C/O road from SKRN zero point to Bijli Board in km 0/0 to 1/720

Amount

Providing and laying, spreading by manual means and compacting to 75mm ( seventy five milimeters) compacted thickness stone aggregates of Grading- II, 63mm to 45mm (sixty three milimeters to fourty five milimeters) size @ 0.91cum ( point nine one cubic meters) per 10 (ten) square meters to compacted thickness of 75mm (seventy five milimeters) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 (eighty to hundred) kN static roller in stages to proper grade and camber, applying and brooming, stone screening of type B of size 11.2mm (eleven point two milimeters) @ 0.20 (point two ) cubic meters per ten square meters and binding materials @ 0.60cum ( point six cubic meter) per 10 (ten) square meters to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading II as per MORD Technical Specification Clause 405 (Four hundred five) and entire satisfaction & direction of Engineer-in-Charge, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.

Providing and laying, spreading by manual means and compacting to 75mm ( seventy five milimeters) compacted thickness stone aggregates of Grading- III, 53mm to 24.4mm (fifty three milimeters to twenty four point four milimeters) size @ 0.91cum ( point nine one cubic meters) per 10 (ten) square meters to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 (eighty to hundred) kN static roller in stages to proper grade and camber, applying and brooming, stone screening of type B of size 11.2mm (eleven point two milimeters) @ 0.18 (point one eight ) cubic meters per ten square meters to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per MORD Technical Specification Clause 405 (Four hundred five) and entire satisfaction & direction of Engineer-in-Charge, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.

Providing and applying primer coat of Low porosity with Bitumen Emulsion SS-1 (one) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 Kg. / sqm ( point eight five kilogramme per square meter) using mechanical means as per MORD Technical Specification Clause 502 ( Five hundred Two) and entire satisfaction & direction of Engineer-in-Charge, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two seven five kilogramme) per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (five zero three) and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.

Providing and laying bituminous concrete 25mm (twenty five milimetres) thick with 100-120 (one hundred to one hundred twenty) TPH batch type hot mix plant producing an average output of 75 (seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.5 (five point five ) per cent of total weight of mix, agreegate Grading II (thirteen milimetres nominal size) i.e. 13.2 - 10 mm thirty per cent, 10 - 5 mm twenty five per cent, 5 mm and below forty three per cent of volume of agreegate and filler @ 2 per cent of weight of aggregates, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five zero nine) complete in all respects and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.

Mool Chand