PROVN OF VIEW CUTTERS AND CERTAIN MINOR WORK AT PATIALA MIL STN

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, in soft/loose soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed

Removing excavated material(Soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as spd and as directed

M&L for Cement Concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S & F mild rolled steel posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc,flat iron fillets (for securing wire mesh etc) including all necessary drilling,bolting or riveting,etc and similar work conforming to Fe-290 Gde E-165 cleats etc complete all as specified and as directed by Engr in charge.

S&F Flat iron fillets for securing wire mesh etc including all necessary drilling,bolting or riveting etc and similar work confirming to Fe290 Gde E-165 all as specified and directed.

M&L for two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of new surfaces complete all as specified & directed.

M&L for Fibre sheet of 3mm thickness of approved colour/shade for chajjas/cladding/ view cutter and the like works etc. fixed to frame work of MS/aluminium/hollow sections of any size, description including fixing with self tapping screws, washers etc complete all as specified & directed.

M&L for Reinforced concrete pipes of 200 mmdia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) including concrete bed type D-2 1:4:8 to drain pipe 200 mm bore including packing under and haunching against the sides of pipes complete all as specified and directed by Engr-in-charge.

Construction of septic tank for 20 users (LLDP) with excavation in any type of soil , foundation PCC 1:2:4 ,brick work in CM (1:4) , RCC slab covers including RCC precast manhole cover having 6 mm thick MS plate embedded all around fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete all as directed and as shown in drawings.

Construction of Soakage wells of size 1.80 m dia and X 4.5 m deep with excavation in any type of soil , foundation in PCC 1:4:8 ,walls in honey combed brick masonary in CM(1:4) with top ring of M-25 RCC including intercepting chamber and screen chamber made of brick masonary in CM (1:4), RCC cover slab in RCC M25 , SFRC cover interconnecting pipes of RCC /DWC , filled with brick bats complete all as directed and as shown in drawings.

Cutting into existing manholes for 200 mm bore connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 typeB-l smooth finished, and reforming benching as required as directed by Engr-in-Charge.

Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5 deep in soft/loose soil for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed

M&L for brick work with sub Class 'B' brick straight or curved on plan exceeding 6m mean radius using old size brick built in CM (1:4) complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in bed block, benching or coping including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L 15mm thick plastering on fair faces of brick work or concrete surfaces in CM 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L Providing precast reinforced cement concrete (1:2:4) type B-1(using 20mm graded stone agg ) as in manhole cover slab complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for colouns, hooling ends and binding with and including, mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

ANIL KUMAR AND CO (BID ID -3209113)

M/S Mukesh Kumar Gupta (BID ID -3209025)

m/s panchmukhi builders (BID ID -3208033)

Arneja Builders (BID ID -3205360)

Buttar Construction Co. (BID ID -3209453)