C/O Veternary Hospital Building at Chopal Thehsil Chopal Distt Shimla

Amount

Filling in plinth with sand under floors including watering, ramming, consolidating & dressing complete ( As per code No. 07070000 Page 131 ) .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction

Providing form work with steel plates 3.15mm thick welded with angle iron in frames 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00 meters and removal of the same for in-situ reinforced concrete and plain concrete work in :-

b) In flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto 200mm in thickness. ( As per code No. 0805020100 Page 144 )

Providing and laying cement concrete 1:6:12(One cement: Six sand: Twelve graded broken/crushed stone aggregate 40mm(forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals.. .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification clauses 802. 804, 805, 806, 807, 1202, and 1204 P C C grade (i) nominal mix (1.4.8). 20mm size including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing and laying cement concrete work mechnically mixed & vibrated 1 : 1.5 : 3 ( 1 cement .5 sand : 3 graded crushed stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

a) Suspended floor,roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor in all level

Providing and laying cement concrete 1:1.50 :3 mechnically mixed ( 1 cement : 1.5 sand : 3 graded crushed stone aggregate 20mm nominal size ) reinforced concrete Chajjas not exceeding 10 centimetre thickness upto floor in all level including finishing the exposed surface with cement mortar 1:3 ( 1 cement : 3 sand ) to give a smooth and even surface centring/ form work and curing complete excluding the cost of reinforcement.

Providing Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wires completed and other incidentals due for its completion for all floors, within all leads and lifts of materials and other incidentals. Above plinth level upto all floor level.

ii) Second class brick work using common burnt clay building bricks in all floor levels in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts :- Above plinth level upto all floor level

Second class brick work using common burnt clay building bricks in all floor levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts :- Above plinth level upto all floor level

Providing & fixing 12mm thick preliminated board both side bwp phenol bonded exterior interior grade panelled shutters with frame of first class deodar wood for doors, including bright finished / black enamelled iron butt hinges with necessary screws 40mm thick frame including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing and fixing 19mm thick water proof termite resistant commercial board cub board of size 2.05 x 2.65 x 0.50 metre deep with shutters having three shelves & vertical partitions of 19mm thick board, back side of cub board shall be of 8mm ply. All exposed cut portions of the boards shall be fixed with hard wood edging of size 19mm x 6mm complete with paino hinges, brass handles,magnetic catchers & Godrej almirah type locks.The exposed surface of shutter shall be laminated with 1 mm thick limination of approved shade & make with necessary scerws, nails & fevicol etc. complete as per drawing

Providing and fixing mild steel plain grill of required pattern in frames of steel etc. with mild flats, square or round bars with round headed bolts and nuts or by screws. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing anodized aluminium sliding doors bolts anodized colour & shade with bolts & nuts screws etc. complete.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

a) 300x16mm size

b) 250x16mm size

Providing & Fixing aluminium tower bolts ( Barrel type ) anodized transparent or dyed to required colour with screws etc. co mplete :-.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & Fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. :-.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

a) 125 x 10mm size

b) 100 x 10mm size

c) 75 x 10mm size

Providing & fixing andoized aluminium fan light pivot with necessary screws :-.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing andoized aluminium fan light catch with necessary screws .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing 300mm long anodized aluminium chain for fan light catch including necessary screws complete. .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Precast terrazo tiles hydraulic compressed 20mm thick ( with marble chips of specified sizes30 x 30 cm. size ISI marked IS No. 1237 laid in floors, treads of steps & landings on a bed of 25mm average thickness of cement mortar 1:6 (1 cement : 6 sand ) jointed with neat cement slurry mixed with pigmant to match the shade of tiles ( wherever required ) incliding rubbing & polishing complete with tiles of following shades with 70 % white & 30 % grey cement having 55 % white chips & 15 % each yellow & dark green,mehroon Chips. .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & laying spartic ceremis tiles 5.5mm thick in flooring ( 300 x 300 mm size ) treads of steps laid on bed of 12mm thick cement mortar 1:3 ( 1 cement : 3 sand ) finished with flush pointing in white cement .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete..including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

