Renovation of Regional Director Cabin

Carefully dismantling of false ceiling including disposal of unserviceable material and including stacking of serviceable material and disposal of unserviceable/debris material from the Bank's premises etc. all complete as directedby the Engineer-in-charge.

Carefully dismantling of expanded metal of false celing support system or I.R.C. fabrics with necessary battens and beading of roofs and walls including including stacking of serviceable material and disposal of unserviceable/debris material from the Bank's premises etc. all complete as directedby the Engineer-in-charge.

Carefully dismantling and removal of of carpet flooring including stacking of serviceable material and disposal of unserviceable/debris material from the Bank's premises etc. all complete as directedby the Engineer-in-charge.

Carefully dismantling wooden panelling in lining of walls and partitions, excluding supporting members but including stacking of serviceable material etc. all complete as directedby the Engineer-in-charge.

Carefully dismantling of concrete/ brickwork/ kota stone raised flooring upto floor finish level. The rate shall also include repairing and finish of floor levelled upto near by existing floor. The rate shall also include carefully removal and reinstallation of stainless steel railings and protecting nearby glass wall,floors, column and other structures etc. with suitable measures and protecting prop or temporary arrangements. The rates shall also include stacking of serviceable material and disposal of unserviceable/debris material from the Bank's premises etc. all complete as directedby the Engineer-in-charge. Approximate particulars of Offset structures- Height-0.18mtr, Length-7 mtr, Width-1.03 mtr

Providing and fixing black powder coated Aluminium skeleton frame work, formed by using square/rectangular tabular sections of size 63.50X 38.10X 2.00 mm (unit weight = 1.054 kg/meter, Jindal make Section No. - 14013) mm of approved make, for verticals and horizontals spaced not more than 600 mm centre to centre i.e. making c/c grid of 600 mm X 600mm, fixed to RCC roof & floor with the heavy duty aluminium cleats of size 38.1x25.4x2.36 mm (Unit Weight= 0.39 Kg/mtr. Section no.16749 ) (alternate members shall be extended upto ceiling and fixed firmly with angle cleat arrangement). Extra horizontal member shall be provided at raceway/skirting level. All the vertical/ horizontal members shall be core cut properly of directed sizes and numbers at the junction of raceway or any other locations directed by Bank's engineers for crossing electrical/data cabling/conduits etc.}

Gypsum Board False Ceiling on existing frame: Providing and fixing suspended type 12.5 mm thick tapered edge gypsum moisture resistant board false ceiling system, coving and for column capitals in different levels, firmly fixed on existing metal frame comprised of existing ceiling channels all complete as directed by Bank's Engineer. Rate shall be inclusive of removing, shifting, welding, repairing, re-fixing etc. work of the alignment of existing hangers, channels, bolts, fasteners, etc. required for the false ceiling. Rate shall also include providing and fixing new framing sections in 10-%15% of the ceiling area (Gypserra Metal Framing System of M/s Gyproc or approved equivalent) for replacing the damaged/disturbed framework and for making Coving (approx. 10-15% of the total frame may be considered/damaged during dismantling and making coving). The nails/screws of the existing frame which are attached to the gypsum board are to be removed by manual means without damaging the frame and keeping the alignment of the frame. Work includes jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per the specifications and direction of the Engineer in Charge but excluding the cost of painting.Joint of gypsum board to be taped 3 times and sealed with jointed compound. Cost includes providing and fixing of coves, patta, etc. Clear finished surface of the false ceiling and vertical boards will be measured for payment.

Gypsum Board False Ceiling with new frame: Providing and fixing 12.5 mm thick tapered edge gypsum moisture resistant board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per the specifications and direction of the Engineer in Charge but excluding the cost of painting.

Providing and fixing 12 mm thick plywood panelling with teak wood veneer on existing new or old partition, wall or ceiling with back framing as per the detail drawings. The back framing (framing and veneer item shall be paid separately) shall be covered with 8.0 mm thick commercial MR Grade plywood fixed with suitable size of nails/screws and finished with 4.0 mm thick teak veneer of the desired finish and design with panel size as required and with 3mm- 5mm width grooves as per the design as as directed by the Engineer-in-charge. The teak veneer shall be carefully pasted with white adhesive synthetic adhesive over plywood in desired design and drawing. Plywood shall conforming to IS 710: 2024