SPL REPAIR TO BLDGS NO T-216 AND T-212 OF 219 (I) FD WKSP (SPL) AT PRATAPUR AND PROVN OF 04 X SOAKAGE WELL AND SEWAGE LINE FOR OR TOILET AT 219 (I) FD WKSP (SPL) UNDER GE 873 EWS

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F Fe-410-W (Gde-E-250) quality A Roof trusses (framed), trussed, purlin, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by the Engr-in-charge.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed by the Engr-in-charge.

Re- fixing excpt sheeting any thickness 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed by the Engr-in-charge.

S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by the Engr-in-charge.

M&L Preparatoion of new steel surface and and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specifeid and directed by engr-in-charge

M&L for preperation of existing treatment on steel / CGI sheets of any descripton and applying one coat of synthetic enamal paint (galvanisation should be removed if required) ,complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition for Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Precast cement concrete block masonry with solid blocks , type C1 1:3:6 (using 20 mm graded aggregate) .exc 10 cm in width and set in cement mortar 1:6 complete all as specified.

M&L precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, Type C-1 1:3:6 and 20mm graded Set in Cement Mortar 1:4 complete,

Taking down cement plaster of any description on brick or stone walls, etc, incl racking out joints, hacking for key, scrubbing down with water etc, complete all as specifeid and directed by engr-in-charge.

M&L, Rendering 15mm thick on fair faces of brick work finished even and fair in CM 1:4, complete all as specifeid and directed by engr-in-charge.

M&L, Rendering 10mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:6, complete all as specifeid and directed by engr-in-charge.

M&L, for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint, complete all as specifeid and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets.

S & F GI frame work of size (605 x 605) mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre /nnintermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. GI. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete including 04mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws incl taking down & refixing all electric fittings, fixture and wiring complete all as specified

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling incl taking down & refixing all electric fittings, fixture and wiring complete all as specified

M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls incl taking down & refixing all electric fittings, fixture and wiring complete all as specified

M&L, for prepartion of old surfaces of wood or wood based materials (dusting and cleaning only) and applying one coat of synthetic enemal paint on surface of any desciption over 10 cm width or girth or not otherwise, complete all as specifeid.

M&L complete removal of existing treatment and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces, complete all as specifeid and directed

Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section complete all as specifeid and directed

M&L second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm complete all as specifeid and directed

M & L for 12mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail complete all as specifeid and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed by the Engr-in-charge.

M&L non skid ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:4 screed bed for laying floor all as specified and directed.

M&L for white glazed ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete all as specifeid and directed

M & L for Chequered cement concrete tile 20cmx20cmx25mm thick ,set and jointed over 20 mm screed bed in CM 1:4 and pointed in neat cement slurry in floor with grey pigment cement and pigment complete all as specifeid and directed.

M & L for 100 mm thick PCC 1:4:8 type D-2(40 mm graded stone agg) in sub base coarse complete

M & L for Providing, cement concrete 1:2:4 type B-1(20 mm graded stone agg) in roof kerbs or mud stops, rounded or chamfered on edges , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, kerbs , and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specifeid and directed.

Dismantling of water tanks 500 litres capacity of any description and removing to store complete all as specified and directed.

S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.

Taking down 15 mm water supply tubing of any description and connections including cleaning for re-fixing or removal to store etc complete all as specified.

Taking down 20 mm water supply tubing of any description and connections including cleaning for re fixing or removal to store etc complete all as specified.

S&F 20mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S&F16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S & F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary cessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush (pipe) complete in all respect all as specified.with integral foot rests (excuding flushing cistern and flush pipe) incl making good complete all as specified and directed

S&F in repair vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basin etc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified.

S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets, flush pipe etc complete all as specified.

S & F in repiar Vitreous China urinals size 465 x 355 x 265 mm white (minimum),bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, flush pipe, grating and Union for discharge pipe alongwith fixing of 32 mm dia coupling complete

S&F 32mm bore waste pipe for WHB complete all as specified & directed

S & F in repairs pillar taps cast copper alloy 15mm bore with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F in repairs 15mm Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed.

S & F in repairs PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L in repair PVC(SWR) floor trap plain with gratings including jointing to waste pipes with solvent cement size 75mm bore complete all as specified and directed.

S & F in repairs aluminium anodised tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified.

S&F in repair PVC (SWR) bend 110mm bore of any redius complete all as specified & directed.

S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified.

S&F CP Tubular towel rail 20mm dia Brass chromium plated.

Hacking out old broken glass (any thickness, size quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in Each pane complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames including with shutters ( without taking of shutters from the frames) exc 1.5 sqm n exc 4 sqm each ccomplete all as specifeid and directed

Supply & fixing solid PVC frame door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specifeid and directed.

Supply & fixing factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification.

S&F butt hinges 100mm,heavy weight,cold rolled mild steel complete all as specefied and as directed by engineer -in-charge.

S&F 100mm aluminium handles,cast type,anodised complete all as specefied and directed by the Engineer -in -charge.

S&F 150mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specefied and as directed by the Engineer-in-charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cable, fixing of stay etc 10 Sqm on plan and n exc 1.5 in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge.

Returing, filling in incl spreading, levelling watering and well ramming in layers n.exc 25cm width, Complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point Completed all as specified and diercted by Engineer-in-Charge.

Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge.

M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed.

Construction of soakage well exe, in hard/dense soil, foundation in PCC 1:3:6, well of honey combed and solid in M-30 concrete, including intercepting chamber, screen chamber stone masonry in CM, RCC cover slab in M-30/RR Masonry/Filling with brick bats complete of size 3.00 mtr dia and 3.0 mtr deep n etc,complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 110mm bore complete all as specified and directed by the Engr-in-charge.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 75mm bore

S&F reinforced concrete pipes 150MM, class NP2. laid and jointed complete with collars complete all as specified and directed by the Engr-in-charge.

PVC bend any radius size 110mm bore with acess door complete all as specified and directed by the Engr-in-charge.

S&F for PVC bend any radius size 75mm bore with acess door complete all as specified and directed by the Engr-in-charge.

S&F Vent cowl 110mm complete all as specified and directed by the Engr-in-charge.

Supply only brocken stone for loose filling of gauge 80mm to 150mm graded complete all as specified and directed by the Engr-in-charge.

Taking up the existing cables from trenches of any size all as specified and directed.

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Taking down of MCB DB/TPN 8 way including mcb sp and spn and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board with 3mm thick plastic laminated Hylum Sheet /gang box of suitable size and shape and Modular sunken boxes for mounting light points etc covered ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.cost of gang box /hard wood sunken box shall be deemed to be included in the rate.

(a) One light/fan/Bell point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 4 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 4 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board with 3mm thick plastic laminated Hylum Sheet /gang box of suitable size and shape and Modular sunken boxes for mounting light points etc covered ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.cost of gang box /hard wood sunken box shall be deemed to be included in the rate.

S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 3 pin / 5 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20 W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. Make: HAVELLS /wipro/CG/Phillips or equivalent .

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.Make: HAVELLS /wipro/CG/Phillips or equivalent .

S&F ding dong bell, 230 volts AC complete all as specified and directed.HAVELLS /wipro/CG/Phillips or equivalent Make: HAVELLS /wipro/CG/Phillips or equivalent .

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make: HAVELLS /wipro/CG/Phillips or equivalent .

S&F 3 Watt spot light, focus light , colour- warm white spot light cellling lamp.Make:HAVELLS /wipro/CG/Phillips or equivalent .

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. Make :Legrand/Schneider/ABB.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make :Legrand/Schneider/ABB.

Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. Make :Legrand/Schneider/ABB.

Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make :HAVELLS /CG/Phillips.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. Make :HAVELLS /CG/Phillips.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm Make : Bajaj/Crompton/Havells all as specified and directed.

Supply, laying, fixing, passing through pipe or laid in trenches and testing underground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 16 sqmm 4 core complete all as specified and directed.

Deduct Schedule of Credit of Rs (-) 1,08,145/- (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S MOHD KARIM (BID ID -3398876)

M/S HONY CAPT RIGZIN SAMPHEL (BID ID -3399008)