REPAIR REPLACEMENT LIGHT FITTINGS, POINT WIRING, SUB MAIN WIRING, EARTHING, DISTRIBUTION BOXES ETC FOR MD ACCN AND PXE TECH AREA CHANDIPUR

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.

Taking down carefully copper /aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia concealed in wall/ceiling, etc. and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia concealed in wall/ceiling, etc. and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia concealed in wall/ceiling, etc. and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia concealed in wall/ceiling, etc. and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (medium grade) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (medium grade) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (medium grade) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (medium grade) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 6/16 amps socket outlet on independent board controlled with one, 16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

All as per Sl Item No. 2 here-in-before but drawn in through existing concealed conduit.

All as per Sl Item No. 3 here-in-before but drawn in through existing concealed conduit.

All as per Sl Item No. 4 here-in-before but drawn in through existing concealed conduit.

All as per Sl Item No. 5 here-in-before but drawn in through existing concealed conduit.

M&L switch piano, flush type single pole, one way 5 Amps including connection.

M&L switch socket combination 2 in 1, 5 Amps flush type including connection

M&L switch socket combination 3 Pin, 15 Amps and one 5 amps controlled by one switch.

M&L ceiling rose PVC poly carbonate, isolated body with three terminals including connection.

S & F Electronic fan regulator, stepped type 120/280V complete all as directed.

Taking down Sub main /Sub circuit wiring of any type and size including conduit / casing capping / batten wiring complete all as directed.

M&L Submain wiring using three runs of FRLSH grade PVC insulated unsheathed, multistranded, copper conductor cable of size 4 Sqmm to be drawn in and including PVC conduit (medium grade) 25 mm dia. Note: Three runs of 4 Sqmm copper wire and one run of PVC conduit shall be measured as one unit.

M&L Submain wiring using three runs of FRLSH grade PVC insulated unsheathed, multistranded, copper conductor cable of size 6 Sqmm to be drawn in and including PVC conduit (medium grade) 25 mm dia. Note: Three runs of 6 Sqmm copper wire and one run of PVC conduit shall be measured as one unit.

M&L Submain wiring using six runs of FRLSH grade PVC insulated unsheathed, multistranded, copper conductor cable of size 6 Sqmm to be drawn in and including PVC conduit (medium grade) 20 mm dia. Note: Six runs of 6 Sqmm copper wire and one run of PVC conduit shall be measured as one unit.

M&L Submain wiring using six runs of FRLSH grade PVC insulated unsheathed, multistranded, copper conductor cable of size 10 Sqmm to be drawn in and including PVC conduit (medium grade) 20 mm dia. Note: Six runs of 10 Sqmm copper wire and one run of PVC conduit shall be measured as one unit.

Supply and fix in repair vertical TPN MCCB DB 8 way with 200 Amps rated busbar, double door type including provision for fixing MCCB 4 pole 100 Amps, 25 KA complete including taking down old DB and making disturbed surafce good to match the existing surface.

S & F in repair MCB DB made of sheet steel phosphatised powder coated with bus bar, neutral link, earth bar and din rail, double door type, TPN 4 way 240v, fixed in wall including making good disturbed surfaces including taking down old unserviceable , complete all as directed.

All as per Sl item No. 25 here-in-before but of SPN 8 way,240Volts double door as in repair.

All as per Sl item No. 25 here-in-before but of SPN 12 way, 240Volts double door as in repair.

S & F in repair MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity 16 kA, 415 Volts, 100 Amps including taking down old unserviceable one.

All as per Sl item No. 28 here-in-before but of capacity 63 Amps, 4 Pole, 16 KA.

S & F in repair MCB, SPN. 40-63 Amps rating 240, volt, 'C' series, 10 kA,

S & F in repair , MCB, TPN, 415 V, 50Hz, 10kA, 'C' series, 63 Amps series.

S & F in repair , MCB, TP, 415 V, 50Hz, 10kA, 'C' series, 25 to 63 Amps series.

