Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical BHUPATINAGAR NEAR BLRO OFFICE PURBA MEDINIPUR PIN 721444 | MEDINIPUR EAST | WEST BENGAL | 721444 | Accepted-Technical TECHNICALLY QUALIFIED |
| 2 | Rejected-Technical | Rejected-Technical TECHNICALLY DISQUALIFIED |
| 3 | Rejected-Technical VILL PO BAINAN PS BAGNAN PIN 711303 DIST HOWRAH | BAINAN | HOWRAH | WEST BENGAL | 711303 | Rejected-Technical TECHNICALLY DISQUALIFIED |
Tender Value
₹1.7 L
EMD Value
₹3,305
Closing Date
25 May 2026, 6:00 pmClosed
EE/CID/PURBA MEDINIPUR
EE/CID/PURBA MEDINIPUR
Maintenance and repair of different sluices over Panipia Khal, Mirzapur khal and O.C.C along with oilling and greasing at GP- Nayput, Badalpur and Haipur Block- Contai- I , Dist. Purba Medinipur. (2nd Call)
2026_IWD_1024300_3
WBIW/EE/CID/e-NIT-02/2026-27
Open Tender
CIVIL WORKS
Percentage
45 days
Contai- I
Please refer Tender documents.
6 documents required · 6 mandatory
₹3,305
3 Jul 2026
18 May 2026
28 May 2026
18 May 2026
25 May 2026
18 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil. | 300 | CUM | 129.91 | ₹38,973 |
| 2 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). | 2,620 | EACH | 7.15 | ₹18,733 |
| 3 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and ewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in- harge (cost is excluding the cost of any types of filling materials).
NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag. | 2,620 | EACH BAG | 8.34 | ₹21,850.8 |
| 4 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. | 2,620 | EACH BAG | 3.58 | ₹9,379.6 |
| 5 | Taking out sluice gate draw shutter gearing arrangements & pedestal including
where necessary. (a) Up to 4 sqm.
(i) Taking out and refitting the same. | 9.12 | SQM | 377.8 | ₹3,445.54 |
| 6 | Taking out Pedestal and refitting the same with new nuts & bolts as necessary (nuts & bolts to be supplied by the contractor at his own cost) (a) Taking out and refitting the same. | 2 | EACH | 480.3 | ₹960.6 |
| 7 | Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineer- in-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. | 502.31 | KG | 100.11 | ₹50,286.25 |
| 8 | Supplying / Replacing Gun Metal Bush for screw gearing arrangement required for hanging arrangement of draw shutter and fitting & fixing with the screw gearing arrangement for operating the draw shutter by taking out the old screw gearing arrangement and Gun Metal bush etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.) | 2 | EACH | 7,600.11 | ₹15,200.22 |
| 9 | Oiling, cleaning & greasing the regulator gate & gate parts including guide channel, top runner, pedestal block, gear rods, wheel, fish plate etc. with sufficient lubricant as and when necessary as directed by the Engineer-in-charge including cost of all materials to site complete. | 15 | EACH SET | 427.86 | ₹6,417.9 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
cancelled_1.pdf
pdf • 0.56 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.41 MB
Tendernotice_2.pdf
PDF • 0.55 MB
BOQ_2518104.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .