SPECIAL REPAIRS TO CERTAIN BLDGS

Amount

Demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding removal servicable tiles from site and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor.complete all as specified and directed

Taking down cement plaster on brick wall including raking out,joints hacking for key's scrubbing down with water complete all as specified and directed

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed

M&L for hardcore of gauge not exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 40mm thick uniformly levelled surface of stone dust cushioning complete all as specified and directed.

M&L for non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm as in floors laid over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and directed

All as per Srl item No. 13 above but in dado / skirting but laid over and including 10mm thick rendering in CM (1:4) -ditto-

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles of size 600mmx 300mm x 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match colour of tiles laid over and including 15 mm thick rendering in CM (1:4) complete all as specified and directed .

M&L for moorum/red bajri filling in floors or pavings laid in layers not exc 15cm thick spread levelled and rammed including watering complete all as specified and directed

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in , coping, benching and other similar work with weathering slightly rounded edges and throating with and including all necessary form work complete all as specified and directed

M&L for PCC 1:4:8, Type D2 (using 40mm graded stone aggregates), 100mm thick, as in sub base complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) including finished even and smooth with using extra cement as in plinth protection including necessary form work to edges including filling of joints with bituminous compound complete all as specified and directed

M&L for two coat cement plaster ,first coat 15mm thick CM 1:6 on brick wall surfaces and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed. (Note:-WPC shall be measured and paid seperately under respective item).

Supply only integral water proofing compound (WPC) complete all as specified and directed

M&L for rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & fair complete all as specified and as directed

M&L for precast cement concrete 1:1.5:3, type B1 (using 20mm graded stone aggregates) as in kitchen platform slab, shelf slab, manhole cover slab etc including necessary form work etc., complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.

M&L for mild steel TMT bars 10mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed

S&F 25 mm bore MS chromium plated conduit drapery rods, suitable for door/widows curtain with dooms with brackets fitted to each end and fixed to wall incl. removal of existing rod and making good the disturbed surfaces complete all as specified and directed

Taking down chowkats/frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed

Taking down chowkats/frames of area exc 1.5 Sqm and not exc 4.0 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed

S&F 125mm X 60mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 (using 20 mm graded stone aggregate) with and including filling the hollow portion of pressed steel frame with PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate complete all as specified and directed

S&F 35mm thick second class hardwood factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces ( The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 35mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fritted to chowkats complete all as specified and directed.

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 (using 20 mm graded stone aggregate) with and including filling the hollow portion of pressed steel frame with PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate complete all as specified and directed

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm complete all as specified and directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm complete all as specified and directed.

S&F mild steel pressed handles, oval type, stove enamelled black, size of handle 125 mm complete all as specified and directed

S&F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws complete all as specified and directed

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F steel work in purlins/rafters/posts with round/rectangulal/ square hollow mild steel section complete all as specified and directed

S&F pre-painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and directed

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces of walls and applying two coat of acrylic distemper over a coat of interior primer incl. preparation of surfaces of walls complete all as specified and directed

M&L for applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces of walls and applying two coat of acrylic distemper over a coat of interior primer incl. preparation of new wall surfaces of walls complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats exterior emulsion paint over one coat of exterior primer including preparation of surfaces of old decorated walls complete all as specified and directed. Make:-Asian ACE or equivalent make as specified in Appx 'C' of Particular Specification

M&L for preparation of new plastered surfaces of walls and applying two coats exterior emulsion paint over one coat of exterior primer complete all as specified and directed. Make:- Asian ACE or equivalent make as specified in Appx 'C' of Particular Specification

M&L for complete removal of existing treatment and applying three coats of white wash over ceiling surfaces including preparation of surfaces of old surfaces complete all as specified and directed

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall including mild steel clamps complete all as specified and directed.

Removing excavated materials (soil) to a distance not exc. 150 m and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, single (single 'T') equal or unequal complete all as specified and directed .

S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directed

S&F in repair chromium plated bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repair angular stop valve , 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair vitreous China squatting pan 'Orissa pattern' size 580mmx440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap complete all as specified and directed

S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend . complete all as specified and directed.

S&F in repair concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair complete all as specified and directed.

S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed.

S&F in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia (Make prayag) complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed..

S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of 1000 Ltrs Capacity including dismantling water tanks complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

M&L for PCC ( 1: 2: 4,) type B-0 (using 12.5mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height complete all as specified and directed. .

M&L rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed.

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and directed:-

(a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (c ) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (f) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

Dismantling of wall ceiling board (fibre,pulp,insulation etc) or insulation board/slab/ blankers,any thickness ,including cover fillets complete all as specified and directed.

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F white Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed.

S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame including Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. one brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed.

S&F steel window with side hung shutters without glazing bars and fixed to steel frame complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly complete all as specified and directed.

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]

M&L for walling of random rubble, brought up to course well bounded bedded and solidly hearted built in CM(1:4) complete all as specified and directed.

All as per Srl item No 91 as above but except stones -ditto- Note:-Serviceable stones obtained from demolition shall be re-used in this item

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and n. exc. 0.18 sqm (400 x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match colour of tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for mirror polished machine cut Kota stone slab flooring 20mm to 25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for cement concrete type C1, 1:3:6 (using 20mm graded stone aggregate) as in foundation filling and mass concrete or lean concrete complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4), type B1 (using 20mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed.

M&L for rendering 20mm thick cement plaster in CM(1:6) on stone masonary / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for old preparation of wall surfaces and applying two coats of white wash on wall surfaces complete all as specified and directed.

M&L for old preparation of surfaces and applying two coats of white wash on ceilling surface complete all as specified and directed...

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

S&F steel rolling shutters of 1.25mm thick laths, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type including taking down old shutter complete all as specified & directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F ball bearing for rolling shutter complete all as specified & directed.

M&L for two coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfaces such as removing all splashes, drops, dirt and leaving premisesin a clean state complete all as specified and directed.

M&L for PCC (1: 2:4), type B-0 (using 12.5mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope, finished the surfaces even and smooth without using extra cement complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed..

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of 500 Ltrs Capacity including dismantling water tanks complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed.

M&L for 18mm to 20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed.

M&L for rounding/ chamferring and polishing to edges of granite stone slabs one edge , such as in steps , cooking plateform,window cill and other similar situations complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) mass concrete as in foundation filling and mass concrete complete all as specified and directed..

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F chain link M S galvanised fencing of any size and dia complete all as specified and directed. Make:-TATA/SAIL/JINDAL

S&F mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note:- Each line wire to be measured).

S&F 10mm dia & over mild steel round or square bars fixed behind chain link fencing as guard bars etc and similar articles complete all as specified and directed.

M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in coping, benching and other similar work (location) with weathering slightly rounded edges and throating etc as required with and incl all necessary form work complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide Zinc chrome primer complete all as specified and directed.

Dismantling posts or struts (wood,steel or RCC ) in natural ground any section , including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of barbed wire of any thickness or size complete all as specified and directed. .

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 80mm thickness M-35 grade with grey cement and pigment laid over and including 40mm thick uniformly levelled surface of stone dust cushioning complete all as specified and directed.

M&L for rendering 15 mm thick on surface other than fair face of brickwork or stone masonry surfaces with CM 1:4 finished even & fair complete all as specified and as directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends complete all as specified and directed.

Add or deduct for each 25mm girth or part there of over or under 30 cm complete all as specified and directed.

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

Taking down main switch, DB of any capacity complete all as specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of external diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-

One light, fan point controlled by one switch

One 5 Amp independent socket point controlled by one switch

One 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No. 127 here in before but for power point wiring using with 2.5 sqmm PVC-FR insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directedSchneider

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F modular fan step regulator 120W, 2 module complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.136 above but SPN 63 Amps, 240 V

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed

S&F exhaust fan, metallic body AC single Phase. 230V of size 300m sweep with blades and frame and louvers including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed . Make - Havells Ventil Air-DS/Bajaj MAXX AIR/Crompton EXHD300-6-1.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm, 2 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed

M&L for sand cushioning in trenches for the cable complete all as specified and directed

Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed.

S&F in replacement of GI Pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion. complete all as specified and directed. Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

M&L LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj cat part No BCLSB 20 WH/ CG Cat part No LCTC-18-CDL

M&L concealed sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F ceiling fans complete with blades, down rods, and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. five star rated with brushless direct current motor (BLDC) complete all as specified and directed

M/S vikas jain

maharaja construction and suppliers

SAGAR MOTOR AND TRACTOR CO

v k builder

EX SERVICE MEN SECURITY AND MAN POWER SERVICES