S & F in repair MCB, SP, 6 to 32 Amps, 240 volt, 'B' Series, 10 kA, as in repairs.

Supply and fix in repair LED retrofit tube complete with powder coated decorative LED T-8 Batten with polycarbonate tube of capacity 20 Watt complete with including PVC insulated flexible copper wire of size .5 sqmm 2 core from ceiling rose to fitting complete incl taking down old fitting all as specified and directed

All as per Sl item No. 34 here-in-before but retrofit LED tube rod only of capacity 20 Watt.

All as per Sl item No. 34 here-in-before but 10 Watt, 2' all as specified and directed.

Supply & fix LED down lighter 2'x2', 40 W all as specified and directed by engrs in charge.

S & F in repair Sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP of 20 Amps .

M&L Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to galvanized earth lead strip of size 25 mm x 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron including 40mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate), 50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar including galvanised strip of size 25mm x 4mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and all as directed including taking down old unserviceable one. Note : GI strip upto 7.5 m length shall be deemed to include in the cost of above item.

S & F in repair Earthing conductor with GI strip of size (25 x 4) mm complete all as directed.

Disconnecting electrically and dismantling of ceiling fans of any make capacity and type, washing thoroughly of bearing /bush, fan blades and body of fan by kerosene /petrol etc and greasing for smooth functioning. Replacement of worn out/defective unserviceable parts (where ever necessary), reassembling the same including provision of three core flexible copper wire 1.5m long, including one coat of synthetic enamel paint (first quality) with super glossy finish to fan body and blades refixing the same to its original position including testing complete all as directed. Note : Replacement of worn out/ defective/unserviceable parts, flexible copper wire and rewinding shall be measured and paid separately under relevant items of these schedule).

All as per Sl item No. 41 here-in-before but for Exhaust fans of any size and make.

All as per Sl item No. 41 here-in-before but for air circulator fans/wall mounting fans of any size and make.

M&L Rewinding the motor of AC ceiling fan of any make and size (1200/1400mm) with super enamelled copper wire of adequate size/gauge including all insulation materials, varnishing etc complete all as directed.

All as per Sl item No. 44 here-in-before but for exhaust fans of 300/380mm sweep of any make.

All as per Sl item No. 44 here-in-before but for air circulators/wall mounting fans of any make and size.

Supply only Ball bearing of suitable size for any type/make of ceiling fan, Make : TATA/NBC/SKF.

All as per Sl item No. 47 here-in-before but for Exhaust fans of any type/size/make.

All as per Sl item No. 47 here-in-before but for air circulators/ wall mounting fans of any type/size/make.

Supply only capacitor 220 volts, 2.5 mfd suitable for ceiling fan, Make : SARADA/ TIBOCON/ UNIVERSAL.

Supply only capacitor 220 volts,4 mfd suitable for ceiling fan, Make : SARADA/ TIBOCON/ UNIVERSAL.

S & F in repair Hanging clamp (FI 25 mm x 300 mm length) for ceiling fan of adequate size including rubber reel, nuts, bolts and washers etc complete including taking down old unserviceable one, all as directed.

S&F in repair LED Bldg security light fitting 45 Watt with all accessories, (with extra driver) attractively styled high pressure die cast housing acting as a heat sink housing epoxy powder coated in dark graphite grey colour suitable for mounting bracket of 40mm bore GI pipe light grade complete with all accessories including taking down old fitting as directed.

Rekha Enterprises

RPL SYNDICATE CO

ALLIANCE

J B NATH AND SON

RANA ENTERPRISES

KRISHNA ENTERPRISES

chauhan syndicate

Bidder Name

RANA ENTERPRISES

ALLIANCE

RPL SYNDICATE CO

KRISHNA ENTERPRISES

J B NATH AND SON

chauhan syndicate

Rekha Enterprises

ELECTRO COMMERCIAL CO