SPECIAL REPAIRS TO BLDG NO.CET-03 OF 636 EME BN AND SPECIAL REPAIRS TO ROOF OF BLDG NO.P-38 SIGNAL CENTRE ALONG WITH CERTAIN SANCTIONED WORKS UNDER GE SAUGOR

Amount

Demolition of cement concrete un reinforced in ground floors and paving not exc 15cm thickness below or above ground level including removing debris out of MD land complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C2 (using 20mm graded stone aggregates) surface finished even and smooth without using extra cement as in plinth protection including necessary form work to edges and joints to be filled with bituminous sealing compound complete all as specified and directed

M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft/loose soil for shafts, wells, manholes, et., not exc 10Sqm on plan for sewage line & foundation complete all as specified and directed

M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and compacted with mechanical earth compactor including watering complete all as specified and directed

M&L for broken stone or boulders hard core of gauge n.exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed

Removal of surplus soil/excavated material to a distance n exe 50m and deposited where directed at a level not exc 1.5 m above the starting point complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) including water proofing compound @ 2% by wt of cement complete all as specified and directed. Note:-WPC shall be measured and paid separately under respective item

Supply only integral WPC complete all as specified and directed

M&L for applying Birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat over one coat of exterior primer over newly plastered surfaces of walls ,chajjas complete all as specified and directed. Make:- Asian Apex or equivalent make as approved by GE

M&L for complete removal of existing treatment mechanically and applying Birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat over one coat of exterior primer,including properly making 'V' shaped crakes and filling of all crakes with crakes seal incl. preparation of surfaces of old decorated walls etc complete all as specified and directed . Make Asian Apex or equivalent make as approved by GE

M&L for applying two coats of acrylic Emulsion, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 2mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 2mm thick for levelling the surfaces including properly making 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of acrylic Emulsion over a coat of wall primer incl. preparation of old surfaces of walls complete all as specified and directed

M&L for applying three coats of white wash on newly plastered surface of walls including preparation of new surface complete all as specified and directed

M&L for applying two coats of white wash on old wall surface including preparation of surface complete all as specified and directed.

M&L for 600mmx600mmx8mm to 10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles laid over and including 15mm thick screed bed in CM 1:6 including dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding complete all as specified and directed

All as per Srl item No. 19 above but in dado / skirting laid over and including 10mm thick rendering in CM(1:4).

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar including dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding complete all as specified and directed

M&L for glazed ceramic tiles of size 600mmx300mmx7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match laid over and including 15 mm thick rendering in CM 1:4 including dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding complete all as specified and directed

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F coloured non Asbestos designer ceiling cement boards 4mm thick including dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not exc 4 Sqm each complete all as specified and directed .

S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for filling in pressed steel frame complete all as specified and directed.

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for filling in pressed steel frame complete all as specified and directed.

S&F 35mm thick second class hardwood factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces (The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated) complete all as specified and directed

S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width 0.8 to 1.2 m and ht 1.9 to 2.10 M.]

S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F in repairs pre-laminated particle board,18/19mm thick, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood beads all around fixed with screws to timber frame work complete all as specified and directed

S&F continuous (piano) hinges, 30mm, mild steel, bright finish or electrogalvanised complete all as specified and directed

S&F factory made Solid PVC prelam door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with mild steel square tube complete all as specified and directed

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.3 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F Winpire 3 track pre painted steel sliding window 3-track, 2glass panel and 1 mesh panel ,sliding window fabricated from roll formed section made of galvanized steel colour coated/powder coated (base steel as per IS 513 D quality galvanized as per IS 277 with Zinc of 120gm/sqm ) with total coated thickness of 0.58mm primer coat with epoxy primer of 5-7 micron thick ,finish painted with a polyester paint of 12-16 micron thick and back coated with alkyd backer of 5-7 micron or powder coated with pure polyester up to 50-60 micron thick. section for external frame should be off 107X44 mm, section of shutter should be of 35 x 49 mm. section of mesh should be 35 x 49 mm . the window should be paneled with 5mm thick plain flot glass and stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.18mm. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM) . The sections are to be cut to length, join and assembled by mean of corner bracket . The above frames should be fixed to the concrete/ masonary wall by means of self expanding screws. all as specified and directed (Make: NCL ALLTEK & SECCOLOR LTD or equivalent make as approved by GE)

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, similar work conforming to Fe 290, Gde E 165 complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed

S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Dismantling framed work in timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed.

Dismantling unframed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed.

S&F steel work in tubular trusses/purlins/posts (of round/rectangula/square hollow section)including angle cleats for jointing with welding complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed

S&F rolled mild steel plates (plain or chequered) channels square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment GDE Fe410-0 or Fe 310-0 complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed

M& L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for 16mm to18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed

S&F in repair 25 mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with fancy type powder coated ms dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good complete all as specified and directed

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connection complete all as specified and directed .

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20 mm dia GI tubing and connection complete all as specified and directed .

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet precoated coloured trapozoidal profile pattern having tensile strength of 550 Mpa fixed with self driving screws including dismantling of old asbestos cement (corrugated,semicorrugated etc) sheets in roof covering complete all as specified and directed. Make:- TATA BLUE SCOPE (DURA SHINE)/JSW COLOURON+

S&F 0.50mm thick galvalume sheet precoated coloured modular ridge having tensile strength of 550 Mpa suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed. Make:- TATA BLUE SCOPE (DURA SHINE)/JSW COLOURON+

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs capacity complete all as specified and directed

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in CM(1:6) complete all as specified and directed.

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall including mild steel clamps complete all as specified and directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with adhesive joints fixed to walls complete all as specified and directed

S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed

S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed

M&L for providing cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed

Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed

M&L for precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed .

S&F mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed

S&F mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .

S&F in repairs wall mixture 15mm dia with bend pipe for over head shower chromium plated ,cast copper alloy complete all as specified and directed

S&F in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed

S&F in repairs health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe ,cast copper alloy complete all as specified and directed

S&F in repair CP bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs 2 way bib cock with single knob 15mm dia chromium plated, cast copper alloy complete all as specified and directed

S&F in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

S&F in repairs central hole basin mixer chromium plated 15mm dia as in wash basin (fancy type ) complete all as specified and directed

S&F in repairs sink cock wall mounted with 170mm long swivel spout and wall flange chromium plated 15mm dia as in sink (fancy type ) complete all as specified and directed

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair complete all as specified and directed

S&F in repairs purposely moulded looking mirror 5 mm thick glass fixed with studs complete all as specified and directed

S&F PVC connection on pipe 450 mm long with brass nut bolt complete all as specified and directed

S&F in repair vitreous China wash down water closet pan (pedestal pattern)s trap and all fittings , white including white seat cover complete all as specified and directed

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.

S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets and waste pipe complete all as specified and directed

S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed

Excavation over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block glossy finished chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment including 40mm stone dust cushioning including coping of PCC 1:2:4 type B1of size 150x100mm using 20 mm graded stone aggregate all around including dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete Gde Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F reinforced concrete pipes 150mm dia, class NP2, laid and jointed complete with socket and spigot joint and sealed including demoltion and breaking up existing sewage (SGSW / AC pipes and the like, 150/200mm bore set in cement mortar and removing demolished material to a distance exc 50m and not exc 100m complete all as specified and directed

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed

M&L for concrete bed of PCC 1:4:8, type D2 (using 40mm graded stone aggregates) for RCC pipes 150mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete as specified and directed

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping, benching and other similar work (location) with weathering slightly rounded edges and throating etc as required with and incl all necessary form work complete all as specified and directed

M&L for 100 mm thick cement concrete type D1, 1:4:8 (using 40mm graded stone aggregates) as in sub base complete all as specified and directed

M&L for 100 mm thick PCC type B-1, 1:3:6 (using 40mm graded stone aggregates) complete all as specified and directed

Excavation in post holes (or similar holes ) each not exc. 0.5Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cum, watering and removing, surplus soil to distance not exc 50 mtr and making good surfaces in soft/loose soil complete all as specified and directed.

M&L for PCC 1:2:4, type B-2 (using 40mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

S&F pre- painted galvalume Aluminum Zinc coating GI based coloured trapozoidal profile pattern steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. Make:- TATA BLUE SCOPE (DURA SHINE)/ JSW COLOURON+

S&F pre-painted galvalume Aluminum Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Make:- TATA BLUE SCOPE (DURA SHINE)/JSW COLOURON+

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (400mm x 400 mm ) fixed with 3 mm thick spacer as in floor set in neat cement slurry and pointed coloured epoxy grout to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 600mmx 300mm x 7mm to 8 mm thick, fixed with 3 mm thick spacer , on vertical surfaces such as skirting/dado, etc., set in neat cement slurry and pointed coloured epoxy grout to match laid over including 15 mm thick rendering in CM 1:4 complete all as specified and directed .

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope, finished the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats exterior emulsion paint over one coat of exterior primer incl. preparation of surfaces of old decorated walls complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items including taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height:-

The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed (Note:-WPC shall be measured and paid separately)

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm

Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and directed:-

For one light, fan point controlled by one switch

For one call bell point controlled by one push button switch.

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.3 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed

All as per Srl item No. 116 here in before but for power point wiring using with 4 sqmm PVC FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 4 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed

M&L for point wiring for one light point controlled by one switch with 1.5 Sqmm PVC insulated FR, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing-n-caping/ pvc conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green.

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt complete all as specified and directed

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined, 2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F modular fan step regulator 120W, 2 module complete all as specified and directed

S&F modular bell push 6A ,1 module complete all as specified and directed

S&F call bell ding dong 230 Volt , single phase complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.130 above but SPN 63 Amps, 240 V

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed

S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed

S&F MCCB 100 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed

S&F double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed

M&L LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make:- Havells cat part No LHEXCGP7UN5W013/BAJAJ cat part no BIBWP10WLED /CG cat part No LBH-10-CDL.

S&F post top energy saving, environment friendly long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source complete all as specified and directed. Make:- Havells Cat part No CORALPT35WLED757PSYMTOPC /HALONIX cat part No HLPT-04-40-CW/Bajaj cat part No BGCL 40W LED WH.

Taking down fan ,sealing cable end,dismantling blades and removing fan and blades to store and refixing/hanging in only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

M&L for surface conduit sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 2.5 sqmm (for main current) drawn in & incl PVC conduit of suitable size, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 2.5 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7IN1W009/Bajaj cat part No BCLSB10WH/ CG Cat part No. LCTL-9-CDL

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed. Make -Bajaj frehee 300/CG Trans Air 12"/Havells Ventil Air-DS

S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make:- Racold(Andris-R)/ Havells cat part no GHWAMJSWH025/Bajaj(Calenta)

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 6 sqmm 2 core complete all as specified and directed.

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 50 sqmm, 3.5 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable and getting out in any type of soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed

M&L for kiln burnt bricks sub class B laid in trenches for cable protection complete all as specified and directed

S&F in replacement of GI Pipe light grade 80 mm dia ISI marked on pole on wall or laid in trenches incl all fittings cutting of trenches (nut, bolt, clamps & washers) complete all as specified and directed

All as per Srl item No.151 above but 50mm bore

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors GI tubing and connection complete all as specified and directed .

Cutting existing GI tubing for alterations ,screwing existing tube size of 40 mm and 50 mm dia for new connection including earth work and clamp, neccessory fitting as per site required complete all as specified and directd

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

Supplying, laying, jointing, testing and commissioning XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm, 4 core complete all as specified and directed.

Supplying, laying and fixing in position galvanized iron pipe 40mm bore light grade fixed to pole with mild steel clamps of required size or laid through wall/under floor/under road/in trenches complete all as specified and directed

Supply and installation of CT operated Trivector meter with RS232 communication of rating 240V, 5-10A with five year hardware waaranty complete all as specified and directed. Make: L&T or equivalent make as approved by GE

Supply and installation of suitable polycarbonate box for LTCT meter complete all as specified and directed.

Supply and installation of ring type CT of rating 60/5A to 800/5 A complete all as specified. Make:AE or equivalent make as approved by GE

Supply and installation of GPRS Modem complete all as specified and directed. Make: AMITECH or equivalent make as approved by GE

Supply and configaration of web based cloud hosted energy management software along with mobile apps with two years defect liability. Make: Innologix or equivalent make as approved by GE

Annual comprehensive maintenance including operation costs such as GPRS charges complete all as specified and directed.

M/S AJAY JAIN