8125/SAR-T-17/2025-26 WELCOME MAINT SERVICES TO MD ACCN B/R AND E/M SERVICES AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proofING compound ( water proof compound paid separately) complete all as specified and directed.

M & L rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying one coats of oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified and directed.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper (OBD) complete all as specified and directed.

M & L for preparation of old surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and directed.

M & L for complete removal of old decorated surfaces of walls/ceilings and applying one coat of oil emulsion distemper (OBD) over a coat 1 mm thick wall care putty of approved shade/tint complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of oil bound distemper (OBD) complete all as specified and directed.

M & L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

Demolition/Removal of existing RCC water tank including cover (Capacity not exc. 1000 Ltr) placed on roof of the Bldgs/Quarters including removal of their staging/platform complete all as specified and directed. Note : (i) Tank/staging shall be taken down after demolition in small pieces. (ii) Demolition shall be carried out carefully without damaging roof treatment. (iii) Roof treatment came out/damaged during demolition shall be made good with same specification without any extra cost. (iv) Small trees/Plantation near the tank shall be uprooted and roof treatment shall be made good.

S & F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

S & F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

S & F Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 15/20mm dia (minimum weight 142/210 gms) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as specified and directed.

M & L for 25 thick cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed.

M &L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed.

M & L coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed.

Dismentling floor , hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cement mortar (1:4) complete all as specified and directed.

M & L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed cement mortar (1:6) complete all as specified and directed.

S &F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness complete all as specified and directed.

M &L for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as specified and directed.

Dismantling of false ceiling grid any type including cover fillets complete all as specified and directed.

M & L for GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c complete all as specified and directed.

S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified& directed by Engr-in-Charge.

S & F in repair Vitreous china wash down water closet pan “Pedestal Pattern” white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium anodized hinging device including flush pipe and joints etc and connection to drain, flushing, pipe, anti-syphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete (1:2:4) type (B-0) complete all as specified and directed.

S & F in repair Vitreous China squatting pan “Orissa ” pattern size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connecting to trap and to flushing pipe, etc including making good to dismantled portion of floors with PCC (1:2:4) type B-0 complete all as specified and directed.

S & F in repairs Vitreous China Wash Hand Basin, white, flat back, size 550x 400 mm including PVC waste pipe 32 mm bore and CP waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 x 25 x 3 mm thick angle iron of required lenght, fixed to wall with PCC type B-0, including cutting for a pinning in a brackets complete all as specified and directed.

S & F in repairs Vitreous China Wash Hand Basin, white, flat back, size 630x 450 mm including PVC waste pipe 32 mm bore and CP waste coupling, chain and plug and porcelain stopper including mild steel brackets, made out of 25 x 25 x 3 mm thick angle iron of required lenght, fixed to wall with PCC type B-0), including cutting for a pinning in a brackets complete all as specified and directed.

S & F in repair valve less symphonic action type , PVC low level flushing cistern 10 litres capacity, white, with inlet, ball valve, flot and handle including PVC flush pipe 32 mm bore and mild steel brackets made out of 25 by 25 by 3 mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4), complete all as specified including taking down HL/LL PVC or Viterous China flushing cistern and making good the disturbed surfaces in cement mortar (1:3) complete all as specified and directed.

S & F in repair Plastic water closet seat cover White, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodized hinging device, complete all as specified and directed.

S & F in repairs Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, brass chromium plated, fixed in repairs, complete all as specified and directed.

S & F in repairs Chromium Plated fancy type male end Stop valves/Angle valve, screwed down high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for union ,as in repairs, complete all as specified and directed.

S & F in repairs Bib taps, ,Fancy type Chromium Plated , with crutch or butterfly handle screwed down, screwed for 15 mm bore iron pipe or brass ferrule complete all as specified and directed.

S & F in repairs pillar taps fancy type ,with capstan head Chromium Plated screwed down high pressure with or without lettered "HOT" or "COLD" with screwed shanks and fly nut screwed of iron pipes for 15 mm bore pipe complete all as specified and directed.

