Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹39.4 L+₹89,317 (2.32%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹39.7 L+₹1.2 L (3.10%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹39.7 L+₹1.3 L (3.26%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹44.7 L+₹6.2 L (16.2%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
8 Jul 2024, 6:00 pmClosed
GE 864 EWS
GE 864 EWS, C/o 56 APO
CLEANING AND REPAIR TO SEWAGE LINE MANHOLE SEPTIC TANK SOAKAGE WELL AND REPAIR TO DRAIN PATH AND FENCING IN ZONE C UNDER AGE BR III AT BB CANTT SRINAGAR
2024_MES_658902_1
864/WS-38/2024-25
Open Tender
Civil Works
Item Rate
335 days
GE 864 EWS
As per NIT
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹98,000
Yes
25 Jul 2024
10 Jun 2024
13 Jul 2024
10 Jun 2024
8 Jul 2024
24 Jun 2024
Amount
Demolition of brick work or stone masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for foundation, shafts, cesspits, manholes, pier holes etc. not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified and directed.
Ditto all as per serial item No. 4.00 described here-in-before but not exc 3.0 mtr in depth.
Demolition of cement concrete (un-reinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for plain cement concrete (1:3:6), type C2 (using 40mm graded crushed stone aggregates) as in foundations, filling in and mass concrete, complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.
Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above the starting point, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar (1:4), complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregates) as in coping etc. weathering, slightly rounded or chamfered angle and throating including necessary form work, complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:4) on other than fair face of brick work, finished even and smooth without using extra cement, with using water proofing compound @ 3% by weight of cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item.
M&L for 200mm bore RCC (Reinforced cement concrete) pipes, Class NP-2 with collar, laid in trenches and jointed, including dismantling of old unserviceable pipe complete all specified and directed.
M&L for 150mm bore RCC (Reinforced cement concrete) pipes, Class NP-2 with collar, laid in trenches and jointed, including dismantling of old unserviceable pipe complete all specified and directed.
M&L for precast RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in cover slab for manhole etc. including necessary formwork, complete all as specified and directed.
M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed.
M&L for precast cement concrete (1:2:4) Type B0 (using 12.5mm graded crushed stone aggregate) as in louvers and jallies, 35mm thick (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified and directed.
Cleaning of CI/ PVC pipe of any bore and size, laid in trenches including bends / junctions / gully traps etc. and removing of sludge, if any to a distance not exc 50 mtr from starting point and depositing where directed at site in borrow pits, complete all as specified and directed.
Ditto all as per serial item No. 19.00 described here-in-before but pipes fixed on wall, complete all as specified and directed.
Cleaning of manhole of any size, depth not exc 1.5 mtr including taking off manhole cover and refixing the same after cleaning, dewatering and disludging mechanically, removing the waste materials and sludge to a distance not exc 50 mtr and depositing where directed at site in borrow pits, complete all as specified and directed. Notes :- The quoted rates shall included for earth work / excavation and removing of surplus soil to a distance not exceeding 50 metre.
Cleaning of manhole of any size, depth exc 1.5 mtr including taking off manhole cover and refixing the same after cleaning, dewatering and disludging by mechanically, removing the waste materials and sludge to a distance not exc 50 mtr and depositing where directed at site in borrow pits, complete all as specified and directed. Notes :- The quoted rates shall included for earth work / excavation and removing of surplus soil to a distance not exceeding 50 metre.
Cleaning of drain pipes (SGSW / RCC / AC) of any size including manholes channels by mechanically from manhole to manhole for cleaning eye and well flushing with water after cleaning including taking off manhole cover and refixing the same after cleaning and removing waste material / sludge to a distance near by suitable distance and depositing in the borrow pits, complete all as specified and directed.
Cleaning of septic tank of capacity up to 25 users by desludging inlet chambers and removing the waste materials by mechanically with use of mechanical sunction machine (contaminated water and sludge/ solid waste) and sludge to a distance to near by suitable distance as cleaning measurements of quantity of contaminated water and solid waste /sludge in the percentage of 40% and 60%, complete all as specified and directed. Notes :- The quoted rates shall included for earth work / excavation and removing of surplus soil to a distance not exceeding 50 metre.
Ditto all as per serial item No. 24.00 described here-in-before but capacity above 25 and upto 75 users.
Ditto all as per serial item No. 24.00 described here-in-before but capacity above 75 and upto 150 users.
Ditto all as per serial item No. 24.00 described here-in-before but capacity above 150 users.
