Improvement of Toilets of Adm Block at Ftr HQ (Spl Ops) BSF Odisha at Bangalore (SH Electrical Work)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). a) 18-22 watt

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.. i) 3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.. i) 6 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. i) 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. i) 6 pin 15/16 A socket outlet

Supplying, installing, testing and commissioning of pre wired decorative 10 watts LED mirror fittings complete with electronic driver and all accessories directly on existing wall including connection, including dismantling of old fixture etc as required

Supply, Installation, testing and Commissioning of Exhaust fan of 300 mm sweep metallic body, 1400 RPM, AC 230V , 50 Hz, single phase complete with all necessary accessories for completing installation as per specification with 1.5 sq mm FRLS copper wire etc as required. ( Havells/CG /Orient/Usha ) make

Providing and fixing fully automatic, wall mounted ABS Plastic Automatic, Touchless Wall Mounted, Quick Dry 40, Durable Heavy Duty Machine, Hand dryer suitable to operate on 240 volts, single phase 50 hz, A.C. power supply 1500 W, air flow wind velocity 16m/sec or as per Manufacturer's specifications). Make- Euronics /Dolphy/Plantex/Askon or equivelent reputed make