ESTIMATE FOR CONSTRUCTION OF NON- GRAVITY OUTLETS FOR MICRO-IRRIGATION (SPRINKLER) SYSTEM AT VARIOUS RDs OF KANDI CANAL STAGE-1 HOSHIARPUR

Amount

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.((a)) Earth work upto 1.5 m. Depth for (i) All classes of soil except rocky

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (xxiii) 160mm o/d PVC pipe of 4 Kgf. / sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (xxv) 250mm o/d PVC pipe of 4 Kgf. / sqcm

Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (b) Size 0.9 m. x 0.9 m.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

Cement concrete 1:8:16 (b) With stone aggregates 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:2:4 (a) With stone ballast or shingle (i) mixing by manual means

12.5 mm thick cement plaster 1:4

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm (for EHD and HD).(A) RCC Man hole cover with Frame (a) 560mm i/d RCC man hole cover with frame as per ISI (ii) Heavy duty

Foot Rest for Manhole. (1) Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturers permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. ((c)) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

PVC pipe 90 mm dia class 2, 4kg/cm2,IS 4985:2002 Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 90 mm o/d pipe of 4 Kg. /sqm complete in all respect

PVC pipe 32 mm dia class 4, 10kg/cm2,IS 4985:2002 Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 32 mm o/d pipe of 10 Kg. /sqcm complete in all respect

Providing, Laying , fixing & jointing of Mini Sprinkler Complete Set(ISI marked with the prior approval of Engineer-in-Charge) complete in all respect

Supply and fixing mini sprinklar lateral line 32mm dia pressure confirming to relevent is code with latest ammendments of any at site of work completet in all repects as per specifications,design drawing of engineer in charge (32 mm LLDPE PLAIN LATERALS 2.5 Kg/cm2, Class 2)

Providing, fixing & jointing of butterfly valve(SS Disc) 160 mm of ISI marked with the prior approval of Engineer-in-Charge

Providing, fixing & jointing of Control Valve of 90 mm of ISI marked with the prior approval of Engineer-in-Charge complete in all respect

Providing, fixing & jointing of Control Valve of 32 mm of ISI marked with the prior approval of Engineer-in-Charge complete in all respect

Providing, fixing & jointing of S/M Flush Valve 90 mm of ISI marked with the prior approval of Engineer-in-Charge complete in all respect

Providing, fixing & jointing of Screen Fiilter 50 m3 ISI marked with the prior approval of Engineer-inCharge complete in all respect

Providing, fixing & jointing of sand Fiilter 50 m3 ISI marked with the prior approval of Engineer-inCharge complete in all respect

Providing, fixing & jointing of venturi assembly of 2" ISI marked with the prior approval of Engineer-inCharge complete in all respect

Providing, fixing & jointing of air release valve of 2 " ISI marked with the prior approval of Engineer-inCharge complete in all respect

Providing, fixing & jointing of air release valve of 1" ISI marked with the prior approval of Engineer-inCharge complete in all respec

Providing, fixing & jointing Bypass 2.5 " ISI marked with the prior approval of Engineer-in-Charge complete in all respect

Supplying and fixing of Service Saddle 90 mm x 32 mm confirming to relevent IS code with latest amendments if any,at site of work complete in all respect as per specifications, design,drawing and instruction of Engineer-in-charge

Providing, fixing & jointing of complete solar pump set of 15HP of ISI marked with the prior approval of Engineer-in-Charge complete in all respect with following spoecification :15 hp photovoltaic water pumimg system,Ac submesible motor pump set of 15 HP (15kw) capacity. solar PV array of 14400 WP . Hot dip galvanized module mounting structure cable with stand 80km/hr wind speed ,installation of 3 NOs earth pit.the scope convert the entire installation process,successful commissioning and comprehensive maintance contract for period of 3 year which include all parts and service.

Providing, fixing & jointing of complete solar pump set of 5HP of ISI marked with the prior approval of Engineer-in-Charge complete in all respect

Providing and Fixing Stainless Steel 50 mm Micron Screen on inlet pipe connected to sump

Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Any Other Item (CSR )

BHUPESH MITTAL CONTRACTOR (BID ID -702556)

SITA RAM CONTRACTOR (BID ID -701008)