S & F in repair for door seal (Best quality) fixed with aluminium strip for wooden/aluminium door for insects protection complete all as specified and directed.

S & F in repair stainless steel gratings 100 mm dia with waste hole for floor trap/Nahani trap complete all as specifed and directed

S & F in repair PVC bathroom cabinet size 500mm x 400mm and width 95mm and front side looking mirror shutter fixed to wall with rawl plug complete all as specified and directed.

Disconnecting & dewatering of PVC/RCC overhead taks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity not exc 500 ltrs each including marking the date of cleaning with white paint and stencil all as required complete all as specified and directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system.

All as per Item No 53.00 here-in-above but exc 500 ltr and not exc 1000 ltrs capacity complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F steel tubing medium grade 15mm bore with all fittings fixed complete to walls /ceilings and or laid in floor complete all as specified and directed.

S & F steel tubing medium grade 20mm bore with all fittings fixed complete to walls/ceilings and or laid in floor complete all as specified and directed.

S & F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed.

S & F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe complete all as specified and directed.

S & F in repair Brass chromium plated towel rack 24 " long, fixed in position with steel screws complete all as specified and directed.

S & F in repair brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed.

S & F in repair brass chromium plated telephonic hand shower with 1.50m long stainless steel braided flexible tube with nut & nipple & hook suitable for wall mixer & screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mmx125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

S & F in repair shower rose, PVC suitable for 15mm bore pipe with swiveling joints complete all as specified and directed.

S & F bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe fixed in repair(Min. wt 90 gms) complete all as specified and directed.

S & F in repair chromium plated Brass health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings complete all as specified and directed.

S & F in repairs wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including over head shower etc complete all as specified and directed.

S&F in repairs glass corner shelf complete all as specified and directed.

S&F in repairs glass shelf rectangular type complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed.

Taking down carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc. removing from site for taking credit and making good disturbed surface of wall, floor etc complete all as specified and directed.

M & L for replacement of concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes (piano type or modular type as required) including earth dolly with plastic laminated sheet top cover (cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs, round sheet and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :- One light / fan point controlled by one way switch

All as per Item No 73.00 here-in-above but for one 5 Amp socket outlet on independent board complete all as specified and directed.

All as per Item No 73.00 here-in-above but for one 5 Amp socket outlet on same board complete all as specified and directed.

All as per Item No 73.00 here-in-above but for one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per Item No 73.00 here-in-above but for one light point controlled by two 2-way switch complete all as specified and directed.

All as per above Item No 73.00 here-in-above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

M & L for replacement of point wiring in casing caping on sufraces of wall/ceiling floor etc complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade with PVC rectangular block (Piano/modular type as directed) of suitable size including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and as directed for the followings :- One light / fan point controlled by one way switch

All as per Item No 79.00 here-in-above but for one 5 Amps socket out let point controlled by one 1-way switch on independent board complete all as specified and directed.

All as per Item No 79.00 here-in-above but for one 5 Amps socket out let point controlled by one 1-way switch on same board complete all as specified and directed.

All as per Item No 79.00 here-in-above but for one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per Item No 79.00 here-in-above but for one light point controlled by two 2-way switch complete all as specified and directed.

All as per above Item No 79.00 here-in-above but for using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

M & L for replacement of existing conduit point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade drawn through existing conduitwith MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover ( cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :- One light / fan point controlled by one switch.

All as per Item No 85.00 here-in-above but for one bell point controlled by one bell Push complete all as specified and directed.

All as per Item No 85.00 here-in-above but for one 5 Amps socket out let point controlled by one switch on independent board complete all as specified and directed.

All as per Item No 85.00 here-in-above but for one 5 Amps socket out let point controlled by one switch on same board complete all as specified and directed.

All as per Item No 85.00 here-in-above but with 2.5 Sqmm nominal cross sectional area electric cable for 15 Amps socket outlet point controlled by one switch on independent board complete all as specified and directed.

S & F in replacement switch piano type 5 amp one way ISI Marked complete all as specified and directed.

