Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC | ₹39.5 L Quoted ₹41.5 L | L1 | Accepted-AOC Negotiated the Lowest rate Quoted tenderer accepted |
| 2 | L2₹42.3 LRejected-AOC | ₹42.3 L | L2 | Rejected-AOC Rate quoted Higher than L1 Bidder |
| 3 | L3₹43.7 LRejected-AOC | ₹43.7 L | L3 | Rejected-AOC Rate quoted Higher than L1 Bidder |
| Sl No | Description | Qty | Unit | Ravi Electricals L3 | SHREE JAYALAKSHMI ELECTRICALS L2 | KARTHIKEYAN ELECTRICALS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 1 No 26 persons capacity Bed-cum-Passenger Lift with M/C room, Speed 1 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD and as per the following technical specifications with free Guarantee period of one year from the date of commissioning.
Technical specifications:
1. Type of lift : Bed cum Passenger lift
2. Capacity of lift : 26 persons capacity Bed cum passenger lift
3. Speed : 1.00 Meter/Sec
4. Type of Drive: specific variable voltage variable frequency V3F drive with enhanced ride comfort and leveling functions.
5. No. of floors: Ground + 2 floor
6. Leveling Accuracy: High level | 1 | No | 37,00,000 ₹37 L | 35,84,000 ₹35.8 L | 35,15,000 ₹35.1 L |
| 1.017. Construction of Car: 18 SWG high quality stainless steel 304 grade car, powder coated stretcher impact protection car size 1600 mm(W) x 2400 mm(D). 8. Position of machine: Directly above the lift well 9. No. of landing entrance: 3Nos 10. No. of car entrance: one in front only 11. Car entrance door: power operated. 12. Car entrance door: power operated side opening sliding 18 SWG stainless steel 304 grade vandal proof door with provision for emergency key opening at all landings. 13. Lift well : existing (as per IS) 2400mm length x 3000mm width. 14. Car clear opening: as required (as per IS 14665) (part I) – 2000) 1200mm Height 15. Power supply: 400/415 V, 3 phase, 50 Cy/sec., A.C. supply for power and 230 V, 50 HZ, single phase, AC supply for light. 16. Control: Micro computer (Micro processor) based simplex selective collective control with/without attendant. 17. Car fitting: Glare free LED lighting with 300mm sweep cabin fan with elegant look and with comfortable ventilation inside the car. 18. Lift well: R.C.C. construction with brick masonry | ||||||
| 1.0219. Indication: UP/Down digital direction and position indicator for all landing and in car 20. Emergency alarm bell: Battery operated alarm bell to be provided with Automatic charging device 21. Emergency light: Battery operated light to be provided with Automatic charging device 22. Fire Man’s switch: To be provided at ground floor 23. Minor builders work: included in the scope. 24. Scaffolding: Included in the scope 25. Sill angles and facia plates: included in the scope 26. Steel for lift machinery: Included in the scope 27. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 28. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. | ||||||
| 1.0329. Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room with telecom exchange unite with one trunk and three extension linked proton 103 matrix telecom unit and required length of single twisted pair with thickness of 0.5 mm to 1 mm connecting the handsets and telecom exchange unit. 30. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 31. Floor annunciator with music. 32. Special features: a. Infra red door sensor with full height screen. b. Full width half height rear panel mirror. c. Tubular stainless steel hand rail in cars. d. Voltage stabilizer for circuit control. e. Stainless. Steel signal fixtures. f. Vandal proof S.S. Button with S.S. cover g. SS door frames for landing doors. h. VF door operator. i. Call Register signal | ||||||
| 1.04j. Stainless steel facia plate for car operating panel and landing fixtures. k. On – Off switch for fan and light l. Over load warning indicator with audio announcement 33. Other standard features: Over speed governor, phase failure and phase reversal relay, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro mechanical door locks emergency keyside supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joist for mounting the machineries 34. Site testing in accordance with IS 14665 should be carried out at the time of handing over. 35. Supply of operation and maintenance manual with necessary tools for operation. 36. Guarantee: Free Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of one year from the date of commissioning. Make and Model should be approved by the departmental officers before used on work. | ||||||
| 2.00 | GST 18 % | 1 | No | 6,66,000 ₹6.7 L | 6,45,120 ₹6.5 L | 6,32,700 ₹6.3 L |
Tender Value
₹39.5 L
EMD Value
₹29,765
Closing Date
8 Oct 2025, 3:00 pmClosed
Superintending Engineer
Office of Superintending Engineer PWD Buildings construction and maintenance circle Madurai
Providing One No of twenty six persons capacity Bed Cum Passenger lift for Thoracic Medicine ward at Government Rajaji Hospital in Madurai District
2025_PWD_606316_1
30SE/Bldgs C and M Circle Madurai 2025-26-1 dated 16.09.2025
Open Tender
Electrical Works
90 days
Government Rajaji Hospital
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹29,765
29 May 2026
23 Sept 2025
8 Oct 2025
23 Sept 2025
8 Oct 2025
23 Sept 2025
Amount
Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 1 No 26 persons capacity Bed-cum-Passenger Lift with M/C room, Speed 1 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD and as per the following technical specifications with free Guarantee period of one year from the date of commissioning. Technical specifications: 1. Type of lift : Bed cum Passenger lift 2. Capacity of lift : 26 persons capacity Bed cum passenger lift 3. Speed : 1.00 Meter/Sec 4. Type of Drive: specific variable voltage variable frequency V3F drive with enhanced ride comfort and leveling functions. 5. No. of floors: Ground + 2 floor 6. Leveling Accuracy: High level
19. Indication: UP/Down digital direction and position indicator for all landing and in car 20. Emergency alarm bell: Battery operated alarm bell to be provided with Automatic charging device 21. Emergency light: Battery operated light to be provided with Automatic charging device 22. Fire Man’s switch: To be provided at ground floor 23. Minor builders work: included in the scope. 24. Scaffolding: Included in the scope 25. Sill angles and facia plates: included in the scope 26. Steel for lift machinery: Included in the scope 27. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year. 28. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories.
29. Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room with telecom exchange unite with one trunk and three extension linked proton 103 matrix telecom unit and required length of single twisted pair with thickness of 0.5 mm to 1 mm connecting the handsets and telecom exchange unit. 30. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 31. Floor annunciator with music. 32. Special features: a. Infra red door sensor with full height screen. b. Full width half height rear panel mirror. c. Tubular stainless steel hand rail in cars. d. Voltage stabilizer for circuit control. e. Stainless. Steel signal fixtures. f. Vandal proof S.S. Button with S.S. cover g. SS door frames for landing doors. h. VF door operator. i. Call Register signal
j. Stainless steel facia plate for car operating panel and landing fixtures. k. On – Off switch for fan and light l. Over load warning indicator with audio announcement 33. Other standard features: Over speed governor, phase failure and phase reversal relay, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro mechanical door locks emergency keyside supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joist for mounting the machineries 34. Site testing in accordance with IS 14665 should be carried out at the time of handing over. 35. Supply of operation and maintenance manual with necessary tools for operation. 36. Guarantee: Free Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of one year from the date of commissioning. Make and Model should be approved by the departmental officers before used on work.
SHREE JAYALAKSHMI ELECTRICALS (BID ID -1481933)
Ravi Electricals (BID ID -1482117)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid