providing dwf to hanuman nagar

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks (TBSP-H.II-01)

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all operational, incidental and labour charges such as shoring, sheeting, planking, strutting etc.,complete for finished item of work including seigniorage, excluding dewatering charges etc., as per SS-20 B (APSS 308) (Ordinary Soil - Manual Means - Up to 3.00 m Depth) Columns for Erecting

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402) Below Ground level Column Pedastals

Cement concrete(1:1.5:3) prop using 20mm gauge HG metal including cost and conveyance of all materials and labour charges ,seign. charges etc.complete

Cost of steel and its fabrication charges incl., bending, cost of binding wire etc., complete

Manufacturing, Supply and Installation of 3 Mtr high hot dipped galvanised stagging with GI sheet, Fasteners, Fencing as per drawing etc.

Supply and Installation of UPVC white pipes and accessories etc.

Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. 75 mm dia PVC 6 Kg

Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. 90 mm dia PVC 6 Kg

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. 75 mm dia PVC 6 Kg

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. 90 mm dia PVC 6 Kg

Supply and delivery of 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-SO/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MDPE PESO Blue Pipe & Supplying and and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work 75 mm dia

Fixing of Saddles, FCV's, GI Pipe, Bib Taps and MDPE including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line

Supply and placing of the Nominal MIX using 20mm size for construction of CC blocks including cost and conveyance of all materials like cement, for M-20 grade

Drilling of borewell by down the hole hammer (DTH) drilling to the finished diameter of 163 mm (6 1/2") in all formations to the depth as specified and reaming the bore to the required dia, flusing the bore walls at an average pressure of 7 kg/Sqcm (100 PSI), conducting yield test, inclusive of transportation from point to point, crew charges, consumables, shifting of ring and all other charges etc., complete. The borewell should be true & Vertical and work should be carried out to the amendments if any from time to time.

Inserting UPVC 180 mm dia 6 Kg/sqcm Plain Casing

Inserting UPVC 180 mm dia 6 Kg/sqcm Slotted Casing

Manufacture, Supply, delivery of submersible Pump11set suitable to 150mm dia Borewells coupled with motor Three phase 2880 RPM 340V(-15%+10% range-290 to 375 Volts) of reputed make with minimum overall efficiency of 40% at the duty point with Radial including cost and conveyance of material, all taxes surcharges, Sale tax, Exice duty, TOT, Over head charges & Transporting charges etc., The Pumpset should confirm to IS 8034:1989 and Motor should confirm to IS 9283:1979 with ISI/ISO 2000 mark with a guarantee period of 18 months from the date of installation. 5.00HP 12-16 Staging Three face submmersible pumpset rate as per approved. Makes : Texmo / CRI / KSB / Aryan Varsha / Lubi

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply and delivery of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:1990 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 3 Core 2.5Sq.mm

Supply and delivery of UPVC Pipes(Aashirvaad)Nominal diameter of Standard 60 / 50 mm UPVC pipe with standing upto 20 Kgs / CM2

S/D of 50mm Clampset & Nut bolts

S/D of 50mm dia Non Return Valve

Supply of WPSC (Weather Proof Single Core) ISI mark Alluminium wire-16mm

Supply and fixing of Bore Cover

Installation, Erection & commissioning of Submersible pumpset

Construction of pipe line for water supply with HDPE pipes as per IS:4984:1985, with its amendments and revisions there on including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alignment and gradient , trench excavation for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost, conveyance of all materials and labour charges for finished item of pipe line work and excluding all Taxes. 75mm Dia 8 kg/cm2 HDPE Pipe line

Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rates are inclusive of cost and conveyance of all materials & specials , but excluding CED & other taxes. 50mm Air valves on 75mm Dia 8kg/cm2 pipe line

Construction of sluice valve set up to suit the pressure class of pipe including cost and conveyance of all materials such as sluice valve ,dimantelling join and other required specials for air valve arrrengements such as D/F pipes mechanical joints collers flanges etc as per data sheet and constrution of RCC valve chamber for finished items of works including cost of all materials all type of tax,labour charges earth work excavetion charges in all types of soils except hard rocktesting to the required pressure and refilling and tamping.etc complete for finished item of work 80mm Sluice valves on 75mm Dia 8kg/cm2 piep line

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 140mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 110mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 90mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 75 mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 63 mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 140mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 110mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 90mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 75 mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 63 mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc., complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS-20B (APSS 308), For Vertical Posts, Platforms, For Drains

Plain cement concrete corresponding to (1:5:10) prop mix nominal mix (Cement: fine aggregate: coarse agregate) using 40mm size hard broken granite (IS 383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse agregate, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidential, and labour charges such as mixing, laying and ramming concerete in layers in position not exceeding 15cm finishing top surface curing concrete etc., complete for finished item of wor for Platform, Vertical posts, For Curbs, For Drains, For Drain curbs

Plastering with CM (1:5) using 12mm thick including cost and conveyance of all materials and labour charges etc., complete, For Platforms, For curbs, For Drains, For Drain curbs

Collection and filling of Stone Dust with departmental pre-measurements, irrespective of thickness including cost and conveyance of all materials, labour charges, watering and tamping etc., complete, around the platform

Fixing of Battery of Taps including Transportationfrom Gowdown ,keeping in position the vertical posts etc., complete.

