9-2(3)/2019-20-Engg(HRDC)

Amount

Day to day general maintenance of plumbing and sanitory installation, fittings and fixtures by repairing / replacment of un-serviceable fitting fixtures and G.I. pipe lines with smooth functioning of the water supply and sanition services at HRDC Office as well as Residential and Guest house campus including plumbing work of pump house. By deploying of one plumber and one helper regular basis on working days througtout the year. (Fittings & fixtures shall be provide by the department). Details as per annexure-I

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

[a] One or more coats on old work

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

[a] One or more coats on old work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

[a] 1:2:4 (1 Cement: 2coarse sand: 4 graded stone aggregate 20 mm nominal size)

Brick work thick with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

[a] Cement mortar 1:6 (1 cement : 6 coarse sand)

12mm cement plaster of mix;

[a] 1:6 (1cement: 6 course sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

[a] 1.5 mm thick

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With Float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm

Supply of following materials for day to day maintanance works:

Phase (Medium) (2no.)

Phase (Havey) (4no.)

Phase half turn (Medium)

Phase half turn (Havey)

Phase Varser

PVC cystern Handle

PVC cystern ball cock

Cysterm syphan varser 15mm + 20mm

Cysterm syphan varser 25mm

PVC - EWC hinges

Cascade PVC - EWC hinges

Flush butten

Single piece syphan ball cock

Single piece syphan glass 6"

Wall hanging cystern varser -4"

PVC Connection one sided

P.V.C. connection pipe Varser

PVC Jet spray

PVC Hand shower (Prayag)

Bracket for soap tray

Water tank threaded cover with base

Brass extension nipple 15mm

CPVC shocket 15mm

CPVC shocket 20mm

CPVC shocket 25mm

CPVC Elbwo 15mm

CPVC Elbwo 20mm

CPVC Elbwo 25mm

CPVC Union 15mm

CPVC Union 20mm

CPVC Union 25mm

CPVC Tee 15mm

CPVC Tee 20mm

CPVC Tee 25mm

CPVC MT 15MM

CPVC MT 20MM

CPVC MT 25MM

CPVC Brass Elbwo 15mm

CPVC Brass Elbwo 20mm

Sapheda

Teflon tap (M)

White cement

Rowel plug 25mm

Aluminium window handle left & right

Door latch

Brass cupboard lock 6 levers of approved quality, 40 mm size

Hydraulic door closer tubular type Aluminium section body

8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.

Mirror of superior make glass 60x45 cm

White plastic seat (solid) with lid C.P. brass hinges and rubber buffers

C.P.brass toilet paper holder of standard size

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

PTMT - Bottle Trap 31/32 mm

Polyethylene water storage tank with cover and suitable locking arrangement

Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore

C.P. Brass bibcock 15 mm

C.P. Brass long body bibcock 15 mm

C.P. Brass angle valve 15 mm

PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia

SUBODH KUMAR SINGH