Interior furniture and allied Work at third floor of Department of Physical Education in Eravati Karve Social Science Complex at Savitribai Phule Pune University.

Removing Partition -( 1.80 x 2.40 ) Door Opening to be Create As per Drawing

Repairing of Existing Flooring Providing and laying flooring with 600mm x 600mm Vitrified Tiles of approved make and sample in pattern as per detailed drawings on up to 100mm thick bed of cement mortar 1:6 , giving necessary slopes, cleaning joints and filling joints with pigmented additives to match shade of the tile,cutout for junction box etc. complete.. 75mm high vitrified tile which are to damaged Existing tiles should be match

Providing and laying coloured / plain Dado Tiles of 600 x 300 mm size of rough finish approved make and about 5 to 6 mm thick in required position level and slope, laid on a bed of C.M. (1:4) including all filling & compaction for sunk areas, neat cement float, filling joints with matching coloured cement including all specials like round, edge tiles, cutting tiles if necessary, curing and cleaning, surface protection by laying POP with gunny bags over flooring and cleaning with appropriate acid wash as required etc. complete. Tile Supply By Owner- system Lab above Sink Platform.

Providing and fixing Gypsum False Ceiling of India Gypsum make which includes G.I. Perimeter Channels of size 0.55mm thick (having One Flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall / partition with the help of Nylon sleeves and screws at 610mm centres. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the soffit at 1220mm centres with ceiling angle of width 25mm X 10mm X 0.55mm thick fixed to soffit with G.I. cleat and steel expansion fasteners. Ceiling section of 0.55mm thick having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457 mm centres.

Providing and fixing modular ceiling systems with mineral fibre board ceiling tiles as per following specifications. Rate to include all fastening accessories with approved finishes. Ceiling tiles shall be approved make TEGULAR EDGE tiles, of size (600mm x 600mm),with approved colour. Tile shall render a NRC level of 0.7. NRC Suspension system shall be manufacturer specific stitched exposed grid system with 15 mm wide T-section flanges. Installation to comprise of main runners spaced at 1200mm centres securely fixed to the structural soffit by approved hangers at 1200mm maximum centres & not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall.

Supply and installation of Techno Ceiling As per Design including Carrier as per standard colour etc. Complete as per Design Training Room

Providing and erecting 75MM thk partition with 50x50mm Aluminium Frame vertical and horizontal member with 8mm ply on both side and 4mm veneer one side with melamine polish and Acrylic Emulsion paint finished another side as per detail etc. complete. Including aluminium framework of section 50mmX35mm screw fixed across @ 600mm C/C with 6mm ply on one side above the false ceiling right up to the bottom of RCC slab, Partition only up to false ceiling bottom shall be measured and paid for under this item. (mode of measurement will be clear visible partitions) Cost also to include necessary 12mm ply band support for all type of conduit and metal back boxes of switchboard, data, ]etc. complete as per detail drawing. The outer gypsum skin shall be stopped 25mm above false ceiling in that area, the partition shall be single skin gypsum partition above false ceiling up to bottom of slab. Partition only up to false ceiling bottom shall be measured and paid for under this item. However cost to be inclusive of framework and single skin gypsum right up to bottom of RCC slab. Necessary cutouts shall be provided for taking of supply and return air ducts/openings which shall be neatly finished after fixing of ducts thereby leaving no gaps. Note all GI sections to be standard India gypsum sections and should have a hologram of the same.The rate to include glass wool insulation of density 24 kg per cum, 50mm thick of UP Twega make wrapped in RP tissues as per manufacturer's specifications.

Providing and fixing one side Gypsum partition which includes one layers of tapered edge 12.5mm thk gypboard (conforming to IS 2095-1982 & 2542-1981) screw fixed with 25mm dry wall screw of 34 mm and another flange of of 36 mm made of GI steel) placed at 610mm centre to centre in 50mm floor and ceiling channel (0.55mm thk having equal flanges of 32mm made of GI steel) with joints staggered on each layer to avoid through joints. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper tape and two coats of drywall top coat suitable for gypboard (as per recommended practice of India Gypsum or equivalent). Rate shall be inclusive Gypsum edge guard on both side of partition with staggered joints.The outer gypsum skin shall be stopped 25mm above false ceiling in that area, the partition shall be single skin gypsum partition above false ceiling up to bottom of slab. Partition only up to false ceiling bottom shall be measured and paid for under this item. However cost to be inclusive of framework and single skin gypsum right up to bottom of RCC slab. Necessary cutouts shall be provided for taking of supply and return air ducts/openings which shall be neatly finished after fixing of ducts thereby leaving no gaps. Note all GI sections to be standard India gypsum sections and should have a hologram of the same.

Providing and fixing full height glass partition which include 12mm thick clear toughened glass of approved make supported on glass rail as specified on dwg. including teak wood framework of section 50mmX35mm screw fixed across @ 600mm C/C with 6mm ply on one side above the glass panel right up to the bottom of RCC slab, S.S. brush finish twinpro glazing profile of ozone/equivalent make at the bottom fixed on the floor, cost

should include closing & Cost to be inclusive of joints between glass to be filled with clear sealant etc. complete. Only glass panel shall be measured and paid for under this item.

Providing and erecting 75mm thk partition with aluminium section 50mm x 50mm of size and 18 gauge instead of teakwood members vertical and horizontal member with 6mm ply on both side and 4mm MDF on both side and Lustre paint finished, including grooves as per detail etc. complete including teak wood framework of section 50mmX35mm screw fixed across @ 600mm C/C with 6mm ply on one side above the false ceiling right up to the bottom of RCC slab, Partition only up to false ceiling bottom shall be measured and paid for under this item. (mode of measurement will be clear visible partitions)

Providing and fixing plywood panelling, with 12mm thick commercial ply of approved make fixed in line and level, finished in approved laminate with necessary beading matching the laminate shade or as directed. Cost of Laminate Rs……./Smt. Training Room

Providing and fixing 32 mm Flush Door double shutter tower anchor including Ply Door Frame with Laminated Finish ,mortice lock and handle, door closer etc. all as per detailed drawings ( 1500 x 2400 ) System Lab

Providing and fixing single shutter glazed door with 12mm thick toughened glass of OZONE / DORMA make patch fitting as shown in the drawings, handle, floor spring, locks etc. all as per detailed drawings .office 1200x2400 meeting room

Providing and fixing single shutter glazed door with 12mm thick toughened glass of OZONE / DORMA make patch fitting as shown in the drawings, handle, floor spring, locks etc. all as per detailed drawings .office 900 x 2400 Faculty cabin - 3Nos Office entrance

Providing and fixing on 3/4" S.S. Stud ,12 mm Frosted glass with crystal edge Polish ,spray painting on frosting side as per colour section as per approved sample etc. complete. 900 x 600 x 4 Nos - Training room 1 no , meeting room 1 no , lab - 2 nos

Providing and fixing 3 M Film on Glass partition & Glass Doors as per design

Providing & Fixing in position, Techno acoustic panels 10 mm, on Wood-wool panels, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.

Vista make Roller blinds 2100 x 1500x 6 Nos

Providing & Fixing Cabin Table 1500 x 600 mm long including pedestal unit 450x400x600 2" S.S. Foot rest with Laminated Finish , side table 900 x 450 x 750 ,including all required accessories, fixtures with Laminate finish etc. complete. 3 faculty room As per Architects Design.

Providing & fixing 18 mm ply frame with pedestal unit 450x400x600 with laminate finished Linear Workstation tables including all required accessories, fixtures etc. complete, as per detailed drawings. (1200 x 600) x 4 Nos

Providing & fixing 18 mm ply frame with laminated finished Meeting room tables 8 seating including all required accessories, fixtures etc. complete, as per detailed drawings. (3050 x 900)

Providing & fixing Table 1500x750 with pedestal unit 450x400x600 18mm ply shutter with Laminated Finish including Necessary Hardware etc. Complete. Training room

Staff Chair &Visitor --Supply & installation Executive Chair HB, Back Black Mesh, Seat Black Plain Fabric, Adjustable PU Arms, Tilting Mechanism, Crome Base, Nylon Castors, Moulded Cushioned Seat.etc. complete. 6+3+1

2 FAS-Oscar MB (Meeting Room Chair) Revolving Chair MB, Back Black Mesh, Seat Black Plain Fabric, Adjustable PU Arms, Push Back Mechanism, Crome Base, Nylon Castors, Moulded Cushioned Seat. 8 Nos Meeting room

Training Room chairs - supply & Installation MB, Back Black Mesh, Seat Black Plain Fabric, Adjustable PU Arms, Crome Base four Leg, Cushioned Seat. With Pre Laminated Writing Pad + 30 Nos

Stools -Lab Stools -Supply SS stools of Dia 450mm .M.S. Pipe Frame etc. complete.

Supplying & installing Pop up Box of Logic make-cable Cuby LC-402 with 2x universal power, 2xRJ 45 network, 1x VGA, 1x USB, 1x3.5mm audio and 1x HDMI” on meeting table , board room table top with all required accessories, fixtures & manpower etc. complete.

Providing and constructing 750mm height storage of depth 450mm and construction with ledge as per drawings. All external surfaces to be finished in approved Laminate , with shelf & horizontal surfaces drawer bottoms finished with interior grade laminate on the interior surface. All exposed edges to be finished with Laminate with melamine polish. Rate to include hardware such as approved locks, L hinges for shutters, approved handles, door stop, tower bolt, etc. complete. Training . Office Cabin Back side , Meeting Room

Providing and constructing 900 mm height storage of depth 300 to 400 mm Depth Over Head Storage a. All external surfaces to be finished in approved Laminate , with shelf & horizontal surfaces drawer bottoms finished with interior grade laminate on the interior surface. All exposed edges to be finished with Laminate with melamine polish. Rate to include hardware such as approved locks, L hinges for shutters, approved handles, door stop, tower bolt, etc. complete. Training . Office Cabin Back side , Meeting Room Over head storage in Lab

Providing and constructing 32 mm thk ledge of width 300mm along with Drawer finished with 4mm veneer as per drawings. All exposed edges/surfaces to be finished with veneer. etc. complete Training + Meeting Room

Providing and applying three coats of Acrylic Emulsion paint of desired shade, of Asian / Berger / ICI paints or equivalent on internal wall surfaces wherever required at all heights to give an even and uniform shade, applied over a coat of primer and putty "Altek" or "Wall care" or approved equivalent as per manufacturer specification fully to give a smooth and even surface including thoroughly brushing the surface free from water / mortar dropping and other foreign matter and sand papered smooth, complete per manufacturers specifications and as directed. [for ceiling]

Providing and applying three coats of Luster paint of desired shade, of Asian / Berger / ICI paints or equivalent on internal wall surfaces wherever required at all heights to give an even and uniform shade, applied over a coat of primer and putty "Alter" or "Wall care" or approved equivalent as per manufacturer specification fully to give a smooth and even surface including thoroughly brushing the surface free from water / mortar dropping and other foreign matter and sand papered smooth, complete per manufacturers specifications and as directed. As per Green buildings norms VOC of paint should not be increase 150g/L less water.[for wall]

Supply, Installation, Testing and Commissioning of Double Door Powder Coated, IP 43, Concealed / Surface type Distribution Board with separate Neutral bus, 2 Nos of plated earth continuity studs, detachable knock out plate etc. complete with angle frame, bolt & nuts and anchor fastener. Cost should include chipping, removing debris, repacking with cement mortar, curing etc. wherever required.6 Way VTPN DB (MCB DB)

Supply, Installation, Testing and Commissioning of Double Door Powder Coated, IP 43, Concealed / Surface type Distribution Board with separate Neutral bus, 2 Nos of plated earth continuity studs, detachable knock out plate etc. complete with angle frame, bolt & nuts and anchor fastener. Cost should include chipping, removing debris, repacking with cement mortar, curing etc. wherever required.8 Way SPN DB

Supply, Installation, T and C of C curve MCB's / ELCB's / RCCB's of approved make. 6, 10kA SP MCB

Supply, Installation, T and C of C curve MCB's / ELCB's / RCCB's of approved make. 25A , 10kA TP MCB

Supply, Installation, T and C of C curve MCB's / ELCB's / RCCB's of approved make. 40A , 10kA TP MCB

Supply, Installation, T and C of C curve MCB's / ELCB's / RCCB's of approved make. 40A - 63A, 10 kA TPN/FP MCB