Painting two coats with approved brand departmental color including C/c of all materials and L/c etc., complete.

Removing of Battery of Taps including Transportation to Godown etc., complete.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc., complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS-20B (APSS 308), For Vertical Posts, Platforms, For Drains

Plain cement concrete corresponding to (1:5:10) prop mix nominal mix (Cement: fine aggregate: coarse agregate) using 40mm size hard broken granite (IS 383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse agregate, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidential, and labour charges such as mixing, laying and ramming concerete in layers in position not exceeding 15cm finishing top surface curing concrete etc., complete for finished item of wor for Platform, Vertical posts, For Curbs, For Drains, For Drain curbs

Plastering with CM (1:5) using 12mm thick including cost and conveyance of all materials and labour charges etc., complete, For Platforms, For curbs, For Drains, For Drain curbs

Collection and filling of Stone Dust with departmental pre-measurements, irrespective of thickness including cost and conveyance of all materials, labour charges, watering and tamping etc., complete, around the platform

Manufacture, Supply and Delivery of Structural steel including, fabrication charges, all taxes and loading, unloading and transportation to site etc., complete., Plates 6mm thick @ 3.00kg/each, Hold fasts @ 0.25kg/each

Supply and Delivery of 50mm dia GI pipe including all taxes and transportation to site etc., complete.

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 15mm dia. GI pipe (TBSP-G.I-07)

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 15mm dia. GI Couplings

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 15mm dia. GI Elbows

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia brass gate valve

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia GI union

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 4" long nuts and bolts

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia GI elbow

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia GI Tee

Taking branch water connection from the existing 15 mm nominal size GI pipe including cutting threading, etc., complete with fitting TBSP-G.IV-03

Fixing of Battery of Taps including Transportationfrom Gowdown ,keeping in position the vertical posts etc., complete.

Painting two coats with approved brand departmental color including C/c of all materials and L/c etc., complete.

Manufacture, Supply and Delivery of Structural steel including, fabrication charges, all taxes and loading, unloading and transportation to site etc., complete. Plates 6mm thick @ 3.00kg/each & Hold fastens, Hold Fast @ 0.25 Kg/each

Supply and delivery of 15 mm dia GI pipe

Supply and delivery of 15 mm dia GI elbows

Supply and delivery of 50 mm dia union

Supply and delivery of 50 mm dia GI Elbow

Supply and delivery of 50 mm dia GI pipe

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indianmakeheavytype-50mmNBSize TBSP-G.III-06

Hire charges of 30KVA Generator excluding the cost of fuels and transportation charges from Warangal to Medaram for Testing Pipe Lines, cisterns etc., complete. For Repair and testing of existing pipe line and BOT's For Testing of pipeline ( 3 Schemes, 3 hours per day)

Hire charges of 30KVA Generator excluding the cost of fuels and transportation charges from Warangal to Medaram for Testing Pipe Lines, cisterns etc., complete. For Repair and testing of existing pipe line and BOT's During Jathara Period, idle charges

Hire charges of 30KVA Generator excluding the cost of fuels and transportation charges from Warangal to Medaram for Testing Pipe Lines, cisterns etc., complete. For Repair and testing of existing pipe line and BOT's Fuel Charges during Jathara, Running period

Erection of Existing Pumpset including labour charges etc., complete.

Removing of Pumpset and Transport to Godown

PUMP OPERATOR CHARGES For Repair and testing of existing pipe line and BOT's

PUMP OPERATOR CHARGES For Opertation and Maintenance of pipe line and BOT's during the Jathara Period

PUMP OPERATOR CHARGES Generator operator during jathara

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Repair and testing of existing pipe line and BOT's, Plumbers

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Repair and testing of existing pipe line and BOT's, Electrician

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Repair and testing of existing pipe line and BOT's, Man Mazdoor

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Opertation and Maintenance of pipe line and BOT's during the Jathara Period Plumbers

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For For Opertation and Maintenance of pipe line and BOT's during the Jathara PeriodElectrician

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Opertation and Maintenance of pipe line and BOT's during the Jathara Period, Man Mazdoor

Cost,Supply and Delivery of 25 mm Dia 10.0Kg/cm2 PVC pipe including all taxes, loading unloadingandtransport to site etc., complete

Lowering, Laying, jointing of for PVC pipes including earth work excavation and testing to hydralic test pressure including cost of water with a water lead of 500m etc., complete.

G.I. Strip / Plate / Wire (per K. G)

Tap Connection with Excavtion at saddle, pipe connection, Salak bottle, Thread bendals

Plumber engaed for operation and maintance of water supply

Man mazdoor Enged for operation and maintance

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks (TBSP-H.II-01)

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all operational, incidental and labour charges such as shoring, sheeting, planking, strutting etc.,complete for finished item of work including seigniorage, excluding dewatering charges etc., as per SS-20 B (APSS 308) (Ordinary Soil - Manual Means - Up to 3.00 m Depth) Columns for Erecting

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402) Below Ground level Column Pedastals

Cement concrete(1:1.5:3) prop using 20mm gauge HG metal including cost and conveyance of all materials and labour charges ,seign. charges etc.complete

Cost of steel and its fabrication charges incl., bending, cost of binding wire etc., complete

Manufacturing, Supply and Installation of 3 Mtr high hot dipped galvanised stagging with GI sheet, Fasteners, Fencing as per drawing etc.

Supply and Installation of UPVC white pipes and accessories etc.

Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. 75 mm dia PVC 6 Kg

Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. 90 mm dia PVC 6 Kg

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. 75 mm dia PVC 6 Kg

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. 90 mm dia PVC 6 Kg

Supply and delivery of 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-SO/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MDPE PESO Blue Pipe & Supplying and and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work 75 mm dia

Fixing of Saddles, FCV's, GI Pipe, Bib Taps and MDPE including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line

Supply and placing of the Nominal MIX using 20mm size for construction of CC blocks including cost and conveyance of all materials like cement, for M-20 grade

Drilling of borewell by down the hole hammer (DTH) drilling to the finished diameter of 163 mm (6 1/2") in all formations to the depth as specified and reaming the bore to the required dia, flusing the bore walls at an average pressure of 7 kg/Sqcm (100 PSI), conducting yield test, inclusive of transportation from point to point, crew charges, consumables, shifting of ring and all other charges etc., complete. The borewell should be true & Vertical and work should be carried out to the amendments if any from time to time.

Inserting UPVC 180 mm dia 6 Kg/sqcm Plain Casing

Inserting UPVC 180 mm dia 6 Kg/sqcm Slotted Casing

Manufacture, Supply, delivery of submersible Pump11set suitable to 150mm dia Borewells coupled with motor Three phase 2880 RPM 340V(-15%+10% range-290 to 375 Volts) of reputed make with minimum overall efficiency of 40% at the duty point with Radial including cost and conveyance of material, all taxes surcharges, Sale tax, Exice duty, TOT, Over head charges & Transporting charges etc., The Pumpset should confirm to IS 8034:1989 and Motor should confirm to IS 9283:1979 with ISI/ISO 2000 mark with a guarantee period of 18 months from the date of installation. 5.00HP 12-16 Staging Three face submmersible pumpset rate as per approved. Makes : Texmo / CRI / KSB / Aryan Varsha / Lubi

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply and delivery of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:1990 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard 3 Core 2.5Sq.mm

Supply and delivery of UPVC Pipes(Aashirvaad)Nominal diameter of Standard 60 / 50 mm UPVC pipe with standing upto 20 Kgs / CM2

S/D of 50mm Clampset & Nut bolts

S/D of 50mm dia Non Return Valve

Supply of WPSC (Weather Proof Single Core) ISI mark Alluminium wire-16mm

Supply and fixing of Bore Cover

Installation, Erection & commissioning of Submersible pumpset

Construction of pipe line for water supply with HDPE pipes as per IS:4984:1985, with its amendments and revisions there on including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alignment and gradient , trench excavation for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost, conveyance of all materials and labour charges for finished item of pipe line work and excluding all Taxes. 75mm Dia 8 kg/cm2 HDPE Pipe line

Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rates are inclusive of cost and conveyance of all materials & specials , but excluding CED & other taxes. 50mm Air valves on 75mm Dia 8kg/cm2 pipe line

Construction of sluice valve set up to suit the pressure class of pipe including cost and conveyance of all materials such as sluice valve ,dimantelling join and other required specials for air valve arrrengements such as D/F pipes mechanical joints collers flanges etc as per data sheet and constrution of RCC valve chamber for finished items of works including cost of all materials all type of tax,labour charges earth work excavetion charges in all types of soils except hard rocktesting to the required pressure and refilling and tamping.etc complete for finished item of work 80mm Sluice valves on 75mm Dia 8kg/cm2 piep line