REPAIR / REPLACEMENT OF PERIMETER LIGHTS JUNCTION BOX / LT CABLE ALONGWITH RE-LAYING / RE-ROUTING OF CABLE AND REPLACEMENT OF LT PANEL / MCCBs / TIMER/ FEEDER PILLER BOX AND CERTAIN E/M, WORK AT 901 SU AF STN NATHATOP

Amount

M&L for LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K, SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified Note for items ser no 1 to 6 :- (i) T&P required for repair/mantenance such as ladder, Crane vehicle, hydra, menpower etc, are inclusive in the item rate.

Repair and replacement of LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K,SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified

Repair and replacement of LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K, SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified

Repair and replacement of LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K,SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified

Supply & fixing of 150 watt LED light energy saving and enviromental friendly long life versatile pressure dia cast aluminium IP66 roadway luminaire with high power LED as light source of capacity 150 watts SPD of voltage rating > 10kv ,5700 /3000 Degree kelvin with suitable driver and surge protection and all standard accessories etc complete all as specified including taking down old.

Supply and fixing in repair LED Building light of 30 watt, IP66 power coated pressure die cast aluminium compact high power LED building light with heat resistant toughened glass complete with GI pipe bracket light grade 1.2m long of suitable bore fixed on wall with GI clamps, nuts and bolts of suitable size complete all as specified and as directed.

S & F in repair street light bracket made out of 40/50 mm dia GI heavy grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 50 x 6 FI and nut bolts and washers all as specified and directed including taking down old.

Supply and fix 1.5 Sqmm 2 core cable, PVC insulated and PVC round sheathed, copper conductor(flexible) industrial cable, 1100 volt, confirming to IS :694 including replacement of old unsv cable. Note- (i) Cable is reqd to be connected from street light to junction box with proper lugs.

LT Cable junction box outdoor shall be made out of Polycarbonate with glass fiber reinforced than 205mm x 255mm x 112 mm(the cable size upto 25 sqmm). The polycarbonate junction box shall be environmental friendly, recyclable, halogen & silicon free, anti acid & anti corrosive. The Junction Box shall be rated for Degree of ingress Protection IP 66 in accordance with IEC 60529.Weatherproof, UV resistant. The gasket material of junction box shall be Polyurethane and the gasket shall be internally embedded. The Junction Box shall be complies with requirements of the standards IEC 60998. The Junction Box with 25Amp Connectors or Terminal Trip or Bus Bar. The Junction Box / Enclosure shall be tested as per IEC including one No. 4 pole connector and chromium plated clamps and nut bolts, cable glands with lock nuts of 2 Nos for each box complete all as per manufacturer’s Make : Cat Part :- KF 2525 B of Hensel/Siemens/GE Power/Rittal/Legrand

Supply and fixing of GI tubing medium grade 40 mm bore cut to size and fixed along the pole /road cable protection all as required at site or directed by Engineer-in -charge including taking down old.

Supply and fixing of GI tubing medium grade 80 mm bore cut to size and fixed along the pole /road cable protection all as required at site or directed by Engineer-in -charge including taking down old.

Supply and Laying Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armoured, cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade and connecting and testing in trenches, under floors/ roads or on walls complete including taking down all as specified and directed of following sizes :- (Note 1.: Earth work, excavation shall be measured & paid separately under respective item of Schedule and wherever cable laying on walls and uses of thimbles etc rates shall deemed to be included in the quoted rates).

10 Sqmm, 4 core cable

16 Sqmm,4 core cable

25 Sqmm, 3½ core cable

35 Sqmm, 3½ core cable

50 Sqmm, 3½ core cable

95 Sqmm, 3½ core cable

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays and getting out in any type of soil, all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and as directed by Engineer-in-Charge.

M & L for Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge. Note: Punned thickness of sand shall be measured.

Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.

S & F in repair for MCCB 3 Pole, 415 V, Fixed type,thermal magnatic load ICS100% of Icu as per IEC 60947-II, 0.8 ln to 1ln, 63 Amps with breaking capacity 25 KA complete all as specified and directed. Make:Indoasian/Standard/Havells/Schneider/ABB or equivalent as approved by GE .

S & F in repair for MCCB 3 Pole, 415 V, Fixed type,thermal magnatic load ICS100% of Icu as per IEC 60947-II, 0.8 ln to 1ln, 100 Amps with breaking capacity 25 KA complete all as specified and directed. Make:Indoasian/Standard/Havells/Schneider/ABB or equivalent as approved by GE.

