Loading…
Loading…
Tender Value
₹3.6 Cr
EMD Value
₹3.3 L
Closing Date
12 Jan 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
WORKS
24 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover o f V/N crores; where V= Advertised value of the tender in crores of Rupees and N= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.The tenderers shall submit requisite information as per Annexure-VIB, long with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) (v) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip].
a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Tenderer shall carefully read clause No. 10 including clause no. 10.1 to 10.5 of IRGCC April 2022.
The total value of similar nature of work completed during the qualifying period and not the payments received within qualifying period alone, shall be considered. In case, final Bill of similar nature of work has not been passed and final measurements have not been recorded, the paid amount including statutory deductions will be considered. If final measurements have been recorded and work has been completed with negative variation, then also the paid amount including statutory deductions will be considered. However, if final measurements have been recorded and work has been completed with positive variation but variation has not been sanctioned, original agreement value or last sanctioned agreement value whichever is lower shall be considered for judging eligibility
In case JV firms are allowed to participate, Technical Eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.1 of J.V. guide lines of IRSGCC April-2022 [read with up to date correction slip].
The value of work completed will not include the cost of any materials issued free of cost by the Railway/ Department concerned. Price Variation amount, if any; if indicated / incorporated in the experience certificate will also be considered towards eligibility.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates
The work experience certificate shall be in the name and style of the 1.5.1 tenderer participating or as per provisions under Clause 17.15 of GCC April-2022 for JV Firm, if eligible to participate.
The work experience certificate shall be issued by an officer not below the rank of JA Grade or Bill passing Officer in Railways and Bill passing Officer/Executive In-charge of work in other Govt. / Govt. bodies / PSUs. The certificate should bear the signature and seal of the issuing officer, name of the department etc.In case tenderer submits work experience 1.5.2 certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- a)Any Civil Engineering work having RCC Component. and b)Steel Structure Work. Tenderer should have valid Electrical Contractor's License in his/their name or he should give an undertaking that he will engage capable agencies for Electrical work who has the valid Electrical Contractor's license in his/their own name. Note: Single/Separate completed work of minimum required value shall be considered for fulfilment of Technical Eligibility Criteria for above two different components (RCC Component (a) & Steel Structure Work Component (b)) as per para 10.1 of IRSGCC 2022.
69 conditions · 1 needing a document upload
TENDER SHALL BE REJECTED if it is not accompanied by the following
In case of tender for Ballast supply - Ballast test certificate
Bid Security deposited through IREPS e-payment or as per provisions under Clause 5 (2) Part-I of GCC April 2022.
In case of Partnership firm: The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 1.2.2 only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (No Technical credentials are required for tenders having advertised value up to Rs 50 lakh).
Submission of Certificate(s) in support of Financial Eligibility (No Financial credentials are required for tenders having advertised value up to Rs 50 lakh).
IN CASE THE TENDER is Partnership firm/ JOINT Venture firm (JV)/ LLP A copy of certificate to be submitted/uploaded by tenderer as per format given at annexure -v of IRGCC 2022.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] A notarized copy of Partnership deed or a copy of the Partnership deed registered with the Registrar. [ii] A notarized or registered Power of Attorney (duly registered as per prevailing law) in favour of an 1.7.1 individual to sign the tender documents and create liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered). [iv] All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) A copy of LLP Agreement, (ii) A copy of Certificate of Incorporation; and (iii) A copy of Power of Attorney/Authorization issued by the LLP Firm in favour of the individual to sign the 1.7.2 tender on behalf of the LLP Firm and create liability against the Firm. (iv) Copy of PAN number of the LLP Firm. [v] All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
In case the Tenderer is a Company registered under Companies Act-2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of 1.7.3 Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company. and (v) All other documents in terms Para 10 of the Tender Form (Second Sheet) above
In case the Tenderer is a Registered Society & Registered Trust: (i) A copy of the Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed; (iii) A copy of Power of Attorney in favour of the individual to sign the tender 1.7.4 documents and create liability against the Society/Trust. And (iv) A copy of Rules and Regulations of the society (v) Copy of PAN number of the Society/Trust. (vi) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed: (i) A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a 1.8.1 Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted: (i) A notarized copy of the Partnership Deed or a copy of the partnership deed registered with the Registrar. (ii)A copy of consent of all the 1.8.2 partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper. (iii) A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted: (i) A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement. (ii) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. 1.8.3 (iii) A copy of Certificate of Incorporation. (iv) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company
In case one or more members of the JV is/are LLP firm/s, the following documents shall be submitted: (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of resolution passed by partners of LLP firm, permitting 1.8.4 the Firm to enter into a JV agreement. (iv) A copy of Authorization /copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP.
