8126/SAR-T-41/2026-27 PROVN OF CERTAIN MINOR WORKS AT 30WG AND 1AFSB DEHRADUN UNDER GE (AF) SARSAWA

Supply, installation, testing and commissioning of energy efficient split type air conditioner, dual inverter type, 2 TR capacity, hot and cold (cooling & heating) operation. The air conditioner shall comprise indoor and outdoor units, provided with copper condenser coil, suitable for operation on 230 Volts, 50 Hz AC supply, complete with cordless remote control unit. The unit shall use eco-friendly green gas refrigerant conforming to latest statutory norms. The indoor unit shall be provided with inbuilt anti-dust / air filtration system for improved indoor air quality and shall have features such as memory function, dry mode, auto mode, ON/OFF timer, and other standard operational controls. The unit shall be of minimum 3-Star BEE rating. Installation shall include cutting of holes in wall/structure for refrigerant piping and drain, fixing of indoor and outdoor units, and making good the disturbed surfaces with existing matching colour, complete. The quoted rate shall be deemed to include cost of iron stand for fixing of outdoor unit, copper tubing with thermal insulation for interconnection between indoor and outdoor units, electrical connections, earthing arrangement, testing, commissioning and all accessories necessary for satisfactory functioning, complete all as specified and directed by Engineer-in-Charge.

All as per Item No 1.00 here-in-above but for capacity of AC 1.5TR complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

S&F single pole and neutral enclosure comprising one 20A, 240V, SP MCB, one 20A, 240V, 2-pin and earth industrial plug and socket, complete with suitable PVC enclosure, internal wiring, neutral link, earth terminal, glands, fixing accessories. screws, saddles, etc., fixed on wall complete in all respects as specified and directed by Engineer-in-Charge

S&F wiring for circuit/sub-main wiring from distribution board to 20A socket outlet using 2 x 4.0 sq.mm FRLS PVC insulated copper single-core cables (Phase & Neutral) and 1 x 4.0 sq.mm FRLS PVC insulated copper single-core earth wire drawn through heavy-duty PVC conduit (surface/recessed), including conduit, bends, junction boxes, saddles, couplers, inspection boxes, draw wire, termination, testing and commissioning, complete all as specified and directed by Engineer-in-Charge.

Dismantling old MS/steel rolling shutter of any size and position including cutting hole for taking down existing hold fast complete all as specified and directed.

S&F Steel rolling shutters, thickness of lath is 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated but gear operated type with bevel gear box and crank handle complete all as specified and directed.

M&L for preparation of new steel / iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

S&F for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified & directed.

S&F for Ball bearing for rolling complete all as specified & directed.