White glazed tiles 6mm thick in skirting risers of steps & dedo 12mm thick cement mortar 1:3 ( 1 Cement : 3 sand ) & jointed with cement slurry: including rubbing and polishing complete..including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Kota stone slab 25mm thick in risers of steps, skirting,dedo & pillars laid on 12mm ( Average ) thick cement mortar 1 : # ( 1 cement : 3 sand ) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete with white cement. .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Precast terrazo tiles hudraulic compressed 20mm thick ( with marble chips of specified sizes ) in skirting & risers of steps not exceeding 30cm in height on 10mm thick cement plaster 1 : 3 ( 1 Cement : 3 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles ( wherever required ) including rubbing & polishing complete with tiles of following shade with 70 % white & 30 % grey .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & laying marble work ( Table rubbed & polished ) in flooring 20 mm thick base in cement mortar 1: 3 ( 1 cement : 3 sand ) including jointing with cement mortar 1 : 2 ( ! White cement : 2 2 marble dust ) with an admixure of pigment to match the shade of the marble 20mm thick Baroda Green marble slab having semi round nosing .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing 15 cm wide 45 cm over all rectangular plain G.I. sheet gutter with iron brackets 40x 3mm size bolts & nuts & washers etc. including making necessary connections with rain water pipe complete as per design 0.63mm thick sheet.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating of back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia metre with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing & fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia metre & Pre--painted G.I. limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing & fixing valley 60cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia metre & Prepainted G.I. limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing & fixing M.S. B.P. sheet 1.66mm to 2mm thick eaves board/ Facia/ Soffits/ ceiling including cutting, fixing & welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer-in- Charge ( Base member of steel work shall be measured & paid for separately .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing on wall face PVC ( D-Plast ) rain water pipes of working pressure not less than 4.5 Kg/ Sqm including filling the joints with approved adhersive complete 150mm dia pipes .including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing M.S. holder bats clamps of approved design to Cast iron or S.C.I. pipes embeded in & including cement concrete block 10 x 10 x10 cm of 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size)& cost of cutting holes & making good the wall etc.150mm diametre for PVC pipe including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing on wall faces PVC ( D-Plast ) accessories for rain water pipe including filling the joints with approved adhesive complete. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

PVC Plain bend 150mm dia

PVC Plain bend 150mm dia

Steel work welded in built up sections, trusses & framed work, including cutting, hoisting,fixing in position & applying a priming coat of red lead paint in :-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

a) In grating framed guard bars, ladders, railing, brackets & similar works

b) In trusses & trussed purlins in buildings

Providing & fixing mild steel fan clamp type-I of 16mm dia M.S. bars bent to Shape with hooked ends in RCC slab during laying including painting the exposed portion of loop all as per standard design complete.-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing mild steel round holding down bolts or anchor bolts with nuts & washers plates completes -including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing angle iron doors frames ( Single rebate ) manufactured from steel iron section of 40x40x4mm & M.S. flat 50 x 4 mm as per drawing & design including hinges, jambs,lock jamb beed if required angle thrashold of mild steel angles 50 x 25mm welded or rigidly fixed by mechanical means lugs with split & tails to each jamb including steel butt hinges 2.5mm thick with provision for locking arrangement & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as per detailed drawing & as per the direction of the Engineer-in-Charge.

Providing & fixing windows & ventilators frames manufacture from mild steel channels 75x40 mm for end frame & for centre frame 75 x 40mm & mild steel flat 75 x 4mm in combination welded together to make one frame to making square steel section with 20x 4mm & 12 x 4 mm mild steel flat structure of rolled steel section T-7B including glass pans 4mm thick in glazing panel & wire gauge shutters of designation 85G with wire of dia 0.56mm & fixed glazing fixed with T-section including priming coat as per drawing.

Providing & fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in stright length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete ( M.S. flat & balusters of railing shall be measured & paid separately )-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Painting two coats ( excluding priming coats ) on new steel & other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt dust & other foreign mtter Enamel paint other than white.)-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Applying a priming coat over new wood & wood based surfaces after & imncluding preparing the surface by thoroughly cleaning oil, grease, dirt & other foreign matter, sand papering & knotting, Ready mixed paint brushing wood primer pink.-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Painting two coats ( excluding priming coat ) on new wood & wood based surfaces,with ready mixed paint, brushing to give an even shade including cleaning oil all dirt, dust & other foreign matter,sand papering & stopping, ready mixed paint other than white.-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

6mm cement plaster to ceiling in cement mortar 1:3 ( 1 cement : 3 sand )-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

15mm cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in grith & finished even & smooth in cement mortar 1:6 ( 1 cement : 6 sand )-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

15mm cement plaster in single coat on the fair side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in grith & finished even & smooth in cement mortar 1:6 ( 1 cement : 6 sand ) -including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Finishing wall with weather proof exterior grade emulsion of approved design ( Apexultima )or its equarlied on nun-decorated wall surfaces ( two coats ) to give an even shade & final finish after throughly cleaning the surface to remove all dirt, dust & other foreign matter etc. including sand papered smooth complete.-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

White washing with lime on un-decorated wall surface ( two coats ) to give an even shade on ceiling and / or slopping roof including thoroughly brooming the surface to remove all dirt, dust,mortar drops & loose scale of lime wash & other foregn matter.-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Distempering ( two coats ) with oil bound washable distemper of approved brand and manufacture & of required shade on un-decorated wall surface to give an even shade over & including a priming coat with distemper primer of approved brand & manufacture after thoroughly brushing the surface free from mortar dropping & other foreign matter & also including preparing the surface even & sand papered smooth.Priming coat with distemper primer.

Providing under layer for plinth protection of 75mm thick ( Unconsolidated thick )bed of dry brick/ stone aggregate 40mm nominal size with rammed & consilidated & grouted with fine sand including preparation of ground.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing plinth protection 50mm thick in cement concrete 1:3:6 ( 1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size ) including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Constructing course rubble hammer dressed " U" shape open surface drain with side wall 15 x 22 cm in cement mortar 1:6 (1 cement : 6 Sand ) & inside plastering with cement plaster 1:3 ( 1 cement : 3 sand ) including earth work & laying 10cm cement concrete in 1:5:10 ( 1 cement : 5 sand :10 graded stone aggregate 40mm nominal size ) & 7.5 cm. cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate of 20mm nominal size ) & finished with a floating coat of neat cement complete as per stadard design

Excavation in drains & channels etc. in earth work including dressing of side & bed and disposing of excavated earth upto na lead of 20 metres & lift upto 1.50 metres disposed earth to be levelled and neatly dressed in Pick jumper work. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & laying in trenches galvanised mild steel tubes ( Medium grade) tube fitting ( earth work to be measured & paid for separately ) 15mm nominal bore. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing to wall ceiling & floor galvanised mild steel tubes (medium grade ) tube fitting & clamps including making good the walls, ceiling & floor.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

a) 15mm nominal bore

a) 15mm nominal bore

Providing & fixing Vitreous China water closet squatting pan ( Indian type WC pans ) size 580mm ( earth work, bed concrete, foot rest & trap to be measured & paid for separately including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing 100mm size " P " or " S " trap for water closet ( Squatting pans )including jointing the trap with pans & soil pipe in cement mortar 1:1 ( 1 cement : 1 Sand ) sand cast iron.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing 10.0/12.5/15.00 litre P.V.C. Low level & duel flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass valve with polythene float,C.P. brass handle unions & couplings for connections with inlet,outlet & overflow pipes, 40mm dia C.P.flush & including cutting holes in walls & making good the same & connecting the flush bend with cistern & colset ( Over flow pipe to be measured & paid for separately )

Providing & fixing Vitreous China Flat back No. 5004 in Cera urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp ( Waste pipe to be measured & paid for separately ) Flat back type size 430 x 260 x 350mm..including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing Cast iron floor trap of self cleaning design with sand cast iron screwed down & hinged grating without vent arm complete including the cost of cutting & making good the wall & floor 75mm nominal diametre including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing 32mm dia C.P. brass waste for wash basin or sink.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing 32mm dia lead waste pipe wash basin or sink including brass check nut. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing 600mm x 450mm bevelled edge mirror of Superior glass mounted on 6mm thick A.C. sheet or Plywood sheet & fixed to wooden plug with C.P.brass screws & washers. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing C.P. brass Toilet paper holder, C.P. brass.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing C.P. brass Towel rail complete with C.p. brass brackets fixed to wooden plugs with C.P. brass 600mm x 20mm ISI marked.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing Chromium plated ISI marked No. IS 8931,8934, brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing C.P.brass Bib tap ( Superior or heavy tyape ) ISI marked in sink with capstan head 15mm dia..including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing C.P. brass pillar tap with capstan head 15mm dia.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing Stop cock 15mm dia.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing PVC connection 45cm length with brass union,45cm length ,15mm nominal bore. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing brass full way valve with wheel, 15mm nominal size. including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & fixing C.P. brass chain 50cm. Long & rubber plug of following sizes of sink or wash basin , 32mm dia.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & laying ( to level or slopes ) & jointing with stiff mixture of cement mortar in the proportion of 1 : 1 ( 1 cement : 1 sand ) salt glazed stone ware pipe grade " A " 150 mm dia including testing of the pipes & joints complete.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts..

Providing & laying cement concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size ) bedding for stone ware pipe of the following internal diameter stone ware pipe 100mm dia including testing of the pipes & joints complete.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Providing & fixing sand cast/ cast iron spun spigot & socket soil waste & ventilating pipes ( Lead caulked joints to be measured & paid for separately )including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

i) 100mm nominal size

ii) 75mm nominal size

Providing & fixing cast iron holder bats clamp including steel bolts & nuts to S.C.I. pipes embedded in cement concrete block 100 x 100 x 100 mm of 1:2:4 ( 1 cement : two sand : 4 graded crushed stone aggregate 20mm nominal size ) including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

i) 100mm nominal size

ii) 75mm nominal size

Providing lead caulked joints to S.C. I. or C.I. pipes & fittings including testing of the joints but excluding the cost of lead :-including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

i) 100mm nominal size

ii) 75mm nominal size

Providing & fixing sand cast iron/ cast iron fitting & accessories :-.including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

a) Single equal branch of required degree ,with oval access door insertion rubber washer 3mm thick bolts, & nut complete.

i) 100mm nominal size

ii) 75mm nominal size

b) Single equal branch of required degree, plain.

i) 100mm nominal size

ii) 75mm nominal size

c) Double equal branch of required degree ,with oval access door insertion rubber washer 3mm thick bolts, & nut complete.

i) 100mm nominal size

ii) 75mm nominal size

d) Plain :- Single equal branch of required degree, plain.

i) 100mm nominal size

ii) 75mm nominal size

e) Single unequal branch of required degree ,with oval access door insertion rubber washer 3mm thick bolts, & nut complete.

i) 100mm nominal size ii) 75mm nominal size

f) Single unequal branch of required degree, plain.

i) 100mm nominal size ii) 75mm nominal size

g) Collars

i) 100mm nominal size

ii) 75mm nominal size

Providing & fixing stay & clamp for sand cast iron pipes including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

i) 100mm nominal size

ii) 75mm nominal size

Providing & fixing Cast Cowl including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

i) 100mm nominal size

ii) 75mm nominal size

Constructing brick masonry for under ground cast iron inspection chamber & bends with common burnt clay building bricks in cement mortar 1:5 ( 1 cement : 5 sand) Cast iron cover with frame (light duty)655mm x 610mm internal diamemnsions total weight of cover with frame to be not less than 38 Kg ( Weight of cover 23 Kg & weight of frame 15 Kg ) RCC top slab with 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 ( 1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size ) inside plaster 15mm thick with cement mortar 1:3 ( 1 cement : 3 sand ) finished smooth with a floating coat of neat cement on walls walls & bed concrete etc. complete .inside diamension 455mm x 610mmx450mm deep

a) inside diamension 600 mm x 850 mm x 450 mm deep for pipe lines with three or more inlets

b) inside diamension 455mm x 610mmx450mm deep single pipe.

Providing & fixing PVC storage tank complete with 40mm nominal side bore galvanised bore galvanised mild steel scour tube with fitting 25mm nominal bore galvanised mild steel over flow tubes with fitting & mosquito proof coupling of approved design 15mm nominal size ball valve & mosquito proof coupling PVC case with locking arrangement including pad of size required upto all height 2000 litre net capacity storage tank.

Construction of main hole cover with R.C.C. top slab 1:2:4 ( 1 cement : 2 sand : 4 graded crushed stone aggregate 20mm nominal size ) & foundation concrete 1:4:8 ( 1 cement : 4 sand : 8 graded crushed stone aggregate 40mm nominal size ) in side plastering 15mm thick with cement plaster 1:3 ( 1 cement : 3 sand ) & finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded crushed stone aggregate 20mm nominal size ) finished smooth complete :-

i) In side size 800 x 800 x 500mm deep including cast iron cover with 200mm thick wall of brick masonry with cement mortar 1:3 ( 1 cement : 3 sand )

ii)In side size 800 x 800 x 1000mm deep including cast iron cover with 200mm thick wall of

Supplying cast iron cover without frame for main hole cover internal diamension 455 x 610mm including carriage of all labour, material and equipments to various location through all modes of transportation as per HPPWD specification 1990 vol.I and as per direction of Engineer in Charge at site in all leads and lifts.

Naveen Kumar