Supply, Installation, T and C of C curve MCB's / ELCB's / RCCB's of approved make. 40A, 30mA DP ELCB / RCCB

Supply, Delivery at site, unloading, Inspection on delivery and co-ordination with supplier for defects if any, storage, shifting, laying through trenches / hume pipes / on wall-columns / Cable trays / Trenches with trays, on truss at different heights using saddles & spares, clamping's, Testing and Commissiong of 1.1KV LV XLPE insulated armoured/unarmoured Cable of following sizes , with aluminium/copper conductor, GI armour as per technical specification. The rate also to include fixing of cable tag on both the ends. If cable is buried, route marker are also to be included placed / fixed every 25 mtrs. 4C x 10 Sqmm A2XWY Cable From Existing LV dist. Panel to Proposed VTPN DB.

Supply, Delivery at site, unloading, Inspection on delivery and co-ordination with supplier for defects if any, storage, shifting, laying through trenches / hume pipes / on wall-columns / Cable trays / Trenches with trays, on truss at different heights using saddles & spares, clamping's, Testing and Commissiong of 1.1KV LV XLPE insulated armoured/unarmoured Cable of following sizes , with aluminium/copper conductor, GI armour as per technical specification. The rate also to include fixing of cable tag on both the ends. If cable is buried, route marker are also to be included placed / fixed every 25 mtrs. 4C x 4 Sqmm 2XWY Cable from Proposed VTPN DB to AC ODU DB

anti static laminate in server room Providing and fixing Access floor systems as per below mentioned specifications. The access floor system to be installed shall provide a maximum finished floor height of 300mm from the existing floor level. The system shall provide for suitable Floor tiles, pedestals and stringers designed to withstand various static loads and rolling loads. The entire Access floor system shall be made from below mentioned types of tiles and shall provide for adequate fire properties, acoustic ba

rrier and air leakage resistance. The system shall accept an approved Anti-static laminate covering with PVC beading on the edges of the tile. The system shall be able to withstand a UDL of 1350 kgs per Sqm and a Point Load of 450 Kgs. The pedestal will withstand Axial load of 2200 kgs. Pedestal installed to support the panel shall be suitable to achieve a minimum finished floor height of 300mm from the existing floor level and shall placed at 605mm distance in both directions to form a grid of 605x605 mm. For prevention of corrosion pedestals are either powder coated or zinc electroplated as required. Pedestals shall support an axial load of 2200 Kgs. Server Room

Supply and laying of following main/sub-mains Wiring using 650 V grade multistring Copper FR Wire in 25 mm. Die PVC MMS surface conduit inclusive all accessories and hardware, saddles / spacers etc. Complete in all respect.2 x 4.0 + 1 x 2.5 mm²

Supply and laying of following main/sub-mains Wiring using 650 V grade multistring Copper FR Wire in 25 mm. Die PVC MMS surface conduit inclusive all accessories and hardware, saddles / spacers etc. Complete in all respect.2 x 2.5 + 1 x 1.5 mm²

Supply and laying of following main/sub-mains Wiring using 650 V grade multistring Copper FR Wire in 25 mm. Die PVC MMS surface conduit inclusive all accessories and hardware, saddles / spacers etc. Complete in all respect.2 x 1.5 + 1 x 1.0 mm²

Point wiring using [ 2 x 1.5 ] mm² FR PVC multistring copper wire in 25 mm. Die PVC HMS surface conduit with modular accessories i.e. Concealed / surface type modular box and plate, modular switches and sockets, ceiling rose / holder, round plate, saddles and spacers, hardwareetc. complete in all respect.Primary Light Point @ 8 Mtr.

Point wiring using [ 2 x 1.5 ] mm² FR PVC multistring copper wire in 25 mm. Die PVC HMS surface conduit with modular accessories i.e. Concealed / surface type modular box and plate, modular switches and sockets, ceiling rose / holder, round plate, saddles and spacers, hardwareetc. complete in all respect.Secondary light Point @ 3 Mtr.

Point wiring using [ 2 x 1.5 ] mm² FR PVC multistring copper wire in 25 mm. Die PVC HMS surface conduit with modular accessories i.e. Concealed / surface type modular box and plate, modular switches and sockets, ceiling rose / holder, round plate, saddles and spacers, hardwareetc. complete in all respect.Independent Light Point @ 5 Mtr.

