REPAIR MAINT OF HOT WATER APPLIANCES SOLAR WATER HEATER AND ALLIED WORKS UNDER AGE EM AT GE FAIZABAD

Amount

Taking down existing defective electric geysers of any make and any capacity (25/50 Ltr) vertical OR horizontal from its location servicing, by opening of pipe and disconnecting all electrical connection, cleaning of tank after opening of its assembly at site, cleaning of assembly pipe to avoid its choke up, checking of defective parts, necessary repair and replacement of defective parts to make the equipment functional to the entire satisfaction of engineer in charge and refixing geyser in its position including all electrical and pipe connection to geysers, testing and commissioning complete (For replacement of defective parts, supply only of parts as included under relevant item as below as required at site shall be measured and paid separately under item below. Note :- (i) The contractor will receive geyser complaints daily from MES service cell and complete the user complaints as directed by Engr-In-Charge. (ii) Complaints will be completed day to day, within 24hours failing which recovery shall be made from contractor @ Rs. 400.00 per complaint per day from reciept of complaint to actual date of completion of complaint . The decision of GE in this respect shall be final and binding.

Supply only Geyser element 1500 watt ISI marked approved by GE.

Supply only geyser element 2000 watt ISI marked approved by GE.

Supply Thermostat suitable for 25/50 ltrs geysers ISI marked approved by GE.

Supply only Indicating lamp(green/red) with wire and glass sleeves ISI marked approved by GE.

Supply only PVC connection pipe 45cm long, 15 mm bore with PTMT nuts (union) as inlet and outlet pipe for hot and cold water of Geyser ISI marked approved by GE.

Supply only PVC connector pipe 90cm long, 15 mm bore with PTMT nuts (union) as inlet and outlet pipe for hot and cold water of Geyser ISI marked approved by GE.

Supply only housing assembly for 25 Ltr Capacity ISI marked approved by GE.

Supply only housing assembly for 50 Ltr Capacity ISI marked approved by GE.

Supply only Safety valve (dead plug) small ISI marked approved by GE.

Supply only Safety valve (pressure release valve) ISI marked approved by GE.

Supply only Gasket for 25 Ltr Capacity assembly ISI marked approved by GE.

Supply only Gasket for 50 Ltr Capacity assembly ISI marked approved by GE.

Supply only Glass wool

Supply only Inner copper tank complete with inlet/outlet nipple for 25 Ltr capacity ISI marked approved by GE.

Supply only Inner copper tank complete with inlet/outlet nipple for 50 Ltr capacity ISI marked approved by GE.

Supply only glass line unique polymer coating inner tank complete with inlet/outlet nipple for 25 Ltr capacity ISI marked approved by GE.

Supply only bottom outer body cover for 25 Ltr capacity ISI marked approved by GE.

Supply only bottom outer body cover for 50 Ltr capacity ISI marked approved by GE.

Supply only top outer body cover for 25 Ltr capacity ISI marked approved by GE.

Supply only top outer body cover for 50 Ltr capacity ISI marked approved by GE.

Supply only outer shell of complete MS sheet duly painted for 25 Ltr capacity ISI marked approved by GE.

Supply only outer shell of complete MS sheet duly painted for 50 Ltr capacity ISI marked approved by GE.

S&F in repair Anchor bolts 5" length with nut and washers including making of holes in wall and making good as per existing speficification.

S & F plug and DBOXx MCB protected socket complete 20A MCB single pole, 240 volts complete all as specified. Make: Havells/ Legrand / C&S

S&F in repair galvanised iron pipe, 15mm bore, medium grade, with all fittings & fixed complete to wall, ceiling or laid in floors all as specified and directed. Make: Jindal/ Tata or as approved

S&F in repair stop valves 15 mm bore, brass chromium plated, concealed, screwed both ends for pipes or for unions, fixed in repairs, including making good to match with existing surface.

S&F in repair plug top 3 pin,15 Amps Make:- Anchor or equivalent as approved GE.

S&F 100 Ltrs capacity PUF insulated tank suitable for flat plate collector system complete all as specified ISI marked approved by GE.

S&F MS powder coated stand for 100 ltr tank of flat plate collector system complete all as specified ISI marked approved by GE.

S&F solar flat plate collector of 100 LPD capacity complete all as specified ISI marked approved by GE.

S&F collector leg (front) suitable for flat plate collector system of 100 LPD complete all as specified.

S&F collector leg (rear) suitable for flat plate collector system of 100 LPD complete all as specified ISI marked approved by GE.

S&F collector to tank inter connecting synthetic rubber hose suitable for flat plate collector system of 100 LPD complete all as specified.

S&F hose clip suitable for flat plate collector system of 100 LPD complete all as specified.

S&F EPDM gasket with centre hole suitable for flat plate collector system of 100 LPD complete all as specified ISI marked approved by GE.

S&F dummy gasket (EPDM) suitable for flat plate collector system of 100 LPD complete all as specified ISI marked approved by GE.

S&F dummy flange suitable for flat plate collector system of 100 LPD complete all as specified ISI marked approved by GE.

S&F M6x25MM SS-304 Nut bolt with flat and spring washer suitable for flat plate collector system of 100 LPD complete all as specified. ISI marked approved by GE.

S&F 13x8 PAN head screw suitable for flat plate collector system of 100 LPD complete all as specified.

S&F 100 Ltrs capacity PUF insulation tank with tube hole suitable for evacuated tube collector system complete all as specified. ISI marked approved by GE.

S&F MS powder coated stand for 100 ltrs tank suitable for evacuated tube collector system of 100 LPD complete all as specified. ISI marked approved by GE.

S&F 58mm(D) x 1800mm(L) vacuum glass tube suitable for evacuated tube collector system of 100 LPD complete all as specified. ISI marked approved by GE.

S&F neoprene gasket (58ID) suitable for evacuated tube collector system of 100 LPD complete all as specified. ISI marked approved by GE.

S&F tube holder plastic suitable for evacuated tube collector system of 100 LPD complete all as specified. ISI marked approved by GE.

S&F black rubber ring suitable for evacuated tube collector system of 100 LPD complete all as specified.

S&F electrical back-up heater with inbuilt thermostat 2 KW suitable for flat plate collector/evacuated tube collector system of 100 LPD complete all as specified. ISI marked approved by GE.

S&F in replacement 15 mm dia heat proof ( pre insulated ) composit pipe for hot water distribution line with all fittings fixed to wall or ceiling/floor including taking down old unserviceable GI pipe complete all as specified ISI marked approved by GE.

All as per item No 48 here in before but 20 mm bore.

All as per item No 48 here in before but 25 mm bore .

S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends of iron pipe of size 20 mm dia complete all as specified.

S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends of iron pipe of size 25 mm dia complete all as specified.

M & L for cleaning and descaling water circulation system of rotational moulded polyethyline water storage tank upto 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixing in position complete all as specified.

S&F in replacement ball brass valves, high pressure, with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed of size 20mm complete all as specified.

S&F in replacement ball brass valves, high pressure, with polthene float and flynut complete screwed for iron pipe or brass ferrule and fixed of size 25mm complete all as specified.

S&F in replacement bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia complete all as specified.

M & L for sub main wiring with two run of 1.5 sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequate size size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified.

M & L for sub main wiring with two run of 2.5 sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequate size size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified.

M & L for sub main wiring with two run of 4 sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequate size size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified.

M & L for sub main wiring with two run of 6 sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequate size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified.

M & L for sub main wiring with two run of 10 sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequate size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified.

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S&F epoxy powder coated MCB, DB, double door SPN 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S&F epoxy powder coated MCB, DB, double door SPN 2 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S & F MCB SPN, 40 Amps, 230 Volts C series 10 KA, including necessary connection complete all as specified and as directed.

S & F MCB SPN, 32 Amps 230 Volts C series 10 KA, including necessary connection complete all as specified.

S & F MCB SP 6 to 32 Amps, 230 Volts C series 10 KA, including necessary connection complete all as specified.

Khan Brothers

m/s allied enterprises

MISRA TRADING CORPORATION

Hindustan Power Corporation

A ONE ENGINEERING

M/S AVADH ENTERPRISES

His And Her Enterprises

Super Automobiles