S & F in repair for MCCB 3 Pole, 415 V, load ICS100% of ICU, 0.8 ln to 1ln, 160 Amps with breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

S & F in repair for MCCB 4 Pole, 415 V, load ICS100% of ICU, 0.8 ln to 1ln, 100 Amps with breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

S & F in repair for MCCB 4 Pole, 415 V, adjustable type, thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 160 Amps with breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

S & F in repair for MCCB 4 Pole, 415 V, adjustable type, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 200 Amps with breaking capacity25 KA complete all as specified and directed. Make Indoasian /Standard/Havells/Schneider/ABB or equivalent as approved by GE.

S & F in repair for MCCB 4 Pole, 415 V, adjustable type, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 400 Amps with breaking capacity 36 KA complete all as specified and directed. Make : Indoasian Standard/Havells/Schneider/ABB or equivalent as approved by GE.

Supply and fix heat shrinkable End termination kits and accessories of following capacities and type:-

Outdoor/indoor 120 to 150 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable

Outdoor/indoor 95 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable

Outdoor/indoor 35 to 50 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable

Supply and fix heat shrinkable straight through joint kit and accessories of following capacities and type:-

Straight through joint kit indoor/outdoor al conductor cable of size 150 to 185 Sqmm and 3.5/4 core

Straight through joint kit indoor/outdoor al conductor cable of size 25 to 35 Sqmm and 3.5/4 core

Straight through joint kit indoor/outdoor al conductor cable of size 50 Sqmm and 3.5/4 core

Straight through joint kit indoor/outdoor al conductor cable of size 95 Sqmm and 3.5/4 core

Supply, installing, testing and commissioning CPRI approved factory made and tested LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system. Shall be dust and vermin proof, protection class (IP-54) and made of 3.15 mm thick CRCA SHEET & suitable frame work/ support made out of MS Section of size 50 x 50 x 6 mm, front opening type with space for cable entry from back side of the panel, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete and PCC (1:3:6) type C-2 foundation of size including connections of all out going/in coming existing cables of any size by drawing /digging out cable inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size of copper lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board and taking out of old skelton type panel with control switches complete all as specified and as directed by Engr-in-Charge. including the following items incorporated same panel and removed old unserviceable panel.The scope of work also comprising of the following:- BUS BAR CHAMBER :- (a) 400 Amp insulated copper strip of length not less than 60 cm and 03 phase and neutral, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER :- (i) Digital Volt Meter, 96X96mm, flush type rated 0-500V, with Volt meter push button type- 01 Set. (ii) Digital Amp Meter, 96X96mm, flush type rated 0-250A, with Amp meter push button type- 01 Set. (iii) C.T's 250/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (iv) Red,Yellow,Green Phase indicating Lights LED type 220V AC- 1 Set. (Set of three).B8 Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. INCOMING SUPPLY :- (i) MCCB 400 Amps 25 KA ,ICS 100% of ICU, 0.8 ln to 1 ln, 4 Pole with Thermal Magnetic trip, adjustable type overoad setting, 415 volts , frequency 50 Hz,=01 OUTGOING SUPPLY :- (i) MCCB 200 Amps 16 KA , 4 Pole with Thermal Magnetic 415 volts , 50Hz,=02 Nos., (ii) MCCB 100 Amps 16 KA , 4 Pole with Thermal Magnetic 415 volts , 50Hz,=02 Nos., (ii) MCCB 63 Amps 16 KA , 4 Pole with Thermal Magnetic 415 volts , 50Hz,=02 Nos. Make of MCCB:-L&T/ Siemens / Legrand The panel manufacturer should have following Govt. Approved Certificates: 1. Panel shall be installed at least 45 cm above ground 2. All civil/electrical work & material is deemed to be included in the quoted rates 3. Drawing of panel shall be got approved from GE.

M&L for cutting the existing cable from loop near the panel and making end termination with aluminium lugs of suitable size without jointing kit with cable glands suitable for LT U/G cable of following sizes:

120 x 3.5 to 185 x 3.5 sqmm .

50 x 3.5 to 95 x 3.5 sqmm .

Trimming of tree in vicinity of electric supply pole/street light pole/solar modules & depositing at various places n exc 50m all as directed by Engineer-in-Charge.

