SPECIAL REPAIRS TO DRAIN LINES , UPRADARION OF SECURITY OFFICE AND PROVISION OF INCINERATOR AT DMDE OFFICE COMPLEX UNDER GE (I) RND KANCHANBAGH

Amount

Cutting into existing manholes for connecting new drains of internal dia of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required complete all as directed.

Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed

M&L for cement concrete bed (1:3:6) type C2 to drain pipe 200 mm bore including packing under and hunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.

M&L for Plain Cement Concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, benching including necessary from work including demolition of existing PCC work complete all as directed.

M&L for 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old existing pipe complete all as directed

M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation including demolition of concrete, complete all as directed.

M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including demolition of old brick work complete all as directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

Retuning, filling in, including spreading levelling , watering and wall ramming in laying not exc 25 cm thick complete all as directed.

Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed.

M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slabs, set in cement mortar (1:4) for manholes including necessary including demolition of old broken RCC cover, slabs and form work complete all as directed. Note:- Reinforcement required will be measured & paid for separately.

S&F TMT bars 8 mm dia cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.90 mm dia complete all as directed.

S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' including demolition of old/damaged gully trap complete all as directed.

M & L for salt glazed stoneware drain pipe of 150mm internal dia of grade 'A' laid in trenches and jointed in cement mortar (1:2) including taking down old unserviceable pipe complete all as directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in surface channels and drains including demolition of old concrete complete all as directed.

M&L for cement concrete (1:2:4) type B0(using 12.5mm graded aggregate) in copings including demolition of old concrete complete all as directed.

M&L for framed work in repairs such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors, iron sheets; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and appying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness below or above ground level, removal of rubbish and debris outside MOD land complete all as directed.

M&L for plain cement concrete (1:4:8) type D2 using 40mm graded aggregate as in sub base of floor, foundation, filling and mass concrete complete

M&L for 50 mm thick Cement concrete type B-2, (1:2:4) (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for chequered cement concrete tile machine pressed PU coated with grey cement and pigment of size 300x300x19/20mm laid over screed bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

S&F factory made PCC kerb stone of size 600x250x100mm thick as in sides of paths, jointed in CM (1:4) including dismantling of old stones complete all as directed

M&L preparation of new or previously untreated surfaces of brick, stone, concrete asbestos or plaster surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint ( plaster coat) complete.

Cleaning of Septic tanks of 150 uesrs capacity by dewatering mechanically all the water, taking out the sludge/night soil, cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MoD land, complete all as directed.

Cutting of any type and size tree branches and digging of tree roots up to 0.60m depth and spry roots killing chemical and disposal of cutted tree branches, digged roots outside MOD land and clear the suface.

M & L for precast cement interlocking tiles / paver block, machine pressed of any shape and size as approved by GE, in M-35 grade and 60 mm thick with grey cement and pigment laid and bedded on 20mm thick sand cushioning complete all as directed.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.

M&L for steel anchor bolts of length 15cm long, dia of neck 10 to 12 mm complete fixed in position complete all as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L for Preparing newly plastered surfaces and applying two coats of Premium emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of Premium emulsion paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge.

M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- APEX of ASIAN paint or Equalent

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed

M&L for preparation of old painted steel/iron surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as directed

M & L for 75 mm thick cement concrete (1: 4 :8) type C-2, (using 40 mm graded stone aggregate) as in plinth protection and making joints and filling with bitumen sand mastic including necessary form work.

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade, as in floors/pavings laid over 50 mm thick sand cushioning layer including dismantling existing floor tile of any description complete in all respect and all as specified. Make : NAVEEN/SPARTEK/NITC

M&L 18 mm thick granite work in steps, jambs, pillars, window cills, cooking platforms, landings and like incl 10 mm thick screed bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges,including demolition of old granite of any thickness complete, all as specified and directed.

S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain and brass fittings and fixed complete to wall or laid in floor and Including taking down existing pipe line complete all as directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with head , screwed down, screwed for iron pipe complete all as directed.ISI marked.

S&F in repairs angle valve fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.ISI marked

S&F Stainless steel railing made out of 304 grade steel with following specifications :

(a) Stainless steel hand rail of 50mm dia including bending at turns,welding and polishing complete (b) Stainless steel cross bars three nos 20mm dia fixed parallel to hand rail with balusters by welding.The ends of cross bars fixed with round bar spherical end cap including welding and polishing complete. (c) Stainless steel balusters of 900mm height and 38mm diameter pipes fixed at 90cm c/c.One end welded with hand rail and other fixed with step using anchorage clamps and dash fasteners etc as required at site to fix in position complete.

Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in soft / loose soil

M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface.

M&L for providing chequered cement concrete rubber moulded coloured tiles glossy factory made of hydraulic pressed finish of 25 mm thick and size not less than 300x300 / 350 x 350mm thick set and jointed in neat cement slurry in floors with grey cement and pigments and with 15mm thick screed bed or bedding layer in CM (1:6) including dismantling of old tiles and screed bed complete all as directed

Supply, install,testing and commissioning of GENERAL DRYAND WET WASTE ELECTRIC INCINERATOR CAPACITY : 10KG/HR NUMBER OF CHAMBER : SINGLE APPLICATION : TO BURN DRY WASTE LIKE PAPER, CARDBOARD, DRY LEAVES ETC. ALSO PROVISION FOR BURNING WET WASTE WITH 30% MOISTURE ALONG WITH 70% DRY WASTE BY WEIGHT WITH DRY WASTE. ENERGY SOURCE : ELECTRIC MOC : OUTER BODY MS WITH POWDER COATING MODE : FULLY AUTOMATIC FEEDING : MANUAL SAFETY : INBUILT ELECTRICAL LOAD : 12 KW TEMPERATURE : 850 DEG TO 900 DEG C DOOR : FRONT LOAD CONTROL PANEL : POWDER COATED SMOKE CHIMNEY : More than 30 FEET HEIGHT WITH DAMPER CONTROL INSTALLATION : OUTDOOR ASH COLLECTION : TRAY OR TROLLEY FEEDING : MANUAL

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sq. mm 3.5 core complete all as directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Supply, replacement, installation, testing and commissioning of LT distribution control Panel , Kiosk type 415 Volt, 4 wire AC 50 Hz, factory made, out door type double door, both side opening, (frount and rear side) weather and vermin proof panel having degree of protection IP-54 & made out of CRCA fabricated out of sheet of 3.15 mm outer structure and 1.6mm for internal structure with duly powder coated,CPRI approved , factory made fabricated and CPRI approved, 415 volts, with locking arrangement, powder coated MS angle iron base frame with legs of size 40 X 40 X 60mm and 60cm long grounted with PCC 1:3:6 type C-1 for foundation filling with platform 100 X 75 X 15 cm above ground level floor incuding cable entries with gland for incoming and out going cable connection, aluminium bus bar 4 strip rating 500 amps, including colouring with RYB & Black including letter writen of pattern and description as directed with supply and fixing the following accessories pre-wired and connected alongwith suitable cable gland,lugs etc. all as specified and directed including taking out of unserviceable existing LT panel board and consisting of the items listed hereinafter.(Drawing of Panel and connections shall be approved by Engr-in-Charge before starting the panel work.)

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded copper conductor, 1100 volts grade, of size 4 core 6 sqmm

M/S PAVANI ENTERPRISES (BID ID -3492778)