Cleaning of blockage of Indian or European type water closet including blockage of Nahani trap or floor trap or gully trap of any size type upto the Ist manhole (blockage of any type took place at IWC or EWC, blockages of kitchen trap, bathroom, wash hand basin trap due to stuck of any substance or material due to any other reasons to the entire satisfaction of users/ Occupants manually or with using pumping device or any other suitable method or mechanically and getting the signature of the User's on complaint slip for Zone 'C' area at BB Cantt Notes:- (a) Contractor shall deploy four numbers of Safaiwala's to carryout day to day complaints (Seven days of week Sunday/ holidays) of blockage etc and complaint slip shall be collected from the Complaint cell of AGE B/R-III. (Time of 04 x safaiwala-0900hrs to 1700hrs). (b) Contractor has to make sure that the blockage complaints so received shall be completed within the 24 hours from the time of receipt complanits, and for any delay in completion of the particular complaint a penalty @ Rs. One Hundread Fifty (Rs. 150/-) will be recovered from the contractor's dues per complaint.
Item No. 28.00 contd... (c) Contractor has to make sure that upon requirement by the sub-division, the contractor has to depute the same four or more Safaiwala's for cleaning of MES Honey sucker after use of the equipment at GE 864 MT area. (d) The Safaiwalas must have all requisite tools, safety equipments and winter protective clothing. (e) The payment shall be made to employees/ Safaiwalas on or before 7th day of every calander month. Payment to the employees shall be done by crossed cheque ECS / NEFT through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per Minimum Wages Act. (f) Contractor has to submit proof of payment and proof of EPF & ESIC subscription made by him alongwith RAR/ final bill. (g) Contractor shall quote the rates considering employees monthly leaves, releiver etc. as per labour law and nothing extra shall be paid on this account. (h) The rates quoted shall be inclusive of suitable reliever of manpower engaged by contractor separately in addition to 04 persons. (j) Portable pump for dewatering including fuel & Manpower also engaged where manually cleaning not Possible.
Item No. 28.00 contd... (k) Sewage cleaning rods, sefty Jacket Mask, helmet etc also be provided by the contractor to worker for working hours. (l) Cost of attendance register, printed work diary, material register/ security or entry passes and any other stationary reqd is to be born by the contractor and the rates quoted for the above are included in the quoted rates and no extra cost shall be claimed and entertained on this account. (m) Penalty :- In case of absence of Safaiwalla the penalty shall be imposed @ Rs 800.00 per person per day and the same shall be recovered from contractor's dues. (n) Being defence installation, the contractor shall ensure that antecedents of the personnel deployed are verified through concerned Police authorities before their deployment. The character and antecedent verification report of each employee deployed by the contractor should be submitted. (o) Contractor shall submit all documents before receipt of work order (Aadhar Card, Police verification and Bank Pass book Aadhar linked copy) of each worker intend to deploy on work.
M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
S&F precast steel fibre reinforced concrete (SFRC) manhole cover with frame (factory made) of size 560mm dia heavy duty (grade of concrete M-35) complete all as specified and directed.
M&L for preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
S&F 2nd class soft wood wrought, 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round including dismantling old unserviceable trellis complete all as specified and directed.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with mixture of white & grey cement in equal proportions and no pigments set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar (1:6), complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:4) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling old unserviceable sheet complete all as specified and directed.
Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in road side kerb stone of size and shape as approved, set in CM (1:4), including use and waste formwork if required complete all as specified and directed.
M&L for PCC (1:3:6), type C1 (using 20mm graded crushed stone aggregates) as in surface channels and drains including necessary formwork complete all as specified and as directed.
M&L for mild steel as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire and dismantling of old unseviceable fencing complete all as specified and directed.
Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed. Note : Actual weight of the fencing shall be ascertained by Board of Officers to be convened by GE.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of newely plastered or unplastered surfaces of walls and applying two coat of acrylic exterior emulsion paint over a coat of primer complete all as specified and directed
M&L for preparation of old treated plastered surface of wall and applying a coat of cement base paint complete all as specified and directed.
M&L for walling of random rubble, uncoursed, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.
Excavation in post holes (or similar holes), each not exceeding 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth in layers n exc 25cm thick, watering and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and directed.
S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails staining bolts including, securing or tying at crossings with and provn of galvinised mild steel wire, staples or steel pins etc complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long with dia of neck exc 5 to 10mm complete all as specified and directed.
M&L for Hardcore of broken stoe/ boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M/s Lal Enterprises
M/S PARVEZ AHMAD LONE
M/S AIJAZ ENTERPRISES
GHULAM NABI GILKAR AND CO
M/S SUHEEL CONSTRUCTIONS
M/S SHAH CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .