Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹83.6 L
EMD Value
₹1.7 L
Closing Date
18 Jul 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
POWER/BCT
22 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure - VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Page-14, Para 10.2, Part-I of GCC April 2022). Attached Performa as per Annexure VIB - in Tender Document).
Electrical Contractor License: The tendering firm must have valid Electrical Contractor's License issued by any State Government in their own name or in the name of the firm, as per IE Rule 1956 clause No. 45 or as amended from time to time. A copy of the license shall be uploaded along with the tender offer failing which the offer shall be summarily rejected. The license must be valid as on the date of opening of the tender. If the license has been expired as on the date of opening of tender, the license renewal documents must be uploaded along with the copy of the old license. The Contractor shall possess valid License throughout the currency of the contract. The contractor shall ensure timely renewal of the license.
26 conditions · 7 needing a document upload
1) The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as specified in the tender, under the conditions of tender. 2) The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. (3) In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids(ACS-2 Dated 13.12.2022) iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non-submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the officer and address as mentioned in the tender document. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder. (As per Clause 5, Page -4,5,6 Part I GCC April 2022 with ACS-2 Dated 13.12.2022)
Subject to exemptions provided under para 5(1) (a) of Part-1 (ITT) of GCC April 2022, the tender must be accompanied by a Bid Security as mentioned in tender documents, failing which the tender shall be summarily rejected. (Clause 6 (a) Annex -I, Page-11, Part-I of GCC April 2022)
Note: i) Any firm recognized by Department of Industrial Policy and Promotion (DIPP as 'Startups' shall be exempted from payment of Bid Security subject to submission of Registration Certificate issued by appropriate authority. ii) Labour Cooperative Societies shall submit only 50% of Bid Security shall also additionally submit Registration Certificate. (As per Clause 5 , Page-5, Part-I of GCC April 2022)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer Credentials: Documents testifying tenderer previous experience and financial status should be produced along with the tender. (Clause 11, Page-16-17, Part-I of GCC April 2022)
(i) Certificates and testimonials regarding contracting experience for the type of job for which tender is invited with list of works carried out in the past.
(ii) Audited Balance Sheet duly certified by the Chartered Accountant regarding contractual payments received in the past.
(iii) The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
(iv) A copy of certificate stating that they are not liable to be disqualified and all their statements / documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested / digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
(v) The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under.
(vi) (a) In case of any information submitted by tenderer is found to be false, forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Bid Security besides banning of business for a period of upto two years. (b) In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto two years.
Non-compliance with any of the conditions set forth therein above is liable to result in the tender being rejected.
This tender complies with Public Procurement Policy (Make in India) Order, 2017 - Revision dated 16/09/2020, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2020/RS(G)/779/2/Pt.1 dated 25/09/2020 and amendments / revisions thereof." The full details of the order can be seen at http://dipp.nic.in/whats-new/publicprocurement- preference- make-india-order- 2017. (Authority Railway Boards L. No. 2020/RS(G)/779/2/Pt.1 dated 25-09- 2020)
Contractor is to abide by the provisions of various labour laws in terms of above clause 54, 55, 55-A and 55-B of the Standard General Conditions of Contract. In order to ensure the same, an application has been developed and hosted on website ''www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/ company etc. and upload requisite details of labour and their payment in this portal. These details shall be available in public domain. (Page- 86-89, Part-II of GCC-April 2022)
Nardana Yard Remodeling - Electrical (Power) work in connection with Dhule - Nardana new line project.
EL-81-908-WA-10-R
EL-81-908-WA-10-R
Open
Works - General
9 Months
Mumbai, Maharashtra
₹0
₹1.7 L
18 Jul 2025
23 Jun 2025
161 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 83,58,895 | ||
| — | 100.00 | — | — | ||
| Supply of material and providing light/fan point concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. for phase, neutral & earth wire and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I. | — | — | — | 52,600 | |
| — | 1000.00 | — | — | ||
| Supply of material and providing main/ submain concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 2.5 sq.mm. for phase, neutral & earth wire, as per specifications in Annexure II. | — | — | — | 1,11,000 | |
| — | 2000.00 | — | — | ||
| Supply of material and providing main/ submain concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm. for phase, neutral & earth wire, as per specifications in Annexure II. | — | — | — | 3,10,000 | |
| — | 20.00 | — | — | ||
| Supply and fixing of modular concealed mounting box of six module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. | — | — | — | 2,880 | |
| — | 20.00 | — | — | ||
| Supply and fixing of modular concealed mounting box of eight module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. | — | — | — | 3,580 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing & commissioning of modular multi socket 5 pin of 6A or 10A capacity with 10A one way modular switch with neon indicator, as per specifications in Annexure IV. | — | — | — | 3,060 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing & commissioning of modular power socket 3 pin twin heavy duty of 6/16A or 10/20 A capacity with 20A one way modular switch with neon indicator, as per specifications in Annexure V. | — | — | — | 5,100 | |
| — | 3.00 | — | — | ||
| Supply, fixing & commissioning of DP MCB 6-40A, in enclosure made of non metallic polycarbonate thermoplastic material, IP 65 weatherproof, as per specifications in Annexure VI. | — | — | — | 3,096 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing & commissioning of MCB DB three phase with RCCB, in m.s. enclosure, out door type, I/C- FP MCB of 63A - 1No. & FP RCCB of 63Amp - 1No and O/G: SP MCB of 10-32 Amp - 12Nos, as per specifications in Annexure VII. | — | — | — | 7,750 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing & commissioning of 25A 4P RCCB with 30mA sensitivity, in m.s. enclosure, as per specifications in Annexure VIII. | — | — | — | 3,656 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing & commissioning of electric insect killer / fly catcher machine, of size 18"-24" with 2 nos. ultra violet UV tube lights of 15-20W each & HT current electrified grid system, as per specifications in Annexure IX. | — | — | — | 3,744 | |
| — | 50.00 | — | — | ||
| Supply of energy efficient BEE 5 star rated BLDC ceiling fan 1200mm (48") sweep, with down rod and standard accessories, as per specifications in Annexure X. (Minimum Warrantee - 2 years) | — | — | — | 1,14,700 | |
| — | 50.00 | — | — | ||
| Fabrication, supply and fixing of MS clamps with MS hook made with MS rod of 12mm dia., as per site requirement for installation of ceiling fans in covershed. The clamp shall be made from 30mm x 6mm MS flat in suitable shape, properly galvanized. The firm shall check the site for exact size & shape of clamps as per platform steel structure before fabrication and supply. | — | — | — | 9,550 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing and commissioning of exhuast fan 9" of plastic blade, as per specification given in Annexure XI. | — | — | — | 19,360 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing & commissioning of super energy efficient BLDC motor industrial exhaust fan of size 300mm (12") sweep and standard accessories, as per specifications in Annexure XII. (Minimum Warrantee - 2 years) | — | — | — | 1,11,360 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of air circulator wall mounting type fans of size 30"/750mm sweep complete with necessary fixing arrangement, as per specifications in Annexure XIII. | — | — | — | 1,01,320 | |
| — | 200.00 | — | — | ||
| Supply, fixing, testing & commissioning of outdoor type LED luminaires 40W (maximum), 4 ft long, whether proof having IP 65/66 protection, replaceable driver having internal surge protection of 4 KV, System efficacy greater than or equal to 110 lm/W, Luminaires must be capable of delivering minimum 4000 lumens, luminaires complete with all accessories and other specifications as per Annexure XIV. (Minimum Warrantee - 5 years) | — | — | — | 7,73,800 | |
| — | 100.00 | — | — | ||
| Supply, fixing, testing & commissioning of LED street light lumaires 60W maximum, whether proof having IP 65/66 protection, System efficacy greater than or equal to 120 lm/W, Luminaires must be capable of delivering minimum 7000 lumens, luminaries complete with all accessories and other specifications as per Annexure XIV. (Minimum Warrantee - 5 years) | — | — | — | 2,37,300 | |
| — | 100.00 | — | — | ||
| Supply, fixing, testing & commissioning of LED street light lumaires 45W (maximum 48W including driver), whether proof having IP 65/66 protection, having inbuilt auto dimming driver and sensor, System efficacy greater than or equal to 120 lm/W, Luminaires must be capable of delivering minimum 5400 lumens, luminaries complete with all accessories and other specifications as per Annexure XIV. (Minimum Warrantee - 5 years) | — | — | — | 3,30,300 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing & commissioning of LED medium bay luminaires, 50W maximum, weather proof having IP 65 protection, System efficacy greater than or equal to 120 lm/W, Luminaires must be capable of delivering minimum 6000 lumens, luminaires complete with all accessories and other specifications as per Annexure XIV. (Minimum Warrantee - 5 years) | — | — | — | 1,06,600 | |
| — | 5.00 | — | — | ||
| Supply, fixing, testing & commissioning of LED highbay luminaires, 102W (105 maximum), weather proof having IP 65 protection, System efficacy greater than or equal to 125 lm/W, Luminaires must be capable of delivering minimum 12500 lumens, luminaires complete with all accessories and other specifications as per Annexure XIV. (Minimum Warrantee - 5 years) | — | — | — | 40,435 | |
| — | 5.00 | — | — | ||
| Supply, fixing, testing & commissioning of LED flood light luminaire, 98W (maximum 100W including driver), whether proof having IP 66 protection, System efficacy greater than or equal to 120 lm/W, Luminaires must be capable of delivering minimum 11700 lumens, luminaires complete with all accessories and other specifications as per Annexure XIV. (Minimum Warrantee - 5 years) | — | — | — | 49,330 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing & commissioning of LED flood light luminaire, 200W (maximum 220W including driver), whether proof having IP 66 protection, System efficacy greater than or equal to 130 lm/W, Luminaires must be capable of delivering minimum 26000 lumens, luminaires complete with all accessories and other specifications as per Annexure XIV. (Minimum Warrantee - 5 years) | — | — | — | 1,40,530 | |
| — | 330.00 | — | — | ||
| Survey, design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. Details as per specifications in Annexure XV. | — | — | — | 7,21,380 | |
| — | 330.00 | — | — | ||
| Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 Micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. Details as per corresponding specifications in Annexure XV. | — | — | — | 71,610 | |
| — | 20.00 | — | — | ||
| Fabrication, supply, fixing, testing and commissioning of LED station name board in three languages with the letters of size 450mm height and the width should be proportionate to the height. Width of the leg of each letter minimum 70mm and depth of the letter minimum 65mm. One module of 3 LEDs should be taken by every 9 sq inch, complete with ray roll plug socket with MCB in water proof MS box. Proposed rate is for each letter. Details as per corresponding specifications in Annexure XVI. | — | — | — | 57,440 | |
| — | 2.00 | — | — | ||
| Supply of True On-Line Double Conversion UPS of capacity 2 KVA, single phase input and single phase output +/- 1%, with galvanic isolation transformer, fully microprocessor controlled, SPWM based IGBT buck charger/ converter/ inverter, complete with all accessories. Details as per Annexure XVII. (60 Months Warranty) | — | — | — | 93,220 | |
| — | 16.00 | — | — | ||
| Supply of battery- Sealed Maintenance Free SMF Lead Acid VRLA battery (with tubular positive plates) 12V, 42AH for backup time of minimum 120 min/2 hours at rated full load, Battery rack, interlocking cables (8 units), as per Annexure XVIII. (24 Months Warranty) | — | — | — | 75,520 | |
| — | 2.00 | — | — | ||
| Supply of battery rack, battery positive & negative Nyman interlink copper cables, isolators & other accessories for the battery set. (complete set), as per Annexure XIX. | — | — | — | 20,060 | |
| — | 2.00 | — | — | ||
| Supply of Maintenance Bypass panel for Master/ Slave & Slave-l Power Source and internal connections for the UPS. . ML DPl for connecting lnput of UPS1 . ML DP2 for connecting lnput of UPS2 . ML Bypass DP for connection of bypass line. | — | — | — | 48,380 | |
| — | 2.00 | — | — | ||
| Loading, transportation and unloading of material at site, installation, testing and commissioning of UPS set complete with battery, positive & negative interlink cables, isolators, Maintenance Bypass panel & battery rack etc., as per Annexure XX. | — | — | — | 27,140 | |
| — | 2.00 | — | — | ||
| Supply of Thyristor SCR based hot standby switch with triple lnput (Master/ Slavel/ Slave-l) & Single output (P+N+G), of capacity 6 KVA, 20 Amp, Single phase, as per specifications in Annexure XXI. (24 Months Warranty). | — | — | — | 57,820 | |
| — | 2.00 | — | — | ||
| Fabrication, supply, fixing, testing & commissioning of On Load Manual Changeover Switch 125A, as per specifications in Annexure XXII | — | — | — | 32,262 | |
| — | 1.00 | — | — | ||
| Design, fabrication, supply, erection, testing and commissioning of outdoor type 3 Phase LT distribution panel board comprising of the following switchgears/ accessories: Incoming - MCCB, 4-pole, 125 Amp, with thermal-magnetic release range 100 - 125 Amp, having 35 KA breaking capacity = 1 No. Outgoing - MCCB 4-pole, 63 Amp, with thermal magnetic release range 50 - 63 Amp, having 35 KA breaking capacity = 2 Nos., MCB TPN 32 Amp having 10 KA breaking capacity = 10 nos. MCB DP 10 Amp having 10 KA breaking capacity = 4 nos. Panel shall be complete with meters & other accessories, as per specifications in Annexure XXIII. | — | — | — | 96,880 | |
| — | 3.00 | — | — | ||
| Provision of new fire extinguishers, 6 KG DCP type, as per specifications in Annexure XXIV. | — | — | — | 3,981 | |
| — | 2.00 | — | — | ||
| Provision of new fire extinguishers, 4.5 KG CO2 type, as per specifications in Annexure XXV. | — | — | — | 5,096 | |
| — | 3000.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 16 sq.mm.x 4 core, as per specifications in Annexure XXVI. | — | — | — | 3,24,000 | |
| — | 2000.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 25 sq.mm.x 4 core, as per specifications in Annexure XXVI. | — | — | — | 2,88,000 | |
| — | 3000.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 50 sq.mm.x 4 core, as per specifications in Annexure XXVI. | — | — | — | 7,62,000 | |
| — | 1000.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 70 sq.mm.x 4 core, as per specifications in Annexure XXVI. | — | — | — | 3,31,000 | |
| — | 50.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded copper conductor cable of size 6 mm² x 4 core, as per specifications in Annexure XXVI. | — | — | — | 11,100 | |
| — | 3.00 | — | — | ||
| Supply, fixing, testing & commissioning of cable jointing kit for aluminium conductor XLPE insulated PVC sheathed, armoured cable of size 16 sq.mm. 4 core, as per specifications in Annexure XXVII. | — | — | — | 8,769 | |
| — | 3.00 | — | — | ||
| Supply, fixing, testing & commissioning of cable jointing kit for aluminium conductor XLPE insulated PVC sheathed, armoured cable of size 25/35 sq.mm. 4 core, as per specifications in Annexure XXVII. | — | — | — | 12,039 | |
| — | 3.00 | — | — | ||
| Supply, fixing, testing & commissioning of cable jointing kit for aluminium conductor XLPE insulated PVC sheathed, armoured cable of size 50 sq.mm. 4 core, as per specifications in Annexure XXVII. | — | — | — | 25,140 | |
| — | 100.00 | — | — | ||
| Supply, fixing, testing & commissioning of aluminium lugs of size 50 sq.mm. for cable termination, as per specifications in Annexure XXVIII. | — | — | — | 1,500 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing & commissioning of aluminium lugs of size 70 sq.mm. for cable termination, as per specifications in Annexure XXVIII. | — | — | — | 1,150 | |
| — | 10.00 | — | — | ||
| Supply and fixing of flange type cable glands made out of brass castings, outdoor type suitable for armoured cables, gland size upto 25 mm dia., as per specifications in Annexure XXIX. | — | — | — | 1,810 | |
| — | 10.00 | — | — | ||
| Supply and fixing of flange type cable glands made of out of brass castings, outdoor type suitable for armoured cables, gland size above 25 mm and upto 38 mm dia., as per specifications in Annexure XXIX. | — | — | — | 3,340 | |
| — | 10.00 | — | — | ||
| Supply and fixing of flange type cable glands made out of brass castings, outdoor type suitable for armoured cables, gland size above 38 mm and upto 52 mm dia., as per specifications in Annexure XXIX. | — | — | — | 4,540 | |
| — | 10.00 | — | — | ||
| Supply and fixing of flange type cable glands made out of brass castings, outdoor type suitable for armoured cables, gland size above 52 mm and upto 67 mm dia., as per specifications in Annexure XXIX. | — | — | — | 5,960 | |
| — | 10.00 | — | — | ||
| Supply and fixing of flange type cable glands made out of brass castings, outdoor type suitable for armoured cables, gland size above 67 mm and upto 76 mm dia., as per specifications in Annexure XXIX. | — | — | — | 8,950 | |
| — | 1000.00 | — | — | ||
| Excavation of the cable trench in normal soil under rail/ road and refilling back the excavated earth, restoring /repairing of flooring after lying of cable, as per specifications in Annexure XXX. | — | — | — | 92,000 | |
| — | 2000.00 | — | — | ||
| Excavation of the cable trench in hard soil under rail/ road/rocky soil / platforms (stone/RCC/Rock) and refilling back the excavated earth, recasting of flooring after lying of cable, as per specifications in Annexure XXXI. | — | — | — | 12,48,000 | |
| — | 500.00 | — | — | ||
| Supply and erection of RCC hume pipe half round of size 150mm (6") dia x 1 mtr long, as per specifications in Annexure XXXII. | — | — | — | 97,000 | |
| — | 100.00 | — | — | ||
| Supply & fixing of heavy duty pipe, made of glass fiber reinforced polyester moulding composite material, Size 150mm dia, 4mm thick, for cable protection, as per specifications in Annexure XXXIII. | — | — | — | 1,19,200 | |
| — | 60.00 | — | — | ||
| Supply of material & saddling to the cables with GI saddles, as per specifications in Annexure XXXIV. | — | — | — | 2,880 | |
| — | 50.00 | — | — | ||
| Supply of material, fabrication of clamps of size minimum 25x3 mm & GI screw of size minimum 2 inch, and clamping of cables as per specifications in Annexure XXXV. | — | — | — | 3,500 | |
| — | 200.00 | — | — | ||