S & F in replacement switch piano type15 Amps one way ISI Marked complete all as specified and directed.

S & F in replacement socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S & F in replacement socket outlet 2-in-1, 6 pin 5 amp and 15 amps all as specified and directed.

S & F in replacement socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed.

S & F in replacement socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed.

S & F in replacement switch 6 amps modular type one one way complete all as specified and directed.

S & F in replacement switch 16 amps modular type one one way complete all as specified and directed.

S & F in replacement electronic fan regulator flush type single module ISI marked complete all as specified and directed.

S & F in replacement bell push flush type 5 amp one way ISI Marked complete all as specified and directed.

S & F in replacement modular type bell push 6 amp one module ISI Marked complete all as specified and directed.

S & F in replacement Bell, DING DONG AC 230 Volts single pole type complete all as specified and directed.

S & F in replacement of Lamp holder bakalite type with back plate suitable for batten fittings complete all as specified and directed

S & F in replacement of ceiling rose PVC/polycarbonate, isolated body 63 x50mm three terminals complete all as specified and directed.

S & F in replacement of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and directed. Note: Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.

S & F in replacement of sub main wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of 6.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: Two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.

S & F in replacement of Regid non-metallic PVC conduit 25 mm (external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers lock nuts, saddles, pipe hook etc complete all as specified and directed.

All as per Item No 105.00 here-in-above but of size 20mm complete all as specified and directed.

S & F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V including fixing in new location with connection of circuit and submain as per site requirement complete all as specified and directed. Note: (a) MCBs are to be measured and paid seperately. (b) Make of MCBs and DB should be same. (c) Extra circuit length where DBs are to be shifted from existing location to new location shall deemed to be included in the quoted rate.

S & F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 8 ways 240 V including fixing in new location with connection of circuit and submain as per site requirement complete all as specified and directed. Note: (a) MCBs are to be measured and paid seperately. (b) Make of MCBs and DB should be same. (c) Extra circuit length where DBs are to be shifted from existing location to new location shall deemed to be included in the quoted rate.

S & F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 4 ways 240 V, IP 43 including fixing in new location with connection of circuit and submain as per site requirement complete all as specified and directed. Note: (a) MCBs are to be measured and paid seperately. (b) Make of MCBs and DB should be same. (c) Extra circuit length where DBs are to be shifted from existing location to new location shall deemed to be included in the quoted rate.

S & F in replacement of single pole and neutral enclosure with 2 pin and metal earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S & F in replacement MCB SP 5 to 32 Amps, 240 volts curve 'B',breaking capacity 10KA, complete all as specified and directed.

S & F in replacement MCB SPN 16 to 40 Amps, 240 volts, curve 'B', breaking capacity 10KA, compelte all as specified and directed.

S & F in replacement MCB SPN 50 to 63 Amps, 240 volts, curve 'B', breaking capacity 10KA, complete all as specified and directed.

S & F in replacement of modular switch 2 way, 6 Amp,1 module ISI Marked complete all as specified and directed.

S & F in replacement of modular Fan Regulator fan step regulator,120W- single module ISI Marked complete all as specified and directed.

S & F in replacement of Piano type switch 2 way, 5 /6 Amp,1 module ISI Marked complete all as specified and directed.

S & F in modular blanking plate, 1 module ISI Marked complete all as specified and directed.

S & F in replacement metal flush box 3 module complete all as specified and directed.

S & F in replacement metal flush box 6 module complete all as specified and directed.

S & F in replacement metal flush box 4 module complete all as specified and directed.

S & F in replacement for white cover plate with frame, 3 module complete all as specified and directed.

S & F in replacement for white cover plate with frame, 6 module complete all as specified and directed.

S & F in replacement for white cover plate with frame, 4 module complete all as specified and directed.

S & F in repair of Earthing to DBs with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 4.0 mm galvanised iron wire by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead shall be protected by GI pipe 15 mm dia medium grade and connected to distribution board including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.

M & L in repair for Earth continuity conductor or main earthing lead of 4.0 mm galvanized iron wire, buried in ground or fixed to wall in and including 15 mm bore GI pipe medium grade for protection of earth wire complete all as specified and directed.

