PROVN OF MODULAR KITCHEN IN OFFRS MD ACCN AT SECTOR C AT MIL STN PATIALA

Amount

Taking down cement plaster on brick walls/ceilings built in cement mortar including raking out joints and concrete surfaces as in wall or ceiling etc. including hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L Preparing of new surfaces of walls and carrying out treatment as under a) M&L for applying acrylic wall care putty on internal surfaces of walls (thickness vary from .50 to 1.0 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after applying the putty, to make surface smooth and ready for receiving painting. b) Applying a coat of interior primer to wall surfaces by using air less spray machine (Mechanical means only) c) Applying two coats of interior emulsion paint (light shade) to wall surfaces by using air less spray machine (Mechanical means only) Note: Stages a,b,c shall be got approved by Engineer-in-charge.

M&L Preparing of new surfaces of walls and carrying out treatment as under a) M&L for applying acrylic wall care putty on internal surfaces of ceilings (thickness vary from .50 to 1.0 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after applying the putty, to make surface smooth and ready for receiving painting. b) Applying a coat of interior primer to ceiling surfaces by using air less spray machine (Mechanical means only) c) Applying two coats of interior emulsion paint (light shade) to ceiling surfaces by using air less spray machine (Mechanical means only) Note: Stages a,b,c shall be got approved by Engineer-in-charge.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.

S&F factory made Pressed steel frames made of size 105 x 60mm of MS sheet of 0.80 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified, and directed by Engr-in-Charge.

S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed by Engr-in-Charge including supply and fixing following items : (a) Mild Steel Finished Butt Hinges 100mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) complete all as specified and directed by Engr-in-Charge and the supply and fixing following items: (a) Mild Steel Finished Butt Hinges 100mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf (e) 01 no 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M & L for Powder coated (Minimum thickness of powder coating 50 micron ) Anodised aluminium frame for doors, windows, ventilators, cupboards with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

M & L for Aluminium window and ventilator, cupboards shutters with 50 micron powder coating double shutters made and to be fixed with EPDM gasket to render the glazing, air and water tight etc. and aluminium beeds in inner shutters complete fixed in all respect as specified & directed by Enginner-in-Charge. Note :- EPDM gasket shall be measured as supply only separately

S&F 4mm thick tinted glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete.

S&F stainless steel (304 grade) finished butt hinges 75mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 100mm long complete.

S&F powder coated aluminium handles 150mm complete.

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters compelte.

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

S&L of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F in reapir wall mounted kitchen Sink mixture with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F in repair for plantex quartz sink for kitchen/UV protected kitchen sink/granite double bow sink/undermounted/topmount (nano black)-609.6 x 457.2mm including waste pipe with proper drainage complete and making good disturbed portion as per existing finishes in CM 1:3 or PCC 1:2:4 complete all as directed by Engr-In-Charge.

S&F stainless steel grating 100 mm dia size round shaped for floor trap fixed in position complete all as specified .

S&F in repair wired Stainless steel plate rack made out of 0.80 mm thick stainless steel sheet of size 900x750x250mm complete all as specified . (wt not less than 3.0 kg)

Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed.

25mm thick, PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate), as in floor, sub base finished fair & even without using extra cement complete all as specified and directed .

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for Granite stone15 to 17 mm machine cut as in shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, including bull-nose the exposed sides/ lengths, set and jointed in cement slurry over & including screed of 15mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on unpoished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified.

S&F 18 mm thick HDHMR board of both side balancing (BSB) plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick HDHMR board of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

S&F TANDUM KITCHEN DRAWERS OF length 450MM TO 600MM and width 450/600/900 as per site requirment and capacity upto 45 Kg, complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 100mm long matt finished complete all as specified and directed.

S&F Stainless Steel 304 grade of pull out type like cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete all as specified and directed.

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, shelfs landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC type B-1 1:2:4 using 20mm graded mechanically crushed stone aggregate as in shelfs etc complete all as specified and directed.

Material and labour mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for Cutting holes exc 400 Sq CM but n exc 0.10 Sqm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. The work lies at 3 to 12 mtr height and the rate quoted shall be deemed to included for necessary scaffoling and safety measures.

Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

All as per Sl item No 48.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.

All as per Sl item No 48.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.

All as per item No.48.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.

S & F Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.

S & F Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.

S & F Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.

S & F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

S & F Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including frame and Louver complete all as specified and directed by Engineer-in-Charge. Note: Removal of existing exhaust fan from Bunglow and depositing to the AGE E/M store will be catered in this item.

FAVOURITE ENGINEERS (BID ID -3480694)

Buttar Construction Co. (BID ID -3481299)

AR CONSTRUCTIONS (BID ID -3480377)

ANIL KUMAR AND CO (BID ID -3481448)

Jawandha Enterprises (BID ID -3481500)

DELTA CONSTRUCTION CO (BID ID -3480604)

Arneja Builders (BID ID -3478824)