| Supply of material and providing PVC insulated & sheathed, LSHF / ZHFR flexible multi strand copper cable connections for power supply to lights/ fans, cable size 1.0 sq.mm., 3 core, upto 3 meter length, in PVC conduit pipe for laying & protection including cable ties for fastening, connection of light/ fans, as per specifications in Annexure XXXVI. | — | — | — | 49,400 | |
| — | 100.00 | — | — | ||
| Supply, fixing & commissioning of cable looping junction box, weatherproof for single phase, made of glass fiber reinforced polyester GRP moulding composite material, of minimum size 200mm x 140mm x 95mm (inside dimensions) with Kitkat fuse, as per specifications in Annexure XXXVII. | — | — | — | 46,200 | |
| — | 50.00 | — | — | ||
| Supply, fixing and commissioning of cable looping Junction box, weatherproof for 3 phase, 4 wire, made of glass fiber reinforced polyester moulding composite material, of minimum size 250mm x 200mm x 105mm (inside dimensions) with Kitkat fuse, as per specifications in Annexure XXXVIII. | — | — | — | 40,800 | |
| — | 30.00 | — | — | ||
| Design, fabrication, transportation, supply & erection of 4 meter length hot dip galvanized iron sheet street light octagonal pole with foundation type base plate & foundation bolts, excluding foundation (Approximate Dimensions for pole: Top Diameter greater than or equal to 70 mm, Bottom Diameter 130 mm, Section Length- 5000 mm, Thickness-3 mm, Foundation Type Base Plate (200X200X12 mm), Foundation Bolts (M16 X 600MM 4Nos).with two arm brackets min. 1000 mm long, suitable for LED street light fitting, as per specifications in Annexure XXXIX. | — | — | — | 3,46,650 | |
| — | 30.00 | — | — | ||
| Design, supply of material & casting of RCC foundation with 1:3:6 concrete suitable for 4 meter high GI street light octagonal pole, as per specifications in Annexure XL. | — | — | — | 60,450 | |
| — | 30.00 | — | — | ||
| Supply of material & providing earthing with 'B' class G I pipe 3M long x 50mm dia, 3.2mm thick ISI marked, with earthing chamber & top cover, as per specifications in Annexure XLI. | — | — | — | 98,310 | |
| — | 5.00 | — | — | ||
| Supply of material & installation of maintenance free earth electrode of length 3 meter, including earth enhancement material for earthing for each electrode & other accessories as per Drg. No. SDO/ RDSO/ E&B/001 and RDSO Spec No. RDSO/SPN/197 /2008, as per Annexure XLII. | — | — | — | 55,955 | |
| — | 5.00 | — | — | ||
| Supply and fixing GI wire of size 4mm dia. / 8 SWG, as per specifications in Annexure XLIII. | — | — | — | 280 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing & commissioning of G.I. strip 25mm x 6mm for earthing, including cutting, bending, welding, excavation etc., as per specifications in Annexure XLIV. | — | — | — | 2,080 | |
| — | 2.00 | — | — | ||
| Supply and fixing G.I. strip hot dip galvanized of size 50mm x 6mm for main earthing terminal MET with total length including all bends etc. minimum 2 ft.. Scope also includes cutting, bending, welding, excavation etc. Specifications in Annexure XLV. | — | — | — | 1,344 | |
| — | 100.00 | — | — | ||
| Supply, laying, testing, fixing and commissioning of PVC insulated & PVC sheathed, multi-stranded, 1.1 KV grade, copper conductor cable of size 10 sq.mm. single core FRLS, in flexible / rigid PVC conduit, complete with clamping of the cables, and lugs at each connection, as per specifications in Annexure XLVI. | — | — | — | 15,900 | |
| — | 200.00 | — | — | ||
| Supply and installation of GI perforated cable tray of size 300mm width x 50mm depth x 1.6mm thick, including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc. as required, as per specifications in Annexure XLVII. | — | — | — | 1,19,800 | |
| — | 50.00 | — | — | ||
| Supply & fixing of PVC casing & capping of size 50mm x 50mm with all accessories for covering of cables/ wires etc., as per specifications in Annexure XLVIII. | — | — | — | 10,450 | |
| — | 50.00 | — | — | ||
| Supply & fixing of PVC casing & capping of size 50mm x 100mm with all accessories for covering of cables/ wires etc., as per specifications in Annexure XLVIII. | — | — | — | 37,050 | |
| — | 1.00 | — | — | ||
| Supply of aluminum ladder of size 6 feet height (when open), double sided, made from aluminum section of minimum size - 66 x 31 x 3.15 mm thickness, 5 steps of 1 ft. width min., two way climbing, Top platform min. size 10" x 14", complete with anti-skid solid rubber at bottom, as per specifications in Annexure XLIX. | — | — | — | 10,592 | |
| — | 1.00 | — | — | ||
| Supply of aluminum ladder of size 8 feet height (when open), double sided, made from aluminum section of minimum size - 66 x 31 x 3.15 mm thickness, 7 steps of 1 ft. width min., two way climbing, Top platform min. size 10" x 14", complete with anti-skid solid rubber at bottom, as per specifications in Annexure L. | — | — | — | 14,273 | |
| — | 1.00 | — | — | ||
| Supply of aluminum folding ladder of size 10 feet height (when open), double sided, made from aluminum section of minimum size - 66 x 31 x 3.15 mm thickness, 9 steps of 1 ft. width min., two way climbing, Top platform min. size 12" x 16", complete with anti-skid solid rubber at bottom, as per specifications in Annexure LI. | — | — | — | 17,663 | |
| — | 1.00 | — | — | ||
| Supply of aluminum folding type Self Supported Extension ladder of size 20 feet height (when open/ extended), made from aluminum alloy section of minimum size - 66 x 31 x 3.15 mm thickness, complete with pipe steps, stoppers to lock ladder, nylon rope and pulley arrangements for extension, anti-skid solid rubber at bottom, as per specifications in Annexure LII. | — | — | — | 38,000 | |
| — | 1.00 | — | — | ||
| Supply of hammer type drill machine, heavy duty, 230V, 50Hzs, complete with auxiliary handle, accessory set, Accepted make - Bosch GBH 220 SDS Plus Professional Rotary Hammer or similar of Stanley / Dewalt / Hitachi Rotary Hammer Drill. | — | — | — | 6,453 | |
| — | 1.00 | — | — | ||
| Supply of Digital Earth resistance meter with Testing Kit. Display : 3½ or 4 Digit LCD display 2000 count, Data hold facility, Earth resistance measurement range from 0 - 01 Ohm to 2000 ohm, Power Source - Battery Powered, Maximum Operating Voltage - 30V, Measurement Type - Ohmmeter. Complete with accessories like Test leads/ set of 3 spikes (stake) and connecting wires, carrying case, battery, instructions manual etc. KM 1520 model of Kusum MECO make or similar of FLUKE, RISHABH, MEGGER, MITRAVI. | — | — | — | 15,930 | |
| — | 3.00 | — | — | ||
| Supply of Digital Clamp Meter with following specifications: 3 ½ digits, LCD display, 2000 counts with automatic sign & function, 5 functions, Battery check function, Low battery indication, Overload protection, Audible continuity, Average Sensing, Over Range Indication, Diode Test, AC Current- 0.01 Amp, AC Voltage- 0.1V -750V DC Voltage- 1.0MV-1000V, Resistance- 0.1 Ohms-2000K Ohms, Power supply- Single standard 9V Battery. Make- KUSUM-MECO KM 2700, FLUKE 362, RISHABH RISH 1000 AAC, MEGGER-DCM-310/EN, MITRAVI-DT-4250. | — | — | — | 13,641 | |
| — | 1.00 | — | — | ||
| Supply of digital insulation resistance tester/ Ohmmeter with test voltages up to 1000V, Battery operated, Power ON or OFF switch for continuous measurement; Output high voltage LED indicator, complete with accessories like Test leads, carrying case, battery, instructions manual etc. RISH INSU 10, Multicolour model of Rishabh make or similar of FLUKE, Kusum MECO, MEGGER, MITRAVI. | — | — | — | 5,456 | |
| — | 3.00 | — | — | ||
| Supply of Self contained storage type drinking water cooler with Eco Friendly refrigerant (Non CFC/ R-134a), energy efficient compressor, full stainless steel tank, Cooling capacity: 150 Liters/Hour, Storage capacity: 150 Liters, Maximum energy consumption: 1550 Watt, Confirming to IS No. 1475 (Part-1) 2001 or latest. Make: Blue Star/ Usha/ Sidwal/ Shriram/ Voltas/ Hitachi/ Carrier. | — | — | — | 1,48,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .