CONSTRUCTION OF 96 X OR MD ACCN AT DSSC WELLINGTON.

Amount

Lumpsum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the tenderer for SITE CLEARANCE/ AREA DEVELOPMENT/ EARTHWORK EXCAVATION/ REMOVING SPREADING & LEVELLING as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for ROADS /PATH /CULVERTS as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for PROTECTIVE WORKS as listed in Schedule ‘A’ Part- VIII

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part- IX

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part- X

Lumpsum price worked out by the tenderer for FENCING AND GATE as listed in Schedule ‘A’ Part- XI

Lumpsum price worked out by the tenderer for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part- XII

SCHEDULE `A' PART - XIII (MISCELLENOUS ITEMS) is not prepriced by MES .

S & F wall / surface mounted LED light fitting 20 W or next higher rating (4 FT), IP 20, CRI > 80, CT> 6500 K, THD<10% with powdered coated aluminium housing & integrated electronic driver (SMPS based constant current supply) with output short-circuit protection, surge protection asper IS:15885 Part 2/Sec 18 with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make : Havells, Cat No : ENDURALINEARNEOBS20 WLED865SPCWH or Make : Philips, Cat No : BN100C LED20S-6500 PSU L120 GR S4, Model : Smart Bright Xtra S4 or Make : Wipro, Cat No : LL20-111-XXX-65AL12FT, Model : Trim Neo/LL20

S&F 5 Watt LED lamp 3-Star rated to be fixed on lamp holder complete all as specified and as directed.

S & F wall / surface mounted LED light fitting 10 W or next higher rating (2 FT), IP 20, CRI > 80, CT> 6500 K, THD<10% with powdered coated aluminium housing & integrated electronic driver (SMPS based constant current supply) with output short-circuit protection, surge protection asper IS:15885 Part 2/Sec 18 with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make : Havells, Cat No : ENDURALINEARNEOBS10W LED865SPCWH or Make : Philips, Cat No : BN021 LED12S 6500 PSU GR, Model : Smart Bright or Make : Wipro, Cat No : LL20-281-XXX-65AL14FT, Model : Trim Neo/LL20

S & F TV socket complete all as specified and directed.

S&F VTPN DB 6 way, double door having IP 43 protection with isolated neutral bar, insulated bus bar assembly, door earthing, mechanical impact strength ik 08, 8 + 12 modules complete all as specified and as directed.

S&F DX RCCBs 4 Pole 80 Amps 415 V, A-S 300mA, ISI marked as per IS 12640-1 having integrated label holder, ergonosmic grey colour dolly sliding bottom clamp colour coded On/Off indication on dolly biconnect lower terminals having IP 20 protected terminals 35 sqmm terminals sliding shutters complete all as specified and as directed.

S&F MCB DB SPN 8 way, having degree of protection as per IP 43 with metal door (double door) 230 Volts complete with 100 Amps rated copper bus bar with neutral link with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 2 + 6 with blanking plates etc, complete all as specified and as directed by Engr-in-Charge.

S & F MCB SPN 32 Amps, 240 Volts,10 KA, "C" series complete all as specified and as directed.

S & F MCB SP 6-32 Amps,240 Volts,10 KA, "C" series complete all as specified and as directed. Note for Sl Item Nos 17 TO 21 : Make of MCBs & MCB DBs shall be the same.

M & L for laying DWCPE sewage pipe line 150mm dia of pipe including sealing of joint, fittings etc., with collars complete all as specified and as directed.

M & L for laying DWCPE sewage pipe line 200mm dia of pipe including sealing of joint, fittings etc., with collars complete all as specified and as directed.

Supply and fix Ductile Iron fitting confirming to IS 9523 K 12 ,suitable for spigot and socket pipes of class K 9 upto 250 mm bore such as bends (any type of radius and angle ) tappers any type , (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch.Y junction double branch Cross collars caps Plug etc including rubber gasket joints & testing complete all as specified & directed. Note:- The Make of DI Fittings and DI pipes shall be the same.

Supply, Laying, jointing & testing of Ductile iron (DI), 150mm dia pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length laid in trenches including testing complete all as specified and as directed. Note : Excavation and earth work shall be measured and paid separately.

Supply, Laying, jointing & testing of Ductile iron (DI), 100mm dia pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length laid in trenches including testing complete all as specified and as directed. Note : Excavation and earth work shall be measured and paid separately.

M & L for construction of brick masonary valves pit of internal dimensions 900mm x 900 mm x 900 mm complete and fabrication of 3.15 mm thick MS Sheet cover and angle iron frame made out of 50mm x 50mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as specified and as directed.

M&L for construction of brick masonary valves pit of internal dimensions 1200mm x 1200 mm x 1200 mm complete and fabrication of 3.15 mm thick MS Sheet cover and angle iron frame made out of 50mm x 50mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as specified and as directed.

Supply, laying, connecting and testing of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm including necessary end connector fixed along with Street Light Poles etc,for electrical connection from junction box to street light fitting complete all as specified and directed.

S & F loop in- loop out junction box,Maintenance free, tamper and rot proof, Fire retardant,IP55 with approx internal dimension 200x140x95mm (HxWxD) or next higher size made out of FRP sheet,Cable entry from top-1 No and bottom-2 Nos with weather proof canopy including din rail with including 01 No MCB SP C series 10 KA of 10 Amps rated and 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular poles including necessary aluminium clamps, suitable double compression cable glands, lugs and GI nut and bolts complete all as specified and directed.

S & F, IP 65, Class I, energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium 25 W or next higher rating Post Top Lantern with high Power LEDs as light source with CT >= 5700 K integrated type operating range – 140 to 270 V, 50 Hz fixed on pipe of appropriate size/dia complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size from junction box to fitting all as specified and as directed. Make: Havells, Cat No : CORALPT25WLED757PSYM TOPC or Make : Wipro, Cat No : LP07-431-XXX-57-CL, Model : Post Top/LP07 or techno-commercially equivalent in Philips

Supply,fix and test LED Street light fitting of rating 60 Watts, 6000 Lumens output IP-66 protection including driver unit suitable for working voltage 140-270 V AC, 50 Hz, pressure die cast aluminium housing and finishing epoxy powder coated grey colour after phospho chromate treatment with all accessories including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 3 Nos including nut and bolts for fixing the bracket on the pole including one coat of primer and two coat of aluminium paint and connecting up complete all as specified and directed. Make: Havells, Cat No : ENDURAPEARLNEOSL60W LED757PASYTOPCAST or Make : Philips, Cat No : BRP032 LED60 CW SLR GR PSU, Model : Smart Bright Street or Make : Wipro, Cat No : LR02-671-XXX-57-G3, Model : Skyline/LR02

Supply, install, testing & commissioning of Main LT control panel board "out-door type" of size 1500 mm (height) x 1200 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & High grade aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) & incl the following accessories complete all as specified & as directed : (MAIN LT PANEL FOR 96 NOS OF ORs QTRS)

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 700 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands complete all as specified and as directed. INCOMING : (a) MCCB 4P (Ics = 100% Icu) with adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 500 to 630 A - 01 Nos. Make : L & T, Cat No : CM94106OOT1OG or any techno-commercially equivalent in Legrand/ABB/Seimens. OUTGOINGS : (a) MCCB 4P (Ics = 100% Icu) with adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 160-200 A - 04 No (3W+1S). Make : L & T, Cat No : CM90642OONO or any techno-commercially equivalent in Legrand/ABB/Seimens. (b) MCCB 4P (Ics = 100% Icu) with adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 100-125 A - 01 No Make : L & T, Cat No : CM90642OOLO or any techno-commercially equivalent in Legrand/ABB/Seimens. (c) Time Switch 415 V, 3 Phase of 20 A rating with Contactor - 02 Sets Make for Time Switch : L&T, Cat No : AUTS02AST00, Make of Contactor : L&T, Cat No : CS 94567 or any techno-commercially equivalent in Legrand/ABB/Seimens .

Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & High Grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) complete all as specified & as directed with & incl the following accessories : (DISTRIBUTION LT PANEL FOR OR QTRS BLOCK NOS 1 to 3 & 4 to 6)

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 300 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands INCOMING : (a) MCCB 4P (Ics = 100% Icu) with adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 160-200 A - 01 No. Make : L & T, Cat No : CM92109OON1OG or any techno-commercially equivalent in Legrand/ABB/Seimens. OUTGOINGS : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 25 KA & of rating 50-63 A - 04 Nos(3W+1S).

Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & High Grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) complete all as specified & as directed with & incl the following accessories : (DISTRIBUTION LT PANEL FOR ORs QTRS BLOCK NOS 7 & 8)

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 200 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4P (Ics = 100% Icu) with adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 100-125 A - 01 No OUTGOINGS : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 25 KA & of rating 50-63 A - 03 Nos(2W+1S).

Supply and fix Cable Jointing kit, LT End Termination OUTDOOR Heat shrink type joint complete with jointing material and accessories suitable for 1.1 KV ,3.5 core XLPE armoured Al conductor cable of size 400 Sqmm complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick eaves gutter, 200mm dia, half round with rounded edges, drop ends (spigot & socket ends) or nozzles or stop ends as required.

Supply, Install, Commissioning & testing of Microprocessor Based Single Phase Tamper proof electronic smart static energy meter, surface mount type and of rating 230 Volts, 50HZ, of range 10-60 Amps, confirming to IS 16444 with LED display and parameters like Voltage, Current, Frequency, Power, PF, KWh/KVA/KVAh, Inbuilt LoRa Communication, suitable for outdoor LoRa data accumulator and compatible to GPRS communication for online Energy Monitoring / Billing System, with Disconnection/Reconnection through remote software / data export to ERP complete all as specified and as directed.

M&L for hot pressed moulded SMC Meter box of thickness 16 SWG and Size 1000 (H) x 690 (W) x 215 (D) mm or next higher size with locking arrangement with viewing glass and earth bolt fixed flush to wall & making good the disturbed surfaces for mounting MCB TPN DB/ Energy meters etc. including painting/marking of Qtr No below the meter incl electric connection complete all as specified and as directed. Make : Sintex, Cat No GSMB-10069 or techno-commercially equivalent in Hensel/Rittal/OBO.

S&F Outdoor LoRa accumulator for long range communication suitable for communicating with postpaid meter with LoRa communication protocol and the data transfer to the existing Elmeasure Elnet V5 Software complete all as specified and as directed by Engr-in-Charge. Make: Elmeasure or techno-commercially equivalent in L&T/Secure Meters.

varsha construction

P Natesan and Co

SHAIJAL T M

United Sales Corporation

CREATIVE BUILDERS