CERTAIN REPAIR TO FENCING, AREA DRAINAGE , BOUNDRY WALL, FOOT PATH, PLINTH PROTECTION AND CERTAIN CONNECTED BR WORKS IN ADE BANGALORE

Amount

Taking down chowkat or framed with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete

Taking down shutters of any description area exc 1 sqm and n. exc 2 sqm each complete

Taking down shutters of any description area exc 1 sqm and exc 2 sqm each complete

M&L for 35 mm th factory made 2nd class hard wood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F flush shutters 40mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S & F flush shutters 40mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per specification and drawings fixed with drilling and min 100 mm screw with rawl plug complete all as specified and as directed

S & F factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed

S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S & F100mm Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and as directed

S & F 150 mm long extruded aluminium alloy handles, fabricated type., anodised complete all as specified and as directed

M & L 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed

M & L Grubbing up tree trunk upto a height of appx 11 mtr including scafolding or hanging arrangement with proper safety gadgets to work force for cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site including plugging/proper treatment to distrubed portion with PCC (1:2;4)/cement mortar mixed with tapcreat material in ratio of 1:1.5:2 (one part of tapcreat and 1.5 parts of cement and 2 parts of sand)/brick work/plaster/surface finish to make good after application of chemical like Hcl or as directed at mother root of the plant/tree complete.(girth measured at ht of 1 mtr from base/ground/wall n.exc 100 cm)

Demolition of brickwork or stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M & L for brick wrok with subclass B bricks straight or curved on plan exc 6 m mean radius built in cm 1:6 complete all as specified and as directed

M & L for RR stone masonary, Bangalore type brought upto coarsed well bonded and bedded and solidly hearted built in CM 1:6 complete all as specified and as directed

M & L rendering 15mm thick in CM 1:4 over stone masonary/brick masonary surface finished even and smooth without using extra cement complete all as specified and as directed

M & L for Keyed pointing on new or old stone masonry in cement mortar 1:4 including rakingout joints etc complete all as specified and as directed

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc of any position and any description.

M & L rendering 15mm thick in CM 1:4 over stone masonary/brick masonary surface finished even and smooth without using extra cement complete all as specified and as directed

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including form work complete all as specified and as directed

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed

Material and labour for PCC 100 mm thick 1:2:4 type B2 using 40 mm graded crushed stone aggregate as in hard standing/foot path etc complete all as specified and directed

Extra for forming fair finished drain or channel upto 55 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Dismantling Barbed Wire of any description including Serviceable Barbed Wire in Safe custody for reuse at Site, complete all as specified and as directed.

Dismentling fencing wire mesh of any type complete all as specified and directed

Dismantling Posts or Struts (Wood, Steel or RCC) any Section, Posts embedded in Natural Ground including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Dismantling Posts or Struts (Wood, Steel or RCC) any Section, Posts embedded in Cement Concrete including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Restraining and resecuring including making good staples etc. for galvanised 2 Strand, Steel Bar-bed Wire (Serviceable Barbed Wire obtained from Item No. 1 here-in-before) including straining and fixing to any type of Standard Rails straining Bolts, securing or tying at cross -ings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc, complete all as specified and as directed. NOTE: Cost of Mild Steel Binding Wire deem to be included in the quoted Unit Rate.

Supply only chain link MS galvanised fencing any size or type.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire if required Note : welding if done shall be measured and paid in appropriate item

Supply and fixing of post and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 gde E - 165. including fabrication at site.

M&L preparing new Steel and Iron Surfaces of any descriptions, over 10 cm in width or girth and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Excavating in Post Holes (or similar holes) in hard/dense Soil, each not exc. 0.50 CUM, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 Cm, watering, and removing surplus soil to a distance not exc 50.00 Metre and making good surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 type D2 (40mm Graded Aggregate) in Foundations, Filling and Mass Concrete, etc. for embedding/fixing RCC Fencing Posts or Struts including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M & L for pre cast RCC cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including demolition complete all as specified and directed

M&L TMT Bars 10mm dia and Over, cut to length, bent to shape as required including Cranking, Bending, Hooking Ends and binding with Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

S&F angle, flat or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M&L Mild Steel Screw Bolts (machine made) 11mm to 15mm diameter of Neck and length of Bolt exc. 10 Cm and not exc. 15 Cm with hexagonal or square heads at one end and screwed the other, or screwed both Ends, each screwed End to be fitted with Washers and one hexagonal or square Nut, complete all as specified and as directed.

M & L spot welding exc 2.5cm but n exc 5cm in length (Thickness of metal to be welded exc 6 but n.exc 9 mm) for fixing of chain link fencing etc.,

Excavation in trenches not exc 1.50 m wide and not exc 1.50 in depth for foundation etc and getting out in hard/dense soil.

Demolition and breaking up drain pipes (Salt glazed wire, AC or reinforecment concrete) set in cement mortar internal dia of pipe in 150 mm.

M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in PCC 1:3:6, type C2 (using 40mmgraded stone aggregate) complete all as specified and as directed

S&F slat-glazed stoneware drain pipes 150 mm internal dia, laid in trenches and jointed complete all as specified and as directed

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel(1/2 of 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required 150 mm dia.

