REPAIRS AND MAINT OF UTILITY SERVICES OF DG SET AND OTHER MISC WORKS AT DEPOT AREA UNDER GE PULGAON

Amount

Maintenance and servicing of DG sets of 320 KVA make:Mahindra at F sub depot once in a month including attending faults on call basis for normal repairs including replacement of defective & worn out parts by new spares such as filters, gaskets, V belts, Engine oil, rubber hoses, worm drive clamps, nut bolts and cleaning of alternator with vaccum cleaner and greasing of bearings of engine and alternator, checking of batteries, adding distilled water, checking of oil and coolant levels as directed by engineer-in Charge. ( Note : - (a) Spare parts require replacement shall be measured and paid separately under mentioned items as supply only and fixing is deemed to be included under this item. (b) Servicing to be carried out as per manufacturer instruction (c) The rates includes dismantling and taking out DG set from position and trasporting it to the workshop if required & return same location and fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts if required shall be measured and paid for separately under respective item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, screws/studs. . Note:Service/Repair work will be carried out within 05 days after intimation to contractor on telephone followed in written .Any delay beyound 05 days shall be penalised through panel recovery @ 2000 per day till the rectification /Repair start

All as per item No 01 above, but for D G Set 250 KVA, Engine make:Cummins, Location :F subdepot

All as per item No 01 above, but for D G Set 250 KVA, Engine make:Kirloskar,Location: 104 AC Shed

All as per item No 01 above, but for D G Set 250 KVA, Engine make:Mahindra,Location: 106 AC Shed

All as per item No 01 above, but for D G Set 200 KVA, Engine make:Kirloskar,Location: Cotton Market Pump House

All as per item No 01 above, but for D. G . Set 160 KVA, Engine make:Kirloskar, Location:Main gate depot

All as per item No 01 above, but for D. G . Set 160 KVA, Engine make:Greaves Crompton, Location:Millitary Hospital

All as per item No 01 above, but for D. G . Set 160 KVA, Engine make:Mahindra, Location:105 AC Shed

All as per item No 01 above, but for D. G . Set 82.5 KVA, Engine make:Kirloskar, Location:Gunjkheda pump house

All as per item No 01 above, but for D. G . Set 82.5 KVA, Engine make: Mahindra, Location:Gunjkheda pump house

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: No 1 substation

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot (Shed No 85)

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot (Shed No 87)

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot (Shed No 88)

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot (Shed No 89)

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot (Shed No 90)

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: 287 Shed, E subdepot

All as per item No 01 above, but for D. G . Set 62.5 KVA, make: Kirloskar,Location: 290 Shed, E subdepot

All as per item No 01 above, but for D. G . Set 15 KVA, make: Kirloskar,Location: Shed No 24 ASD

All as per item No 01 above, but for D. G . Set 15 KVA, make: Kirloskar,Location: Shed No 25 ASD

All as per item No 01 above, but for D. G . Set 15 KVA, make: Kirloskar,Location: Shed No 26 ASD

All as per item No 01 above, but for D. G . Set 15 KVA, make: Mahindra,Location: Near Muradgaon Gate

All as per item No 01 above, but for D. G . Set 15 KVA, make: Mahindra, Location: Near Main Fire Stn

All as per item No 01 above, but for D. G . Set 15 KVA, make: Mahindra, Location: Near 104 AC Shed

All as per item No 01 above, but for D. G . Set 15 KVA, make: Mahindra, Location: Near DSOI

All as per item No 01 above, but for D. G . Set 15 KVA, make: Mahindra, Location: Near Adm Office

All as per item No 01 above, but for D. G . Set 12.5 KVA, make: Kirloskar,Location:MAP Pump house

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location:A subdepot

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location:B subdepot

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location:C subdepot

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location:C subdepot

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location:D subdepot

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location:E subdepot

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location:Main fire station

All as per item No 01 above, but for D. G . Set 10 KVA, make: Kirloskar,Location: ISO Office

Supply only lubricating oil filter with o'ring element complete all as specified and as directed (Note :- Fixing element of these items is included under the rates quoted by the contractor for respective item of Schedule `A' item No 1.