In case one or more members of the JV is/are Society/s or Trust/s, the following documents shall be submitted: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of 1.8.5 Association of Society/Trust Deed. (iii) A copy of Rules & Regulations of the Society. (iv) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.16 of Part-I of GCC April 2022. [in the format attached in - Documents]
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017, as amended from time to time, shall be followed for consideration of tenders (A) for procurement order of value less than Rs. 10 crores: self- certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B)For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
UBLS upgradation of storage infrastructure facility in MSD ward No 71 72 82 and Other Miscellaneous works including Electrical works Maintenance period-Three 03 years
05-XEN-WS-UBLS-MSD-UM~SWR
05-XEN-WS-UBLS-MSD-UM
Open
Works - General
10 Months
Dharwad, Karnataka
₹0
₹3.3 L
12 Jan 2026
12 Dec 2025
29 Dec 2025
68 items across 3 schedules · ₹4,37,68,550.12 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 5km | cum | 1650 | 217.16 | 3,58,314 |
| 2 | 2km | cum | 250 | 203.98 | 50,995 |
| 3 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 350 | 187.16 | 65,506 |
| 4 | All kinds of soil. | cum | 500 | 286.85 | 1,43,425 |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 625 | 6,833.4 | 42,70,875 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 500 | 307.95 | 1,53,975 |
| 7 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 60000 | 89.65 | 53,79,000 |
| 8 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 1050 | 8,825.35 | 92,66,617.5 |
| 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 30580 | 111.95 | 34,23,431 |
| 10 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover | Sqm | 100 | 3,008.8 | 3,00,880 |
| 11 | Providing and fixing ball bearing for rolling shutters. | Each | 50 | 424.2 | 21,210 |
| 12 | Exceeding 10.00 sqm and upto 16.80 sqm in the area | Sqm | 150 | 1,108.7 | 1,66,305 |
| 13 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 1600 | 88.5 | 1,41,600 |
| 14 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | Sqm | 3125 | 855.9 | 26,74,687.5 |
| 15 | Size of Tile 600x600 mm | Sqm | 100 | 1,416.65 | 1,41,665 |
| 16 | 0.63 mm thick with zinc coating not less than 275 gm/ sqm | Sqm | 2000 | 978 | 19,56,000 |
| 17 | 0.80 mm thick with zinc coating not less than 275 gm/sqm | Metre | 200 | 822.15 | 1,64,430 |
| 18 | 1.60 mm thick with zinc coating not less than 350 gm/sqm | Metre | 300 | 1,370.4 | 4,11,120 |
| 19 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. | Sqm | 500 | 462.1 | 2,31,050 |
| 20 | Flat surfaces | Sqm | 200 | 1,421.25 | 2,84,250 |
| 21 | Crimp curve | Sqm | 100 | 422.5 | 42,250 |
| 22 | 1:6 (1 cement: 6 fine sand) | Sqm | 875 | 324.3 | 2,83,762.5 |
| 23 | Two or more coats on new work | Sqm | 2500 | 137.85 | 3,44,625 |
| 24 | Two or more coats on new work | Sqm | 550 | 131.45 | 72,297.5 |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 2500 | 123.85 | 3,09,625 |
| 26 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm | 875 | 64.45 | 56,393.75 |
| 27 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 625 | 2,007.1 | 12,54,437.5 |
| 28 | In lime mortar | cum | 100 | 954.8 | 95,480 |
| 29 | Of sectional area 40 square centimetres and above | cum | 150 | 3,674.5 | 5,51,175 |
| 30 | G.S. Sheet | Sqm | 2500 | 136 | 3,40,000 |
| 31 | With G.I. barbed wire | Metre | 5000 | 19.6 | 98,000 |
| 32 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | Kg | 2500 | 99.95 | 2,49,875 |
| 33 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). | cum | 150 | 8,613.55 | 12,92,032.5 |
| 34 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 500 | 433.95 | 2,16,975 |
| 35 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 100 | 531.8 | 53,180 |
| 36 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | Sqm | 200 | 965.1 | 1,93,020 |
| 37 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 100 | 1,325.55 | 1,32,555 |
| 38 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 155 | 8,086.6 | 12,53,423 |
| Schedule total | ₹3,64,44,442.75 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentsMSD.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .