Balance work for Construction of Boundary wall Rwall and pathway at Medical SubCentre Draman

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms, including getting out the excavated earth and disposal of surplus excavated earth as directed including leads and lifts. a) All Kind of soil

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL).

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with (including all leads and lifts carriages of material by MT/HL).

a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) with 30% boulders

b) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size).

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/HL).

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttreses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centring shuttering, finishing and reinforcement. a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL).

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all leads and lifts carriages of material by MT/HL).

Centring and shuttering including strutting, propping etc.and removal of form work for :

a) Foundation, footings, bases of columns etc. for mass concrete.

b) Columns, pillars, piers, abutments, posts and struts.

c) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Steel work welded in built up sections /framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings frames, guard bar, ladder, railings, brackets, gates and similar works.

Dumping stones in horizontal i.e. on level including cost of stones. (including all leads and lifts carriages of material by MT/HL).

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg / 10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new steel work.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Kathua for an average lead of 126.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Kathua for an average lead of 126.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Kathua for an average lead of 126.00 Km. by M.T. d) Bricks from Kathua for an av. lead of 126.00 km. by M.T. e) Stones / Boulders from Lohai nallah for an av. lead of 6.00 km. by M.T.

vishal chopatia

Mansotra