REPAIR/ CLEANING OF SEWAGE LINE, MANHOLE AND OTHER MISC WORKS IN DLRL AT KANCHANBAGH, HYDERABAD UNDER AGE B/R-III SECUNDERABAD

Amount

Cleaning of septic tank of 10 to 25 users by removing sludge/waste material (night soil) inside the manhole, washing with water and disposing off sludge/waste material from site in a hygienic manner complete all as directed. .

Cleaning of septic tank of 50 to 100 users by removing sludge/waste material (night soil) inside the manhole, washing with water and disposing off sludge/waste material from site in a hygienic manner complete all as directed.

Cleaning of septic tank of 1000 users by removing sludge/waste material (night soil) inside the manhole, washing with water and disposing off sludge/waste material from site in a hygienic manner complete all as directed.

Cleaning and removing all scale and dirt etc from sevice water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs and from mouths of circulating pipes,Date of cleaning to be written in synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYYY etc complete all as directed.

Cleaning and removing all scale and dirt etc from sevice water tank of capacity exceeding 1000 ltrs but not exceeding 2000 ltrs and from mouths of circulating pipes,Date of cleaning to be written in synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYYY etc complete all as directed.

Cleaning surfaces of RCC and AC sheet roofing RCC chajjah , sides of parapet walls by uprooting the unwanted vegetation and scrapping with steel wire brush ,watering and sweeping including taking down the leonine trees over roofs and removing the derbis to a distance exc 250m and n.exc.,500m including provision of safety measures to labour complete all as directed.

Cleaning of drains by excavating of the filled earth, vegetation and all forged material, average width 45 cm & depth 50cm and removing the excavated material to a distance exc. 50m and not exc. 250m complete all as directed

Excavation in trenches, in soft/loose soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out complete all as directed.

S & F Salt glazed stone ware drain pipe of 150 mm bore, grade 'A', laid in trenches to required gradient and jointed in cement mortar 1:1 including testing after the pipes are laid over plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as concrete bed to drain pipes including packing under, and haunching against the sides of pipes including demolition of old pipes alongwith concrete bed and haunching complete all as directed.

Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25cm thick using soil complete all as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as directed.

M&L for Cleaning of all blockage of any type of sewage line i.e, branch sewer line, main sewer line etc., by rodding and cleaning/disludging of manholes of any section and depth mechanically using super jetting machine or by suitable means as ordered and making the sewage line functional, cleaning the trap,water closet,soil, waste/vent pipe,gully traps upto final drop out let into first manhole/septic tanks and removing the sludge/foreign material and depositing the same outside the MOD land complete all as directed. Tentative quantities required to be cleaned per month shall be as under:- (a) 100mm bore sewage line -50Metre (b) 150mm bore sewage line -80Metre (c) 200mm bore sewage line -110 metre (d) Manholes of any size - 50 Nos (e) Trap/water closet -75 Nos The above mentioned quantities may be varied at the descretion of Engineer- in -charge as per requirement and nothing extra shall be claimed on this account.

Note :- (i) Adequate precautions and safely measures shall be taken while working under foul conditions and cost for the same shall be deemed to be included in the quoted rate. (ii) Contractor or his representative shall collect the complaints from complaint cell in job cards (as per specimen attached as Annex ‘A’) from the concerned JE on all days and the complaint shall be attended & rectified by the contractor on priority depending on the nature & urgency of complaint.The job card shall be returned to JE on completion of the complaint and duly signed by the User/Occupant . If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis and rectify within a day, a penal recovery of Rs.2500/day complaint shall be recovered from the RAR/bill due to contractor.

M&L for factory made percast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) manholes or cover slabs including necessary form work and reinforcement, set in CM 1:6 inculding demolition of existing reinforced cement concrete cover slabs complete all as directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in CM 1:4 including demolition of existing old brick masonry complete all as directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement complete all as directed.

M&L for preparation of new plastered surface of wall including cornices, pilasters and applying two coats of oil bound distemper over a coat of primer complete all as directed

M & L for preparing new surfaces of wall, plastered or unplastered and applying two coats of cement base paint over a coat of primer complete all as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of white wash on ceilings complete all as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as directed.

M & L for preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as directed.

M&L for preparation of old painted steel/iron surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted wooden surafces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete all as specified. Make : NAVEEN/SPARTEK/NITCO

M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile of any descrption complete all as directed. Make : NAVEEN/SPARTEK/NITCO

M&L for 75mm thick plain cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) as in foot path including necessary form work and finishing the exposed surface fair and even including demolition of existing concrete complete all as directed

S&F vitrified tiles 10mm thick light shade (Square/rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with existing floor over and including 15mm thick screed bed in cement mortar (1:6), including dismantling of old floor tile along with screed bed complete all as directed.

All as per ser item No. 26 here-in-before but on vertical surfaces such as skirting over 10 mm thick backing coat in CM 1:4 on fair faces of brick/concrete surfaces including dismantling old wall tiles along with backing coat complete all as directed.

S&F vitrified tiles 10mm thick dark shade (Square/rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with existing floor, over and including 15mm thick screed bed in cement mortar (1:6), including dismantling old floor tile along with screed bed complete all as directed.

All as per ser item No 28 here-in-before but on vertical surfaces such as skirting over 10 mm thick backing coat in CM 1:4 on fair faces of brick/concrete surfaces, including dismantling old wall tiles along with backing coat complete all as directed.

M&L for 20mm thick polished granite stone (of any type) work (table rubbed and polished) in steps, jambs,dados, pillars, window cills, cooking platforms and like etc. including making suitable holes for tucking in oval shape WHB in the granite slab including cutting grooves and nosing, tin oxide polish to top and edges, 15mm thick screed bed in CM 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including taking down old granite stone along with screed bed complete all as directed.

M/L for 75 mm thick plain cement concrete 1:3:6, type C-2, (using 40 mm graded stone aggregate) as in plinth protection, finished even and smooth including demolition of existing plinth protection complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 15mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 20mm dia GI tubig, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 25mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.

S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed

M&L for white rotational moulded triple layered polythene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs including dismantling existing damaged PVC tank complete all as directed.

M&L for white rotational moulded triple layered polythene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including dismantling existing damaged PVC tank complete all as directed.

S&F in repairs ball brass valves of 20 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as directed.

S & F in repairs ball brass valves of 25 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as directed.

S & F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

S & F in repairs 25 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.

S&F in repair stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.

S&F in repair push type angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl 32 mm dia PTMT waste coupling, PVC waste pipe incl brackets complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified.

S&F in repairs vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as specified. Note :- Demolition of tiles/concrete, concreting required for setting trap and making good to floor shall be deemed to included in the quoted rate

S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed

S&F in repairs plastic water closet seat, white/colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devise complete all as directed.

S&F in repairs Vitreous China urinal, half stall type of size 46x30x71 cm, coloured complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including CP brass urinal spreader and CP connection of suitable length as per manufacturer,s instructions including necessary connection to flush pipe and 32 mm dia waste pipe complete all as specified and directed. Make :Cat part No 96010 of Hindware or equivalent in Perryware

S&F in repairs Urinal sensor of ivory colour complete all as directed. Make:- Hindware cat No 6007 or equivalent.

S&F in repairs first quality venetian blinds (vertical type) of 100mm wide straps with all fittings complete all as directed.

Taking down of aluminum door shutters of any description and of any size for replacing of floor spring of one No for aluminum door with heavy duty,pivot only floor hing,glazing clips,rubber beading,rubber gasket and re-fixing the door after easing and perfectly closing /opening by using necessary alignment for functioning and making good to the damaged portions complete all as directed.

S&F in repair 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed in aluminium partion complete all as directed. Make : NOVAPAN/SWASTICK/KITPLY

S&F in repairs 100mm stainless steel butt hinges fixed to shutters with stainless steel screws complete all as directed

S&F in repairs 100mm MS butt hinges, medium weight, cold rolled mild steel complete all as directed

S&F in repairs 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as directed.

S&F in repairs 200mm size aluminium anodized, barrel tower bolts of extruded section complete all as directed Make : CROWN/JYOTHI/PRESTIGE

S&F in repairs 150 mm size aluminum handle fabricated type anodized complete all as directed. Make : CROWN/JYOTHI/PRESTIGE

S&F in repairs 200 mm size aluminum handle fabricated type anodized complete all as directed. Make : CROWN/JYOTHI/PRESTIGE

S&F in repairs 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as directed.

S&F in repairs floor door stopper 150 mm size of aluminium alloy body and tongue anodized with hard drawn steel spring complete all as directed.

S&F in repairs brass, 4 levers, mortice lock, vertical type, size 100mm door lock to match with existing aluminum /wooden doors standard quality complete all as directed. Make: GODREJ

S&F aluminium (extruded section body) door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 KG and fixed including taking out old unservicable door closer complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wood/steel frame including punching or drilling out old glazing pins/spring clips and supply and fix 3mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as directed. Make : Modiguard/ saint Gobain

Hacking out old broken glass (any thickness, size, quality or description) from wood/steel frame including punching or drilling out old glazing pins/spring clips and supply and fix 3mm thick plain sheet glass and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as directed. Make : Modiguard/ saint Gobain

Hacking out old broken glass (any thickness, size, quality or description) from wood/steel frame including punching or drilling out old glazing pins/spring clips and supply and fix 5.50 mm thick plain sheet glassand glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as directed. Make : Modiguard/ saint Gobain

Securing glass of size not exceeding 0.5sqm in each pane in existing steel or wooden frame of window/ventilator at any height with putty including removing of old putty complete all as directed.

S&F two track aluminum sliding window of standard sections of 1.5m thick powder coated of approved colour including rubber beading, 5mm thick plain sheet glass and powder coated aluminum grill made of 8mm dia aluminium bars, size of mesh 50mm by 50mm fixed together with aluminium U beading all round the grill including taking down old unserviceable window of any type complete all as directed.

S&F powder coated glazed aluminium door using 101.6mm x44.45mm x 2.00mm chowkhats and 85mmx44.45mm x 2 mm section vertical style and 101.6mm x44.45mm x2mm rails mounted on floor spring and glazed with 5 mm thick tinted glass or 12 mm thick PLPB fixed with rubber beading/gasket and powder coated aluminiun beading and one mortice lock, two powder coated alum door handle D type 200 mm long, two powder coated alum tower bolt of 200 mm length for each leaf including taking down old unserviceable door of any type complete all as directed.

S&F 12mm thick Toughened frosted/tinted glass as in aluminium partitions/doors including necessary rubber neoprene packing and fixing with old aluminium snap beadings and screws, fixed in position complete in all respect incl taking down broken glass of any description and in any position complete all as specified. Make : Modiguard/ saint Gobain

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, properly rolled on glass panes without any wrinkle including removal of existing old solar control film from windows/doors complete all as directed. Make : GARWARE OR EQUIVALENT

S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks as in panels of wire gauzed shutter complete all as specified and directed.

Raking out joints /pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar and M&L raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought up to courses complete all as specified and directed.

Raking out joints /pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar and M&L flush pointing in CM 1:4 to random or polygonal rubble,uncoursed or brought up to courses complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and in any position complete all as specified.

S&F mild steel works as in posts, horns and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S&F in repairs, galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain-ing bolts,including,securing or trying at crossings with and provisionsof galvanised mild steel wire, staples or steel pins, etc,. as directed( each line wire to be measured) complete all as specified.

S&F in repairs Razor concertina coil, 610mm dia (50 spirals per coil), weight 8kg approximately (±5%), expandable 6-8 metre, consisting of 2.6mm dia heavy galvanised high tensile spring steel wire as per IS-4454, complete all as specified and directed.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved an colour having tensile strength of 550 Mpa as in roof covering/wall cladding etc, fixed with self tapping screws including taking down old sheeting of any description complete all as specified

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165de E-165 complete all as specified.

M&L Prepration of new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

S&F in repairs Multicolor double layered black out fabric roller zebra blinds horizontal type including hanging mechanism water resistant, UV protection for window etc fixed complete all as directed. Make: Vista/Levador/Amar

M&L 20 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces in patches as in facias, fins, chajjas, parapets, roofs, window cills and similar locations, finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified including taking down damaged cement plaster. ( SBR latex shall be deemed to be included in quoted rates) Note: The work shall be carried out for three storeyed building and necassary scaffolding and T&P shall be deemed to be inclusive in rates quoted by contractor.

S&F 4mm thick aluminium composite panel (ACP) cladding metallic finish in combination of copper and steel grey sheets matching with existing colour of ACP cladding and frame work with section size using 50x25x2mm thick aluminium sections and joints sealed with exterior grade silicon sealant all as per manufacturer instruction fixed to walls including taking down of old damaged cladding of any description complete all as specified.

M&L for providing reinforced Cement Concrete Type B1, 1:2:4 using (20mm graded curshed stone aggregate) as in beams, bands and lintels over 1.5m span including demolition damaged reinforced cement concrete complete all as specified.

M&L for use & waste of form work to sides and soffits of floor and roof beams, lintels etc, for rough finished surfaces of concrete, complete all as specified.

S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified.

S&F mild steel TMT bars 5 dia and over upto and including 10 mm dia, as in stirrups spacers links etc quality conforming to TMT bars complete all as specified.

M&L for false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed powder coated white consisting of main T-runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall / partitions on a W- Profile wall section made of Pre-coated galvanized steel of dimension 3.0mm long x (15mm +10mm)x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI Suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia GI hangers and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, at all height including taking down old false ceiling complete all as directed. Note: The work shall be carried out in building of height 6 to 8 meter. The quoted rates by contractor shall be deemed to be inclusive of necessary scaffolding and T&P as per requirement at site.

Repairs to leakage/seepage of joints in wall cladding of any type and filling joints with exterior grade silicon sealent as per manufacturer,s instructions and making joints complete leakage proof including raking out defective sealent from joints. The quoted rates by contractor deemed to be inclusive of necessary scaffolding for working upto four storeyed building.

M/s K L M INFRATECH

Sai construction & services

sanjar enterprises

sri vishnu enterprises