Point wiring using [ 2 x 1.5 ] mm² FR PVC multistring copper wire in 25 mm. Die PVC HMS surface conduit with modular accessories i.e. Concealed / surface type modular box and plate, modular switches and sockets, ceiling rose / holder, round plate, saddles and spacers, hardwareetc. complete in all respect.Two way Light Point

Point wiring using [ 2 x 1.5 ] mm² FR PVC multistring copper wire in 25 mm. Die PVC HMS surface conduit with modular accessories i.e. Concealed / surface type modular box and plate, modular switches and sockets, ceiling rose / holder, round plate, saddles and spacers, hardwareetc. complete in all respect.Fan Point with 5 step 300w Electronic regulator.

Point wiring using [ 2 x 1.5 ] mm² FR PVC multistring copper wire in 25 mm. Die PVC HMS surface conduit with modular accessories i.e. Concealed / surface type modular box and plate, modular switches and sockets, ceiling rose / holder, round plate, saddles and spacers, hardwareetc. complete in all respect.2 Way Fan Point with 5 step 300w Electronic regulator.

Point wiring using [ 2 x 1.5 ] mm² FR PVC multistring copper wire in 25 mm. Die PVC HMS surface conduit with modular accessories i.e. Concealed / surface type modular box and plate, modular switches and sockets, ceiling rose / holder, round plate, saddles and spacers, hardwareetc. complete in all respect.6 Amp Plug on Board

under Structure 30x30mm Sq. tube With Side Cover Powder coated Frame Frame - 18-20mm thick Black Granite . Surface Mirror Finish, Edge polishe and moulded , a Groove at Bottom to Avoid liquid spillage reach Storage,To be put on 20 mm x 3mm Thick foam tape which will be glued to the modules top at this edge ,Under bench modules ,Drawers – the shutter & Drawer facia in asanwich construction , foam sheet is filled in between to aviod thud while closing , Telescopic channel with soft closing machanism havve been provided , Drawers can sustin weigth upto 30 Kgs, MOC 1.0 mm Thick Podwer coated GI Confirming to IS277,Pad locks – Lock with dimple keys ,Handels – in built Handle ( Consealed ),Sinks –PP sinks with bottle trap Taps & Faucets ,Three ways “epoxy poser coated brass trap for sinks with din 12920 color coding ,Dual cup eye wash fitted near sink.,Peg board with 25 Nos of pegs fitting behing sinks Elecatrical accessories ,Norisys make 6 x 16 Amps ,230 vac sokets for indutries Puposed ,Internal wiring made with polycap make wires of 2.50 Sq.MM.,All Makes – Values &faucets RW/ Premier , Electrical accessories – Norisys / FCG/ wipro/BCH/ Polycap, G.I Sheet – jindal / Essar Hardware – Ebco/ Haffle Screws –SS304 Local Make Wet Lab - 3.80+4.50+3.20 =11.50M Length x Width 0.95 Heigth 0.90 m

under Structure 30x30mm Sq. tube With Side Cover Powder coated Frame Frame - 18-20mm thick Black Granite . Surface Mirror Finish, Edge polishe and moulded , a Groove at Bottom to Avoid liquid spillage reach Storage,To be put on 20 mm x 3mm Thick foam tape which will be glued to the modules top at this edge ,Under bench modules ,Drawers – the shutter & Drawer facia in asanwich construction , foam sheet is filled in between to aviod thud while closing , Telescopic channel with soft closing machanism havve been provided , Drawers can sustin weigth upto 30 Kgs, MOC 1.0 mm Thick Podwer coated GI Confirming to IS277,Pad locks – Lock with dimple keys ,Handels – in built Handle ( Consealed ),Sinks –PP sinks with bottle trap Taps & Faucets ,Three ways “epoxy poser coated brass trap for sinks with din 12920 color coding ,Dual cup eye wash fitted near sink.,Peg board with 25 Nos of pegs fitting behing sinks Elecatrical accessories ,Norisys make 6 x 16 Amps ,230 vac sokets for indutries Puposed ,Internal wiring made with polycap make wires of 2.50 Sq.MM.,All Makes – Values &faucets RW/ Premier , Electrical accessories – Norisys / FCG/ wipro/BCH/ Polycap, G.I Sheet – jindal / Essar Hardware – Ebco/ Haffle Screws –SS304 Local Make System Lab -4.90+4.90+4.90 =14.70M Length x Width 0.95 Heigth 0.90 m - 2 Nos PP Sink - 0.50x0.50mm x380

Supply and laying of cat -6 wire in 25 mm. Die rigid PVC MMS conduit/ race way from Server room to each Computer Point inclusive all accessories like hardware, saddles / spacers ferrules etc. complete in all respect

Supply, Installation of 6A Modular Switch & multi pin shuttered Socket on suitable modular plate & metal concealed/Surface box. (w/o wire & conduit)

Supply, Installation of 16A Modular Switch-1 Nos above table top & 6 A multi pin shuttered Socket-3 Nos. Below table top on suitable modular plate & metal concealed/Surface box. (w/o wire & conduit)

Supply & Installation of GI 14 SWG Pull box od size 250 x 250 x 50mm at ceiling for Cat 6 Cable distribution including Cover plate.

Supply, Installation of twin RJ-45 shuttered socket (Data + Voice) outlets including all material such as modular plate, box where ever required etc. complete (without wire & conduit)

Supply, Installation of RG 6 Socket for T.V. on suitable modular plate & metal concealed box. (w/o wire & conduit)

Supply, Fixing, testing & commissioning of LED recessed mounted down light fitting & Fixtures including all type of mounting arra

ngement etc. complete.

Supply, Fixing, testing & commissioning of LED linier tube light fitting & Fixtures including all type of mounting arrangement etc. complete.

End termination for 1.1KV Grade LV Cable Terminations using single compression Nickel Plated Brass/PG Cable Glands and with aluminium or Copper Crimping type Cable Lugs with inhibition compound complete for following sizes : 4C x 10 Sqmm A2XWY Cable From Existing LV dist. Panel to Proposed VTPN DB.

Bore Type Maintenance free Readymade Chemical powder type Earth pits including civil works of chamber, plaster and CI cover duly numbered as instructed by EIC complete. Bidder must submit guarantee certificate for ER below 3 ohms for a period of 10 years of these pits. Rate to include test link per pit for measurement of ER values as may be desired by client during or after guarantee period 80 mm dia. X 3 Mtrs. (Pipe in Pipe)

Supply, laying, straightening, cutting, bolting (including bitumen paint) of following Earth Strips complete in all respect. Rate shall be inclusive of spacer clamp for main earth flat, suitable clamping with M.S / Cu. flats for earth wires etc. Including terminal crimping type sockets, bolts & washers, etc. required for the complete job.25 x 6 mm. HDGI

Supply, laying, straightening, cutting, bolting (including bitumen paint) of following Earth Strips complete in all respect. Rate shall be inclusive of spacer clamp for main earth flat, suitable clamping with M.S / Cu. flats for earth wires etc. Including terminal crimping type sockets, bolts & washers, etc. required for the complete job.1C x 2.5 Sq mm Cu flexible cable

End termination for 1.1KV Grade LV Cable Terminations using single compression Nickel Plated Brass/PG Cable Glands and with aluminium or Copper Crimping type Cable Lugs with inhibition compound complete for following sizes : 4C x 4 Sqmm 2XWY Cable from Proposed VTPN DB to AC ODU DB

CO@2-(mailto:CO@2-塹ᴻ䡿ⲯ嶂藄挧ꮥ)

ABC Type is portable device designed to extinguish fires of Class A,B & C its dry Chemical power extinguisher Class A - flammable liquids Class B - energized electrical equipment Class C- it is multipurpose extinguisher

Silver Printed Sticker PUSH - PULL 3" x 3"

Plexiglas Base with Nigth Glow _ Name Plate 12" x 4"

3M Flim Graphic Design

CO2 - Type is portable device designed to extinguish fires of Class A,B & C its dry Chemical power extinguisher Class A - flammable liquids Class B - energized electrical equipment Class C- it is multipurpose extinguisher

Wall Graphics on Corridor Walls- Digital Printing on 3M/Ivory Vinyl, matt lamination and pasting on the surface etc. Complete