KNMT 2024-25 Rejuvenation of Water Bodies at Anjeneyar Kulam in Kilpennathur Town Panchayat

Amount

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Earthwork excavation for foundation to the full depth as may be directed by departmental officers in all types of soils except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary, refilling the side

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated inclu

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sh

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labou

Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadam for 150mm thick specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform l

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63 mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc.,

Supply and Fixing of GI Pipe 32 mm dia 9B -Class) including cutting and fixing in to kerb wall for 30 CM depthincluding fixing Weld mesh 7.50CM X5 CM 10 gauge and fixing weld mesh with MS angle 35x35 x6 mm alround and MS Flat 45x6 mm at middle including cost and conveyance of all materials and labour charges to site etc., complete.

Painting Priming coat on new Iron works with ready mixed primer of approved quality -10m2

Supply and GI STEEL TUBULAR POLE FOR STREET 6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.

Reinforcement Cement Concrete 1:1/2:3 (One cement, One & Half sand, Three aggregate ) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supply and Fixing of 48W LED Street Light Fitting with LED Including Cost and Conveyance As Per Standard Specifications.