Construction of Ward room at beside Primary Health Center I.D.Halli Village in Madhugiri Taluk (Reserved for SC Category)

Construction of Ward room at beside Primary Health Center I.D.Halli Village in Madhugiri Taluk (Reserved for SC Catagory)

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ram...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Coursed rubble masonry second sort with hard stone in foundation & plinth with Cement mortar 1:6 1 cement : 6 coarse as per directions of Engineer in charge.

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar as per directions of Engineer in charge.

Providing Flush/ Ruled pointing Pointing on stone work with cement mortar 1:3 1 cement 3 fine sand after raking joints to depth nicely lin-ing, including cost of materials, labour, curing as per speci...

Additionalities for Formwork, Centering 1. Foundation upto plinth a) Isolated - 8% as per directions of Engineer in charge.

Additionalities for Formwork, Centering 1.Plinth Beams of building a) Isolated - 50% as per directions of Engineer in charge.

Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Additionalities for Formwork, Centering 8. CC Columns / Shaft Slip Centering as per directions of Engineer in charge.

Additionalities for Formwork, Centering 12 RCC Beams, Lintels & Troughs of Aqueducts Building - 60% as per directions of Engineer in charge. as per directions of Engineer in charge.

Additionalities for Formwork, Centering -15 RCC Roof Slab - 50% as per directions of Engineer in charge.

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/t...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 1 cement : 6 coarse sand inclu...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied 1.67 ltr/10 m² over and including priming coat of exterior primer applied 2.20 kg/10 m² with paint of...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work two coats over and including water thinnable priming coat with cement primer after thoro...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screw...

Providing & fixing of 3track 2panel sliding windows made out of multi chambered UPVCMatching to RAL-9016 sections and with minimumTitanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead fr...

Providing and fixing polyurethane foam (PUF) slab 40mm thick average with PU slab density 362 kg/m for external wall insulation including necessary polymerized plaster reinforced with glass fibre mesh...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal exxp...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The condu...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135X75X65mm as per directions...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200x200x65mm

Supplying and fixing PVC/metal conduit Deep junction box - 32 mm deep Junction box as per directions of Engineer in charge.

Supplying And Fixing Metal Fan Box with Round Hook. as per directions of Engineer in charge.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., 6) 16-18 Way

Supplying and fixing of modular switch & connected accessories on existing modular switch plate 1) 6A One Way Switch as per directions of Engineer in charge.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate 2) Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate 3) 16A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate 4) 6/16A Universal Socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate 5) RJ45/I.O Outlet Cat-6

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board.pole as per directions of Engineer in charge.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 50 cycles. Single phase AC supply conforming and with double ball bearing system. 48" S...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of inch...

Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours lumen maintenance with CRI 80. Power Input: Power factor 0.9 along with CE appr...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Providing and fixing white vitreous china water closet squatting pan (Indian type)Long pattern W.C. pan of size 580 mm as per directions of Engineer in charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ove...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with...

White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap as per directions of Engineer in charge.

Providing and fixing brass stop cock of approved quality 20 mm nominal bore as per directions of Engineer in charge.

Providing and fixing PVC SWR Nahani Trap 10cms 10cms with all fitting arrangements & all necessary accessories complete 50 mm nominal bore

Supplying Class RCC spun pipes safe for 4 kg cm test pressure to work spot including cost of all materials machinery labour taxes duties levies royalty & all necessary works as applicable 1100 mm dia...

Providing PVC ringtite pipes conforming to with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing an...