All as per item No 36.00 above ...................but Supply only diesel filter with o'ring element

All as per item No 36.00 above ..................but Supply only air filter element

All as per item No 36.00 above ..................but Supply only by pass filter element

All as per item No 36.00 above ..................but Supply only set of hose pipe with clamps complete set

All as per item No 36.00 above ...................but Supply only oil pressure gauge

All as per item No 36.00 above …................but water pump assembly

All as per item No 36.00 above ..................but Supply only Fan & Alternator belt

All as per item No 36.00 above ..................but Supply only Fuel Supply Pipe any type

Supply only piston Assembly complete (TD piston+ Pin ) etc as standard size suitable for existing DG set 62.5KVA to 82.5 KVA, 1500 RPM, complete all as specified and as directed (Note:Fixing element of these items is included under the rates quoted by the contractor for respective items of Schedule `A' item No 01

All as per item No 45.00 above..................but Supply only cylinder liner

All as per item No 45.00 above...............but Supply only piston rings set

All as per item No 45.00 above..............but Supply only Inlet & Exhaust valves

All as per item No 45.00 above...............but Supply only valve guide

All as per item No 45.00 above.............but Supply only valve spring inner & outer

All as per item No 45.00 above.........but Supply only gasket kit complete set

All as per item No 45.00 above.........but Supply only lubricating oil filter with o'ring element

All as per item No 45.00 above...........but Supply only diesel filter with o'ring element

All as per item No 45.00 above............but Supply only air filter element

All as per item No 45.00 above.......but Supply only by pass filter element

All as per item No 45.00 above........but Supply only set of hose pipe with clamps complete set

All as per item No 45.00 above..........but Supply only oil pressure gauge

All as per item No 45.00 above.............but Supply only turbo Charger

All as per item No 45.00 above.............but Supply only water pump assembly

All as per item No 45.00 above ..................but Supply only Fan & Alternator belt

All as per item No 45.00 above..................but Supply only Fuel Supply Pipe any type

Supply only 1500 RPM of Existing make, piston assembly suitable for DG set 10 KVA to 15 KVA, complete all as specified and as directed (Note :- Fixing element of these items is included under the rates quoted by the contractor for respective items under Schedule `A' item No 01 above.

All as per item No 62.00 above ..................but Supply only cylinder liner

All as per item No 62.00 above ..................but Supply only valve spring alongwith seating washers

All as per item No 62.00 above ...................but Supply only valve guide

All as per item No 62.00 above .......................but Supply only gasket set complete

All as per item No 62.00 above .......................but Supply only piston sleeve standard

All as per item No 62.00 above .........................but Supply only piston rings set

All as per item No 62.00 above .........................but Supply only Inlet & Exhaust valves

All as per item No 62.00 above ......................but Supply only valve spring inner & outer

All as per item No 62.00 above ....................but Supply only oil sump packing kit complete

All as per item No 62.00 above .......................but Supply only lubricating oil filter with strainer o'ring element

All as per item No 62.00 above ....................but Supply only diesel filter with o'ring element

All as per item No 62.00 above ..................but Supply only set of hose pipe with clamps complete set

All as per item No 62.00 above ....................but Supply only oil pressure gauge

All as per item No 62.00 above .....................but Supply only turbo Charger

All as per item No 62.00 above ..................but Supply only Fan & Alternator belt

All as per item No 62.00 above ..................but Supply only Fuel Supply Pipe any type

All as per item No 62.00 above ....................but Supply only Crank shaft with connected accessories for 10 to 15 KVA DG Set

M&L for servicing, repair and rewinding of Armature of DG Set 10KVA to 15 KVA capacity complete all as specified and as directed.

M&L for servicing, repair and rewinding of Field of DG Set 10KVA to 15 KVA capacity complete all as specified and as directed.

M&L for servicing, repair and rewinding of Armature of DG Set 62.5 KVA to 320 KVA capacity complete all as specified and as directed.

M&L for servicing, repair and rewinding of Field of DG Set 62.5 KVA to 320 KVA capacity complete all as specified and as directed.

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gasket complete for the capacities of DG set 160 KVA to 320KVA of size complete as specified and as directed. [ Note : (i) Spares parts as per exisiting DG set required for replacement will be measured and paid as supply only under respective items hereinafter

Supply only Nozzle for DG set 160 KVA to 320KVA

Supply only FIP Element for DG set 160 KVA to 320KVA

Supply only FIP overflow valve for DG set 160 KVA to 320KVA

Supply only FIP screen filter for DG set 160 KVA to 320KVA

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gasket of DG set 62.5 to 82.5KVA complete all as specified and as directed. (Note : (i) Spares required for replacement as per exisiting DG set under respective items hereinafter will be measured and paid as supply only).

Supply only Nozzle for DG set 62.5 to 82.5KVA

Supply only FIP Element for DG set 62.5 to 82.5KVA

Supply only FIP overflow valve for DG set 62.5 to 82.5KVA

Supply only FIP screen filter for DG set 62.5 to 82.5KVA

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gusket complete for the capacities of DG set 10 to 15KVA complete as specified and as directed. Note : (i) Spares required for replacement as per exisiting DG set under respective items hereinafter will be measured and paid as supply only).

Supply only Nozzle of DG set 10 to 15KVA

Supply only FIP Element for DG set 10 to 15KVA

Supply only FIP overflow valve for DG set 10 to 15KVA

Supply only FIP screen filter of DG set 10 to 15KVA

Disconnecting and taking down old unserviceable self starter, 12Volt DC and dismantling complete for repair, servicing, cleaning, varnishing, oiling, reassembling & testing including replacement of the Following parts :- (a) Rewinding of armature – 01 No (b) Solenoid switch – 01 No. (c) Field coils – 01 No. (d) Commutator – 01 No. (e) Carbon brush – 02 Nos (f) Bendex assembly – 01 No

Disconnecting and taking down old unserviceable self starter, 24 Volt DC and dismantling complete for repair, servicing, cleaning, varnishing, oiling, reassembling & testing including replacement of the Following parts :- (a) Rewinding of armature – 01 No (b) Solenoid switch – 01 No. (c) Field coils – 01 No. (d) Commutator – 01 No. (e) Carbon brush – 02 Nos (f) Bendex assembly – 01 No

M & L for repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator , diode plate , carbon brushes for 24 volts capacity and as directed by Engineer-In- Charge :-(Note : Nuts , bolts, wahers and included in above rates and spare parts shall be measured and paid separately).

All as per item No 101 above but for 12 volts capacity

Supply & pouring of Pre-mix ready-to-use coolant suitable for radiator in 1 Ltr packing as per the requirement of time to time as directed by Engr-in-charge for various capacities of DG Set (Make : SERVO/CASTROL/PUROCOOL)

Preparation of existing surface of D.G. Set including radiator and fuel tank at various locations capacity 160 KVA to 320 KVA by scrapping out the old existing peeled off paint layer, filling the cavities with suitable filler, making the surface smooth and applying two coats of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with stencil using synthetic enameled white paint all as directed by Engineer-in-Charge.

Preparation of existing surface of D.G. Set at including radiator and fuel tank various locations capacity 62.5 KVA to 82.5 KVA by scrapping out the old existing peeled off paint layer, filling the cavities with suitable filler, making the surface smooth and applying two coats of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with using synthetic enameled white paint all as directed by Engineer-in-Charge.

Preparation of existing surface of D.G. Set including radiator anf fuel tank at various locations capacity 10 KVA to 15 KVA by scraping out the old exiting peeled out paint layer filling the cavities with suitable filler, making the surface smooth and applying two coat of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with using synthetic enameled white paint all as directed by Engineer-in-Charge.

Supply and fix in repair lead acid battery 12 Volts 180 AH for DG set with 3 years warranty,initial charging and having indicators to know the status of level of electrolyte complete. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee/warranty card as supplied by the manufacturer in addition to defects liability period.

Supply and fix in repair lead acid battery 12 Volts 150 AH for DG set with 3 years warranty, initial charging and having indicators to know the status of level of electrolyte complete.Make-Exide/standard Furukawa/AMCO/Amaron. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee/warranty card as supplied by the manufacturer in addition to defects liability period.

Supply and fix in repair lead acid battery 12 Volts 100 AH with 3 years warranty, initial charging and having indicators to know the status of level of electrolyte complete.Make-Exide/standard Furukawa/AMCO/Amaron. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee/warranty card as supplied by the manufacturer in addition to defects liability period.

S & F in repair Copper 12V battery Terminals (Positive and Negative - one set) suitable for 100 / 120/ 180 AH as per existing complete all as specified and directed by Engr-in Charge.

S & F in repair Battery leed (Positive and Negative - one set) copper not less than one metre each with suitable for 100 / 120/ 180 AH as per existing complete all as specified and directed by Engr-in Charge.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 10KVA to 15 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 62.5KVA to 82.5 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 160KVA to 320 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Supply and filling lubrication oil in 20 Ltr packing SAE-40 ( 20 W- 40 grade) of Make SERVO, IOC/HINDUSTAN PETROLEUM/BPCL/ CASTROL) as approved by GE.

Supply and filling lubrication oil in 20 Ltr packing SAE-40 ( 15 W- 40 grade) of Make SERVO, IOC/HINDUSTAN PETROLEUM/BPCL/ CASTROL) as approved by GE.