Painting to steel tubular swaged poles 9/11 mtr long complete (except above the perimeter wall portion) including all MS work mounted on pole, earth protection & (if exists) with one coat of aluminium paint and synthetic enamel paint from top of perimeter wall / PCC coping and numbering of poles with white synthetic enamel paint on black back ground complete all as specified and directed by Engr-in-Charge

Earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth electrode burried directly in ground (earth pit not less than 3.75 Meter deep below ground level) with top edge of the earth plate not less than 2.5mtr below ground level using copper earth strip 20 x 3 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including brazing etc of earth electrode and earth wire by means of welding, all as directed including providing watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion. Note : (i) Extra excavation of earth work more than 3.50 mtr shall be meassured and paid separately. (ii) The grid of earthing trhough earth strip to achieved earth resistance less than 01 ohm to05 ohm shall be deemed into the quoted rate and no extra payment shall be made to contractor. (iii) The test point shall be made after the grid of earthing and algebric sum of of strip shall be measured after 7.5 mtr earth pit.The strip beyond the total sum shall be paid seperately (a) Soil shall be provided by the contractor from outside the MOD land for refilling the remaining portion of earth pit for increasing soil conductivity without any extra cost to the Govt. (b) GI protation pipe shall be procuded and installed and shall be measured and paid seperately. (c) Earthing will be carried out in presence of users and MES rep with entire satisfaction. (d) The ground enhansing material (GEM) / chemicals shall be added with soil and the GEM/chemicals shall be measured and paid seperately.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing strip 20x3mm copper strip, insulator,clips etc. complete all as speciefed and as directed.

Automatic street light switch NATURE SWITCH for automatic switching of streets lights based on lux level of natural light. The sensor (nature switch ) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compund (sintex make SMC Junction Box or equivalent as approved by GE ) conforming to IP-54. The contactor, MCB and circuit wiring shall be suitable enough to take load of 8 KW single phase load /8 KW load equally distributed over 3-phase (7 KW/phase), contactor rating 25 Amps, 4 pole and MCB (single pole) rating 32 amps (SP-3 Nos) complete including sheet metal enclosure with stand made of suitable size angle iron and grouting of enclosure using cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) all as specified and directed by Engineer-in-Charge including taking down old. Make :- Healer and Model No. SWADEEP-02EC8KW 3 PHASE .

Supply and fixing of DWC HDPE tubing 80 mmConforming to IS 16205 bore for open/underground laying cable, cut to size and making the tubing for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specified and directed by Engr-in-Charge. Note :- (a) The using of GI Clamp in the wall/drainage rate are deemed to be included in the quoted rate. (b) Drawing existing cable through DWC pipe shall be deemed to be included in the quoted rates.

Supply and fixing of DWC HDPE tubing 50 mmConforming to IS 16205 bore for open/underground laying cable, cut to size and making the tubing for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specified and directed by Engr-in-Charge. Note :- (a) The using of GI Clamp in the wall/drainage rate are deemed to be included in the quoted rate. (b) Drawing existing cable through DWC pipe shall be deemed to be included in the quoted rates.

Supply and fix 120 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv luminaire engergy saving, environmental friendly long life with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make Wipro/Crompton or equivalent approved by GE

Supply and fix 70 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv engergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- Wipro/Crompton or equivalent approved by GE

Supply and fix 100 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv engergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- Wipro/Crompton or equivalent approved by GE

S & F in repair of Change Over 400 Amps, 415 V, as per existing change over suitable of size with connected assosieries Complete all as specified and as directed.

S & F in repair of Change Over 600 Amps, 415 V, as per existing change over suitable of size with connected assosieries Complete all as specified and as directed.

S & F in repair of MCB TPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including accessories therein & disposing from site complete all as specified and as directed.

S & F in repair of MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including accessories therein & disposing from site complete all as specified and as directed.

Supply, installation, testing, commissioning & electrically connected feeder pillar outdoor type, single door compartmentized with looking arrangement canopy at top weather proof, verman/dust proof of suitable size cubical type factory made of CRCA MS sheet 3.15 mm thick machine pressed of size 60x60x40 cm & angle iron frame 40x40x6 mm for legs and including grouted in PCC 1:2:4 type B1 (20 mm graded stone aggregate) suitable 440 volts AC 3 phase 4 wire bus bar 4 pole made out of suitable size copper strip capacity 400 Amps Fully mounted on procelain insulator enclosed chamber with open able shutter both sides comprising with following complete all as specified.

M & L for brazing work with GI brazing alloy rod with help of oxygen and LPG cylinder using required copper strip of size 20 mm x 3 mm upto 30 cm length along with cleaning work of strip with descaling solution /emery paper which are laid as roof/down conductor on any height of building complete all as specified and directed.

M & L for brazing work withGI Earthing Strip with help of oxygen and LPG cylinder using required Galvanised iron of size 32 mm x 6 mm upto 30 cm length along with cleaning work of strip with descaling solution /emery paper which are laid as roof/down conductor on any height of building complete all as specified and directed.

M/S M P Construction Co

MOHAN LAL AND SONS

MAHAJAN TRADING CO

RANBIR ENTERPRISES

M/S DHARAM & SONS ENTERPRISES

PROACH ASSOCIATES BUILDERS & ENGINEERS