Returning , filling in including spreadng leveling watering and well ramming in layers not exc 25 cm of soft/loose soil.

Removing excavated soil exc 1.50 km and depositing where directed at a level not exc 5km above the starting point

Cleaning top surface of the RCC roof by brushing with wire brushes for removing caked mud etc sweeping with brooming and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and removing from the site from the premises as to where directed by the Engr - in - charge.

All as per item No 51 here-in-before, but AC sheet roofing /Steel sheet roofing complete all as specified and directed. Note : Necessary safety precautions should be taken while working in high rise building

All as per item here-in-before, but valley gutters including scaffolding if required and down rain water pipes complete all as specified and directed.

Cutting and removing grass, bushes, vegetable and unwanted plant growing near rainwater pipes and Y junction of sewar pipe near sanitary lines and parapet of roof, chajjas & shaft portion of building etc and surfaces finishes properly with plaster in cement mortar 1:1 and applying two coats of cement base paint on disturbed surfaces to match the existing surfaces complete all as specified and directed.

M&L for applying three coats of white wash on new surface of wall incl preparation work complete all as specified and as directed

Dismantling of interlocking tiles/chequered tiles any pattern laid bedded and pointed in any mortar

M&L coloured interlocking paver blocks 60mm thick of approved pattern and make, compressed over 50mm thick sand cushioning over compacted earth complete Note : Quoted shall be inclusive of levelling of finished tiled surface with vibrator compacting machine etc complete all as specified and directed.

All as per item No 57 here-in-before, but except interlocking tiles complete all as specified and directed

M & L for sand filling under floors or in foundations including watering and consolidation for laying of interlocking paver blocks (Note : mining sand/stone dust shall be of approved quality and should be free from lumps/broken/flaky aggregate)

Chequered cement concrete tiles (with grey cement and pigment) maunufactured in rubber moulded finish of size not less than 30cm x 30cm x 22 to 25 mm thick, set, jointed and pointed in near cement slurry including 15 mm thick cement mortar screed in CM 1:6 as in floors.

Ditto but except tiles including making good of undulated tiles set right and leave all surroundings finished as it is complete all as specified and directed.

Chequered cement concrete tiles (with grey cement and no pigment) manufactured in rubber moulded finish of size not less than 30cm x 30cm x 22 to 25 mm thick, set, jointed and pointed in near cement slurry including 15 mm thick cement mortar screed in CM 1:6 as in floors.

Material and labour for kerb stone made out of PCC 1:2:4 using 20 mm graded stone aggregate of cross sectional size 150 mm at bottom and 110 mm at top (tapering at length 210 mm height) with overall height 320 mm and 450 mm in length, surface finished even and smooth laid as directed as in road side kerb, setting in cement mortar 1:6 complete.

Preparation of concrete surfaces of any description and applying two coat of synthetic enamel paint in different colours if required over a coat of priming paint as in kerb stone painting complete all as specified and as directed

M & L RCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in chajjas complete all as specified and as directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Formwork of fair finished surfaces to chullah hoods, chajjas, troughs and similar items including edges Note : form work for chajjas upto 11 mtr height included complete

Cleaning of existing drains by desilting/excavating filled up earth nexc. 1.5 m depth and 1.5 m wide on plan and getting out in soft/loose soil. Complte all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour for Durastone heavy duty coloured external tiles, first quality, of size 300mm x 300mm x 10mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. MAKE : SOMANY cat Tactile Jaisalmer / taracotta or equivalent in KAJARIA/ NITCO/ BELL/ JOHNSON

Material and labour for 75mm thick cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as sub base flooring complete all as specified.

Coloured Non Skid Joint less ceramic tiles (non-skid) of size 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed including taking down old screed bed complete.

Coloured glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick screeding bed in cement mortar 1:4 complete all as specified and directed including taking down old screed complete.

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed including taking down old screed bed complete.

M&L Vitrified ceramic tiles of size 10 mm thick light shade, area of each tile exceeding 0.42 sqm and not exceeding 1.00 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed including taking down old screed bed complete.

M&L Vitrified ceramic tiles of size 10 mm thick dark shade, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed including taking down old screed bed complete.

Material and labour for 75mm thick cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in Plinth protection including joint filling with bitumen and sand mixed in equal proportion complete all as specified.

Preparation of external wall surfaces of any kind new or old wall including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, algae due to old leakage/sepages and trading oil and greasy spots complete all as specified and as directed

Ditto but complete removal of existing tretment including raking with steel scrubbers if required and making good to receive new treatment what so ever as directed complete.

M & L for one coat of external wall care putty of approved make not less than 1 mm thick including sand papering to obtain smooth finish to receive priming paint

M & L one coat of priming paint to receive external weather proof acrylic (plastic) washable emulsion complete all as specified and as directed.

M & L two coats of weather coat acrylic emulsion (washable) paint of best quality and tint as approved by GE complete all as specified and directed

Preparation of internal wall surfaces of any kind new or old wall including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, algae due to old leakage/sepages and trading oil and greasy spots

Ditto but complete removal of existing tretment including raking with steel scrubbers if required and making good to receive new treatment what so ever as directed complete.

M & L for one coat of wall care putty for internal wall surfaces not less than 1 mm thick including sand papering to obtain smooth finish to receive priming paint complete all as specified and as directed

M & L one coat of priming paint to receive interior acrylic (plastic) washable emulsion complete all as specified and directed.

Material and labour for two coat of interior acrylic washable emulsion paint with a gap of 24 hours between first coat to second coat complete all as specified and directed by EIC.

Material and labour for preparation of old surfaces of wall and applying one coat of oil bound distemper all as specified and as directed by Engineer-in-Charge.

Dismantling of asbestos cement corrugated sheets of roof covering, north light curve sheets etc., complete. (Height up to 12 to 15 Mtr, factory type bldg/Hangar) .

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, valley gutters etc.,

Material and labour for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering/clading to wall fixed with self tapping screws as specified.

Supply and fixing in repairs of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable for green building application with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixed to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Supplying and fixing in Anodised aluminium snap grid frame work with 20X25 mm 'T' and 20X20mm 'L' section with grid size of 605X605mm including with necessary 3.15 mm GI wire as in suspenders etc complete as specified and directed by EIC

S&F in 4mm thick, designer, non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified. Make:- Everest or equivalent.

Providing and fixing in gypsum Board 12mm thick (as per sample kept in GE office) in ceiling fixed with screw as per manufactures instructions complete all as specified.

S&F in GI frame work for seamless ceiling comprising of GI perimetre channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

Supply and fix health facet chromium plated with flexible pipe including fixing bracket make Jaguar CAT No 573 or equivalent.

S & F Bib tap, fancy type (two way) chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed 15 mm fixed in repairs.

Taking down or up steel tubing and connections and removing to store yard of size 15mm bore.

All as per item No. 100 above but of 20mm bore.

Steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required complete all as specified. Make: Tata/ Jindal/Ravindra

All as per item No. 102 above but of size of 20mm bore

S & F in repairs Chromium plated bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as complete all as specified and directed.

S & F in repairs Stop valve cast copper alloy fancy type 15mm bore with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe.

S & F in repair angle cock fancy type chromium plated 15mm bore complete all as specified. (Make : Prayag/ Parryware/ Jaquor)

S & F in repair 450mm long PVC connection with PTMT check nuts for 15mm bore pipes of approved quality.

S & F in repair toilet paper holder chromium plated fixed to wall with chromiuim plated brass screws

S & F Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, fixed in repair.

S & F in repairs pillar tap fancy type cast copper alloy, with capstan head chromium plated, screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm , complete all as specified and directed. (wt of tap shall not be less than 665 gms).

Vitreous china ware water closet Orissa pattern including 'P' or 'S' trap connecting to trap and to flushing pipe anti Syphonage pipe etc complete with foot rest, fixed as in repairs of size 580mm X 440mm (jointed with epoxy raison to glazed trap) including provision of lime concrete bedding complete all as specified.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white,(excluding fixing bolts, flushing cistern and flush pipe)

S & F in repair PVC low level flushing cistern of cap 10 ltrs including PVC flush pipe for squatting pan fixed to wall ISI marked completed with brackets and accessories and making good to disturbed portion complete matching with existing surface and Making GI pipe connection low level complete.

Ditto but dual type complete all as specified and directed

S&F plastic water closet seat, white , closed pattern, with flat bottom and cover and mild steel chromium plated or aluminized hinging device.

S&F in repairs vitreous china wash hand basin (Pedestal type) white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts.

Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position as in repair iincluding disconnecting exixting tanks of any description all as specified

All as per item No. 118 above but 1000 ltrs in repairs

S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S&F anodised aluminium frame and shutter powder coated for doors and windows, ventilators, partition with one or more rebates including joining cleat,rubber beading for fixing, star lock etc complete.

Hacking out old broken glass from metal framed including punching or drilling out old glazing pins/spring clips from roof of Hangars (Height up to 12 to15 Mtr, factory type bldg/Hangar).

S/F sheet glass, 4.00 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square n.exc. 0.5 sqm in each pane complete all as specified and as directed

All as per above item No. 123 but exc 0.5 sqm in each pane complete all as specified and as directed

S/F pin head sheet glass, 4.8 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square exc. 0.5 sqm in each pane complete all as specified and as directed

Supply and fix rough cast wired figured glass, 6.40 mm thic of are exc 1.00 sqm but not exceeding 1.50 sqm fixed to metal frame complete all as directed.

S/F 9 mm thick pre laminated particle boards exterior grade, prelaminated both sides with decorative choice laminations fixed in aluminium partions/doors with rubber beadings complete all as specified and as directed

Supply and fix in repairs solar control film 50 mircon thick replective type sticked to glass panes as per instruction of manufacturers complete all as specified and as directed.

Sreyas Enterprises

K V RAJANNA

devan enterprises

Atom Engineers and Builders

SAI CONSTRUCTIONS

ARCHANA CONSTRUCTION CO