Supply and fill in batteries distilled water in 1ltr packing for topping up complete all as specified and directed.

Supply & Fill Electrolyte of suitable Sp gravity for lead acid batteries in sealed container complete all as specified and directed.

Disconnecting, and taking out carefully old unserviceable rectifier of any make and capacity,supplying and fixing new rectifier of existing make suitable for 160 KVA to 320 KVA DG set complete all as specified and directed.

All as per item No 119.00…………..but for DG Set of capacity 62.5KVA to 82.5 KVA.

All as per item No 119.00……..but for DG Set of capacity 10 KVA to 15 KVA.

Dismantling radiator assembly complete from 160KVA to 320KVA DG set carefully taking it to workshop if required and cleaning with acid/descalling solution in copper tubes & fins including repairing of botton plate & rectify the leakage by soldering welding and re-fixing the same and testing complete all as specified and directed.

All as per item No 122.00…………..but for DG Set of capacity 62.5KVA to 82.5 KVA.

All as per item No 122.00….. for DG Set of capacity 10 KVA to 15 KVA.

Taking down old unserviceable changeover switch 4 pole 100 Amp for various DG Set and supply and fix new Off Load change over with side handle complete all as secified and as directed

All as per item No 125.00 … but for 04 pole 200 Amp

All as per item No 125.00 … but for 04 pole 400 Amp

Supply and fix in repair control wiring of the DG set up to 125 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.

Supply and fix in repair control wiring of the DG set above 125 KVA up to 320 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.

M&L for tap setting of following capacities of all capacity DG sets complete all as specified and directed.

S & F in repair Power contactor 415v, 50Hz, AC suitable for D. G . Set 10 to 15 KVA Control panel / AMF Panels for the following capacities complete all as specified and directed. Make: L&T , Legrand & Schneider

All as per item No 131 above but for D. G . Set 62.5 to 82.5 KVA

All as per item No 131 above but for D. G . Set 160 to 200 KVA

All as per item No 131 above but for D. G . Set 250 to 320 KVA

Supply and Fix new Radiator assembly with all the fitting, fixtures and connected items suitable for above 125 KVA DG Set complete all as specified and as directed

Repair/Maintenance of existing microprocesor based AMF Panel with wiring, programming, replacement of any UNSV components as per site requirement for up to 125 KVA DG Set complete all as specified and as directed. labour charges includes in quoted rate. However spare parts will be measured seperately.

Repair/Maintenance of existing microprocesor based AMF Panel with wiring, programming, replacement of any UNSV components as per site requirement for above 125 KVA DG Set complete all as specified and as directed. labour charges includes in quoted rate. However spare parts will be measured seperately.

S & F in replacement DG Set power controller for capacity up to 300/200/160KVA DG Set for DG sets of Make Mahindra,Cummins,Kirloskar,Ashokleyland complete and testing all as directed.

All as per item 138.00 above but power controller for 82.5KVA to 125KVA DG Set .

All as per item 138.00 above but power controller for 10 KVA to 82.5 KVA DG Set .

M&L for servicing of RO (Reverse Osmosis) installed at various location including Regular inspection and cleaning ,checking water output quality and system performance,attending breakdown calls during the contract period, replacing PVC fitting and fixtures of existing shape and size with replacing PVC pipe of existing size and replacing unserviceable spare part complete all as specified and directed. Note : (i) Spares required for replacement as per exisiting DG set under respective items hereinafter will be measured and paid as supply only)

supply only sediment filter

Supply only cabon filter (Pre and post filter)

Supply only RO Membrance

Supply only diaphragm booster pump

Supply only UV lamp

Supply only power supply/smps Adaptor 12/24 V

M/s Dara Constructions, Pulgaon (BID ID -3368931)

M/S Maa Durga Constructions,Pulgaon (BID ID -3368320)

MAHARASHTRA ENTERPRISES (BID ID -3367538)

Paragon Electrotechnics (BID ID -3368605)

M/S JAI BHAWANI CONSTRUCTIONS (BID ID -3368338)

SHRI RANI SATI TRADERS (BID ID -3368341)

Bidder Name

Paragon Electrotechnics

SHRI RANI SATI TRADERS

MAHARASHTRA ENTERPRISES

M/s Dara Constructions, Pulgaon

M/S Maa Durga Constructions,Pulgaon

M/S JAI BHAWANI CONSTRUCTIONS

SHUBHAM SALES