S & F in replacement enviroment friendly,ultra modern,energy saving surface mounted decorative 10 Watt LED bulkhead fitting with polycarbonate housing ,high efficient LEDs with opal diffuser and IP65 protectio, lumen efficacy 85 lm/watt with colour temerature 6500K, THD≤ 20 CRI>80,2.5 kV surge protection all as specified and directed.

S & F in replacement 09 watt 3 star LED bulb with B22 Base cap, 1200 lumens ,Colour rating Index 80,colour temp F 6500K,satrtup time less than 2 sec,In built surge 3.0 kV, voltage range 140V to 270 V, Lamp life 15000 hours complete all as specified and directed.

S & F in replacement of enviroment friendly indoor decorative 20 Watt LED polycarbonate Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all as specified and directed.

S & F in replacement of enviroment friendly indoor decorative 9/10 Watt LED polycarbonate Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all as specified and directed.

S & F in repair plastic laminated bakelite sheet cover of size 12" X 14" including cutting holes for switches, sockets etc as pre requirement including fixing with machine screws and washer complete all as specified and directed.

All as per Item No 131.00 here-in-above but of size 8" x 10" complete all as specified and directed.

All as per Item No 131.00 here-in-above but of size 8" x 6" complete all as specified and directed.

All as per Item No 131.00 here-in-above but of size 7" x 4" complete all as specified and directed.

All as per Item No 131.00 here-in-above but of size 4" x 4" complete all as specified and directed.

M & L for fixing PVC gang box for mounting one switch and one socket of 5 Amps including all accessories complete all as specifies and directed.

M & L for fixing PVC gang box for mounting one switch and one socket of 15 Amps including all accessories complete all as specifies and directed.

S & F of PVC Casing capping 20/25mm ISI marked complete all as specified and directed.

S & F in replacement of Cable PVC insulated unsheathed single core 1100V FRLS grade stranded flexible copper conductor of size 1.5 sqmm complete all as specified and directed.

S & F in replacement of Cable PVC insulated unsheathed single core 1100V FRLS grade stranded flexible copper conductor of size 2.5 sqmm complete all as specified and directed.

S & F in replacement of Cable PVC insulated unsheathed twin core of 23/0.0076 size flexible copper conductor complete all as specified and directed.

S & F in replacement of Cable PVC insulated unarmoured three core 1100V FRLS grade stranded flexible copper conductor of size 2.5 sqmm complete all as specified and directed.

S & F 25 mtr long 2.5 cm wide and atleast 125 mm wall thickness self adhesive PVC insulated electrical tape roll of good quality complete all as specified and directed.

S & F in replacement of PVC round shape junction box cover of suitable size complete all as specified and directed.

S & F in replacement of enviroment friendly indoor decorative 5/6 Watt LED polycarbonate Batten with opal diffuser , operating voltage range 140v to 270 V, , lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, including all accessaries all as specified and directed.

S & F in replacement of 12 watt 2 star LED bulb with B22 Base cap, 1200 lumens ,Colour rating Index 80,colour temp warm white ,satrtup time less than 2 sec,In built surge 3.0 kV, voltage range 140V to 270 V , Lamp life 15000 hours complete all as specified and directed.

S & F in replacement of Double door distribution board 4 way TPN when MCB to be used as incomer powder coated with Bus Bar 200 Amps, 415 V, Earth Stud, Din Rail, complete all as specified and directed. Note: (a) MCBs are to be measured and paid seperately. (b) Make of MCBs and DB should be same.

S & F in replacement MCB TPN 50 to 63 Amps, 415 volts, curve 'B', breaking capacity 10KA, complete all as specified and directed.

BRIJ CONSTRUCTIONS (BID ID -3340313)

RAJAN TRADERS (BID ID -3354043)

SUBHASH CHAND CONTRACTOR (BID ID -3345481)

NAQLI LAL SHARMA AND ARUN SHARMA (BID ID -3345950)

SINGH CONSTRUCTION CO. (BID ID -3344101)