CE BTZ/BTD/TOKEN-03 OF 2021-22 ADDN/ALTN TO STREET LIGHTS AND INTERNAL LIGHT

Amount

Supply and fixing in replacement of LED Bulkhead fitting 1 x 10 Watt, complete with Standard profile linear LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications and all as directed by Engr-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max 10%. (f) IP rating : IP-65. (g) CCT : 6500K (h) Pressure die cast Aluminium housing (j) LED Driver of the make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection minimum 2.5 kV. (m) CRI : Morethan 80 (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement of LED complete fitting including batten and T-8 Retro LED polycarbonate 1 x 20 Watt, appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications all as directed by Engr-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP-20. (g) CRCA pre coated housing with two coloured plastic end cap . (h) LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV. (l) CCT : 6500K (m) CRI : Morethan 80 (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement of LED light fitting 1 x 10 Watt, appx 2 feet long extruded polycarbonate environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications and all as directed by Engr-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Max 10%. (f) IP rating : IP-20. (g) CCT : 6500K (h) LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV. (l) CRI : Morethan 80 (m) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement recessed LED ceiling mounted with wide light window for maximised glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling finishes complete fitting with separate electronic driver and high brightness LED 36 Watt, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed by Engr-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP20. (g) CCT : 6500K (h) CRI : Morethan 80 (j) CRCA pre coated housing. (k) LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection minimum 3 kV. (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement energy efficient LED street light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications and all as directed by Engr-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) CRI : Morethan 80 and CCT : 5700 K. (g) IP rating : IP66. (h) IK rating : Minimum IK07 (j) Built in potted LED Driver of the make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection 10 kV (inbuilt + extended) (m) Lens - High Efficiency wide angle lens. (n) BIS Approved fixtures and driver (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement surface mounting Square LED fitting 18 W, with opal type polycarbonate diffuser including all acessories like connectors, Driver complete with connection with 2 core flexible copper cable 23/0.00076 from ceiling rose to light fitting etc including removing of old existing light fitting any type fitting all as directed by Engr-in-Charge and with following specifications: (a) Size = 225 mm x225mm (b) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (c) Input Voltage range : 140 to 270 volts (d) Temp operating range : Minus 10°C to Plus 45°C (e) Power factor : Minimum 0.95 (f) THD : Max10%. (g) CRI : Morethan 80 and CCT : 6500 K (h) IP rating : IP20 (j) IK rating : Minimum IK07 (k) Built in potted LED Driver of the make as of the luminaire. (l) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) (m) Surge protection minimum 2.5 kV. (n) HOUSING: DIE CAST ALUMINIUM (o) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer.

Supply and fixing in replacement surface mounting Round LED fitting 18 W, with opal type polycarbonate diffuser including all acessories like connectors, Driver complete with connection with 2 core flexible copper cable 23/0.00076 from ceiling rose to light fitting etc including removing of old existing light fitting any type fitting all as directed by Engr-in-Charge and with following specifications: (a) Size = 225 mm dia (b) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (c) Input Voltage range : 140 to 270 volts (d) Temp operating range : Minus 10°C to Plus 45°C (e) Power factor : Minimum 0.95 (f) THD : Max10%. (g) CRI : Morethan 80 and CCT : 6500 K (h) IP rating : IP20 (j) IK rating : Minimum IK07 (k) Built in potted LED Driver of the make as of the luminaire. (l) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) (m) Surge protection minimum 2.5 kV. (n) HOUSING: DIE CAST ALUMINIUM (o) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer.

Supply and fixing in replacement of LED lamp minimum 3 star rated 9W LED B-22 base complete all as specified and directed by Engr-in-Charge with following specifications (a) Lumen system efficacy of lamp should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 45°C (d) Power factor : Minimum 0.90 (e) CRI : Morethan 80

Supply and fixing in replacement energy efficient LED street light fitting of 45W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications and all as directed by Engr-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) CRI : Morethan 80 and CCT : 5700 K. (g) IP rating : IP66. (h) IK rating : Minimum IK07 (j) Built in potted LED Driver of the make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection 10 kV (inbuilt + extended) (m) Lens - High Efficiency wide angle lens. (n) BIS Approved fixtures and driver (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement energy efficient LED street light fitting of 60W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications and all as directed by Engr-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) CRI : Morethan 80 and CCT : 5700 K. (g) IP rating : IP66. (h) IK rating : Minimum IK07 (j) Built in potted LED Driver of the make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection 10 kV (inbuilt + extended) (m) Lens - High Efficiency wide angle lens. (n) BIS Approved fixtures and driver (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement LED Post top light fitting 40 watt, decorative design, Glare-free and better uniformity, complete fitting with all accessories and LED lamp, fixing on existing GI pipe system or as directed by Engineer-in-charge including making electric connections, complete all as specified and as directed by Engineer-in-charge and as per the following specifications:- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) CRI : Morethan 80 and CCT : 5700 K. (g) IP rating : IP65. (h) IK rating : Minimum IK07 (j) Pressure die cast aluminium alloy housing and front cover clear toughned glass (k) Built in potted LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection 10 kV (inbuilt + extended) (n) Lens - High Efficiency wide angle lens. (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement of very high efficiency round highbay LED light fittings of 80 W capacity complete fitting with the following specifications:- (a) Lumen system efficacy of luminaire should be minimum 105 Lumen/watt. (b) Input Voltage range:140 to 270 volts. (c) Temp operating range: minus 10°C to plus 50°C (d) Power factor : Minimum 0.95. (e) THD : Maximum 10%. (f) CRI : Morethan 80 and CCT : 5700 K. (g) IP rating: Minimum IP66. (h) IK rating: Minimum IK07 (j) Epoxy powder coated pressure die cast aluminium alloy housing and front cover clear toughned glass. (k) Build in potted LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protection viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection 10 kV (inbuilt + extended) (n) Lens :- High efficiency wide angle lens (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Supply and fixing in replacement of very high efficiency round highbay LED light fittings of 120 W capacity complete fitting with the following specifications:- (a) Lumen system efficacy of luminaire should be minimum 105 Lumen/watt. (b) Input Voltage range:140 to 270 volts. (c) Temp operating range: minus 10°C to plus 50°C (d) Power factor : Minimum 0.95. (e) THD : Maximum 10%. (f) CRI : Morethan 80 and CCT : 5700 K. (g) IP rating: Minimum IP66. (h) IK rating: Minimum IK07 (j) Epoxy powder coated pressure die cast aluminium alloy housing and front cover clear toughned glass. (k) Build in potted LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protection viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection 10 kV (inbuilt + extended) (n) Lens :- High efficiency wide angle lens (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)

Note for item No. 1 to 13 :- (a) Contractor shall submit LM-79 and LM - 80 reports obtained from manufacturers (refer Sch A' note ). (b) Contractor shall to furnish a Replacement warranty from manufacturer of five years for LED light fittings complete including lamps from the date of completion of CA. The product will be replaced including taking down and refixing new luminaire free of cost in the following cases:- (i) Manfacturing defects. (ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or Lux at 1m) below 90% of clamied values of lumens (or lux at 1m) of the LED/Luminaries.

Note for item No. 1 to 13 (Contd...) :- (c) All LED light/luminare must meet the provisions laid down in IS -16101, 16102 Part - I/II , 16103 Part -I, 16104,16105, 16106, 16108/2012 and 15885 Part-II Section 13. (d) Minor items required for completion of job are included in overall cost quoted by Contractor. Nothing extra shall be payable on this account. (e) Pre-dispatch inspection of fittings shall be carried out by rep of Accepting officer.

Supply & fixing in replacement of Three-Phase load of 5kW with 3 Nos Contactors, 3 Nos Incoming MCBs & 3 Nos Outgoing MCBs 16 - 25 Amps each & circuit wiring (Copper) of min. 10 sq.mm for automatic Street Light control Switch using Infrared Sensor based NATURE SWITCH for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required illuminance Level for Switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. The Sensor along with suitable Power Contactor(s) and Incoming- Outgoing MCBs should be enclosed in a pole/wall mountable Rust Proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure with Hinged Lid confirming to IP66 protection class2. The circuit should also have provision for manual operation (i.e. Sensor By-pass option). mounted on existing pole/panel with suitable size clamps of size 32 x 6 mm flat iron bolts nuts and washers duly painted with metallic painting (Including taking down of old/unserviceable timer switch) complete all as directed by Engg-in-charge. MAKE:SWADEEP-66-5KW3P of M/S Healer Entrerprises or equivalent model in any of makes as per list of makes given in tender documents.

Supply & fixing in replacement of Single Phase load of 3kW with Contactor, Incoming MCB & Outgoing MCB rating of 20 - 25 Amps & main load circuit wiring (Copper) of min. 10 sq.mm for automatic Street Light control Switch using Infrared Sensor based NATURE SWITCH for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required illuminance Level for Switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. The Sensor along with suitable Power Contactor(s) and Incoming- Outgoing MCBs should be enclosed in a pole/wall mountable Rust Proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure with Hinged Lid confirming to IP66 protection class2. The circuit should also have provision for manual operation (i.e. Sensor By-pass option). mounted on existing pole/panel with suitable size clamps of size 32 x 6 mm flat iron bolts nuts and washers duly painted with metallic painting (Including taking down of old/unserviceable timer switch) complete all as directed by Engg-in-charge. MAKE:SWADEEP-66-3KW1P of M/S Healer Entrerprises or equivalent model in any of makes as per list of makes given in tender documents.

Supply and fixing in replacement 1100 Volt grade FRLS, PVC insulated, stranded copper conductor cable sheathed 1.5 Sqmm flat three core for connection for street light fitting with over head lines / service connection including taking down of old/unserviceable cable of any size complete all as directed by Engg-in-charge.

Taking down of old mounting arrangement for street light of any size, supply and fixing of new mounting arrangement made out of GI pipe light grade of size 32 mm to 45 mm as recommemed by manufacturer and of length not less than 1.5 mtr long including flat MS clamp of size not less than 50 mm x 50 mm x 3 mm all as directed by Engg-in-charge.

Leo Air and Power Solution pvt Ltd.

M/s Azure Infrastructure Construction Co.

M/s Kataria Construction Company

I.S. Trading Co.

M/s Khanna Enterprises

JAY BEE Industries