Works Department Public Works Department

Suvarna Soudha Sub-Division Belagavi Belagavi Division Belagavi

Superintending Engineer

Public Works Department

Belagavi Circle Belagavi

Repairs to selected toilets rooms/WCs in suvarna soudha building

S.N Description of Item Unit Qty Rate Amount

1 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Thickness above 40 mm up to 75 mm. sqm 27.83 292.00 8126.36

2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge sqm 27.83 37.00 1029.71

3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal dia pipes. m 23.00 379.00 8717.00

4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per direction of Engineer in Charge.32 mm nominal dia pipes. m 23.00 557.00 12811.00

5 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 6.40090 8159.00 52224.94 52224.9431 0.00

6 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Sqm 27.83 3934.00 109483.22

7 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 27.83 240.00 6679.20

8 Providing and fixing Flush Tank of Geberit/ any other equivalent company of Fibre/Plastic material with dual flush ranging from 3 litrs to 6 litres with adjestable flush volume of dimension Height 79cmX Width 66cm X thickness 13cm with steel mounted frame with fastening brackets including all materials ,labour ,loading and unloading in the presence of Engineer's incharge each 23.00 15000.00 345000.00

9 Providing and fixing Hindware concealed Flush plates with necessary fixtures including brackets consumables testing etc complete - conceal 120mm 505206 APDICC -120/07, including all materials ,labour ,loading and unloading in the presence of Engineer's incharge at Suvarna Soudha Belagavi each 23.00 2800.00 64400.00

10 Providing and fixing 3/4" CPVC Elbow for pipe to pipe connection including all materials, labour charges etc each 25 28.00 700.00

11 Providing and fixing 3/4" CPVC Tee for pipe to pipe connection including all materials, labour charges etc each 25 45.00 1125.00

12 Providing and fixing 3/4" CPVC Tee for pipe to pipe connection including all materials, labour charges etc each 25 45.00 1125.00

13 Providing and fixing 3/4" Brass Elbow for pipe to tap connection rincluding all materials, labour charges etc each 25 90.00 2250.00

14 Providing and fixing 3/4" Brass FTA for pipe to tap connection including all materials, labour charges etc each 20 260.00 5200.00

15 Providing and fixing Gaberit/ any equivalent branded Ball valve to conceled flash tank including all materials, labour charges etc each 12 3500.00 42000.00

16 Providing and fixing Holding Brackets with push plate sticks for conceled flush tank including all materials, labour charges etc each 10 1900.00 19000.00

Total 679871.43

Assistant Executive Engineer Executive Engineer

Public Works Department Public Works Department

Suvarna Soudha Sub-Division Belagavi Belagavi Division Belagavi

Repairs to selected toilets rooms/WCs in suvarna soudha building

Measurement Sheet

S.No. Discription Unit Nos L B D Qty

1 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Thickness above 40 mm up to 75 mm.

2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge

3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal dia pipes.

Total m 23.00 690

4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per direction of Engineer in Charge.32 mm nominal dia pipes.

Total m 23.00 759

5 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.

Total cum 6.40 211.2297

6 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Total sqm 27.83 918.39

7 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

8 Providing and fixing Flush Tank of Geberit/ any other equivalent company of Fibre/Plastic material with dual flush ranging from 3 litrs to 6 litres with adjestable flush volume of dimension Height 79cmX Width 66cm X thickness 13cm with steel mounted frame with fastening brackets including all materials ,labour ,loading and unloading in the presence of Engineer's incharge

Total Each 23 30

9 Providing and fixing Hindware concealed Flush plates with necessary fixtures including brackets consumables testing etc complete - conceal 120mm 505206 APDICC -120/07, including all materials ,labour ,loading and unloading in the presence of Engineer's incharge at Suvarna Soudha Belagavi

Total Each 23 30

10 Providing and fixing 3/4" CPVC Elbow for pipe to pipe connection including all materials, labour charges etc

11 Providing and fixing 3/4" CPVC Tee for pipe to pipe connection including all materials, labour charges etc

12 Providing and fixing 3/4" CPVC Tee for pipe to pipe connection including all materials, labour charges etc

13 Providing and fixing 3/4" Brass Elbow for pipe to tap connection rincluding all materials, labour charges etc

14 Providing and fixing 3/4" Brass FTA for pipe to tap connection including all materials, labour charges etc

15 Providing and fixing Gaberit/ any equivalent branded Ball valve to conceled flash tank including all materials, labour charges etc

16 Providing and fixing Holding Brackets with push plate sticks for conceled flush tank including all materials, labour charges etc

Section Officer Assistant Executive Engineer

Public Works Department Public Works Department

Suvarna Soudha Sub Division Belgavi Suvarna Soudha Sub Div Belgavi

Repairs to selected toilets rooms/WCs in suvarna soudha building

S.I Description of Items P.no/I.no Unit Rate C.S.R 2023-24 Contiuned Final Rate

1 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Thickness above 40 mm up to 75 mm. vol-2, I.no-19.39.2, Pg no-191 sqm 292.00 292.00

2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge vol-2, I.no-19.55, Pg no-193 sqm 37.00 37.00

3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal dia pipes. vol-2, I.no-13.32.2, Pg no-122 rmt 379.00 379.00 NSR

4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cuttingchases and making good the same including testing of joints complete as per direction of Engineer in Charge.32 mm nominal dia pipes. vol-2, I.no-13.32.4, Pg no-122 rmt 557.00 557.00 NSR

5 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. vol-2, I.no-6.7, Pg no-13 cum 8159.00 8159.00 issue rate NSR

6 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (vol-2, I.no-10.1.2 , Pg no-69) sqm 3934.00 3934.00 issue rate NSR

7 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (vol-2, I.no-8.1.2 , Pg no-41) sqm 240.00 240.00 issue rate NSR

8 Providing and fixing Flush Tank of Geberit/ any other equivalent company of Fibre/Plastic material with dual flush ranging from 3 litrs to 6 litres with adjestable flush volume of dimension Height 79cmX Width 66cm X thickness 13cm with steel mounted frame with fastening brackets including all materials ,labour ,loading and unloading in the presence of Engineer's incharge (SE approval letter no 04544 dt 01.12-2025) each 15000.00 15000.00 NSR

9 Providing and fixing Hindware concealed Flush plates with necessary fixtures including brackets consumables testing etc complete - conceal 120mm 505206 APDICC -120/07, including all materials ,labour ,loading and unloading in the presence of Engineer's incharge at Suvarna Soudha Belagavi (SE approval letter no 04544 dt 01.12-2025) each 2800.00 2800.00 NSR

10 Providing and fixing 3/4" CPVC Elbow for pipe to pipe connection including all materials, labour charges etc (SE approval letter no 04544 dt 01.12-2025) each 28.00 28.00

11 Providing and fixing 3/4" CPVC Tee for pipe to pipe connection including all materials, labour charges etc (SE approval letter no 04544 dt 01.12-2025) each 45.00 45.00

12 Providing and fixing 3/4" CPVC Tee for pipe to pipe connection including all materials, labour charges etc (SE approval letter no 04544 dt 01.12-2025) each 45.00 45.00

13 Providing and fixing 3/4" Brass Elbow for pipe to tap connection rincluding all materials, labour charges etc (SE approval letter no 04544 dt 01.12-2025) each 90.00 90.00

14 Providing and fixing 3/4" Brass FTA for pipe to tap connection including all materials, labour charges etc (SE approval letter no 04544 dt 01.12-2025) each 260.00 260.00

15 Providing and fixing Gaberit/ any equivalent branded Ball valve to conceled flash tank including all materials, labour charges etc (SE approval letter no 04544 dt 01.12-2025) each 3500.00 3500.00

16 Providing and fixing Holding Brackets with push plate sticks for conceled flush tank including all materials, labour charges etc (SE approval letter no 04544 dt 01.12-2025) each 1900.00 1900.00

Assistant Executive Engineer Executive Engineer

Public Works Department Public Works Department

Suvarna Soudha Sub-Division Belagavi Belagavi Division Belagavi

Superintending Engineer

Public Works Department

Belagavi Circle Belagavi