SPECIAL REPAIR TO ROAD/PATH OF OFFRS ACCN IN LANE NO. 01 TO 05 HASTING ROAD, CHURCH TO SARVATRA DWAR AND INNER PERIMETER ROAD AT CANNON OFFRS MESS ARTY BDE AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

S&F in repair cat eyes with double shank ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses, temperature resistance body of size 100mmx90mmx18mm fixed on road with bituminous adhesive as per manufactures instruction having resistant creamer coating and reflective surface complete all as specified and directed. Make-3M/Dark Eye/ Avery denson/Sinor infrastructure

M&L for cleaning dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. Make: Asian/ Nerolac/ Berger Paints. NOTE: (a) Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS. (b) The Contractor will made proper arrangement for traffic diversion and safety rules during laving of painting on Roads.

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting 30mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller for pot holes exc 30mm depth complete all as specified and directed.

M&L for premix bituminous macadam laid, rolled and compacted to required gradient and camber using binder (paving bitumen VG 30 grade) with 4% by weight of total mix all as specified (consolidated thickness 75 mm or less) all as specified in particular specifications. Note:- (i) The quoted rate shall be worked out on the basis of binder contents (bitumen VG-30 grade) of 4% by weight of total mix. (ii) Work shall be executed as per design mix as approved by GE and less bitumen shall be deducted from the quoted rate.

S&F in repair solar stud alumininum alloy powered with high efficiency solar monocrystalline solar panel (3.0 V/0.3 watt) Ni-MH rechargeble battery (1.2V/1.3AH) with 6 super bright LEDs 8mm, flash rate 60 to 70 times per minute normally, dimension-125mmx125mmx25mm (shank 67mm) including adhesive for fixing arrangement complete all as specified and directed. Make :- Dark eye Model DA 110 or Sinar Infrasture or equivalent make as approved by GE.

Taking down carefully existing solar stud of any type before laying the premixed carpet and refix the same on new road surfaces including required adhesive for fixing arrangements complete all as specified and directed.

S&F in repairs ABS body, polycarbonate lens size 1000mm dia with accessories & 7 feet long and 3 inch dia MS pole including necessary excavation and earth work and fixed in PCC (1:2:4) type B-1 of size 300mm x300mmx300mm complete all as specified and directed.

S&F in repairs Heavy duty delineator with reflective tap bands made out of MS pipe of 55mm dia wall thickness in 3mm. Length of the delineator is 1000mm. MS pipe duly powder coated. Top cap 100mm dia fitted with MS bolt. Anti Theft net 360mm length and bottom dia of the net is 100mm. Reflective tape bands 1 No Red colour, 1 No amber colour & 1 No Green colour and 2 Nos in white colour. All bands are highly reflective type XI or type IV grade. Three bands of reflective tape 2 inch width red, amber & Green & 2 bands of 1 inch width white reflective tape including necessary excavation and earthwork and fixed in PCC (1:2:4) type B1 of size 300mmx300mmx300mm complete all as specified and directed.

M&L for preparation of old painted concrete or brick or plastered surface of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint as approved complete all as specified and directed.

M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm and depth exc 50mm but n. exc. 100mm and stacking complete all as specified and directed.

M&L for 150mm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size), in two layers of 75mm thick each using lime stone, sand stone, flint or quartzite stone aggregate, spread, rolled and consolidated to gradient and camber required using 8 to 10 tonne power road roller complete all as specified and directed. Note : Each layer shall be laid and rolled separately.

M&L for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, complete all as specified and directed.

M&L for applying evenly a priming/tack coat paving bitumen VG-10 grade with bituminous primer at 10 Kg per 10 Sqm complete all as specified and directed.

M&L for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting in premix as specified for thin bituminous carpet (2cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 Cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes n.exc 30 mm complete all as specified and directed.

Demolition of cement concrete including tiles if any of any size n exc 15 cm thickness (below or above ground level) unreinforced complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material exc 250m but n.exc 500m and deposited at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded interlocking paver block in approved design and colour conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 30mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in coping in lintels upto 1.5m clear span, cills, steps, seismicand other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item04028, water troughts and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Tara Enterprises (BID ID -3453340)

M/s Engineer (BID ID -3452995)