Repair Replacement of DBs Submain Wiring Earthing Building Security Lights and Misc Work at OTM and Md Accn at Tarapore Enclave Rangpuri IHQ MoD Army HQ DGIS CAMS 1 CBPO PLI 10 Jakli Khyber Line IML Vasant Range Colony 1 CBPO Officer Qtr and WARDEC

Amount

S&F in replacement MCCB 3 pole 200 Amp 36 KA 415 Volts with breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCCB 160 Amps 3 pole 415 volts fixed type with breaking capacity 25 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCCB 125 Amps 3 pole 415 volts fixed type with breaking capacity 16 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCB TPN/4 Pole 63 Amps 415 Volt, 'C' Series 10 KA as per site requirment complete all as specified and directed by Engr-in-Charge.

S&F in replacement for MCB TPN 3 pole 63 to 100 Amp 415 Volt, 'C' Series 10 KA 'C' as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in replacement for MCB SPN 40 to 63 Amp 240 Volt, 10 KA 'C' all as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in replacement for MCB SPN 32 Amp 240 Volt, 10 KA 'C' all as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCB SP 6 to 32 Amp 240 Volts, 10 KA, 'C' curve all as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in replacement VTPN DB 4 way double door type for fixing MCCB upto 200 Amps as incomer and MCB as out going with metal door and IP 43 protctions & connecting complete all as specified and directed by Engr-in-Charge.

S&F in repairs of sheet metal enclosures for DBs when MCBs to be used TPN-8 Way, 415V double door with bus bar as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in repairs of sheet metal enclosures for DBs when MCBs to be used SPN-4 Way, 240V without busbar as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in repairs of sheet metal enclosures for DBs when MCBs to be used SPN-8 Way, 240V with busbar as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in repairs of sheet metal enclosures for DBs when MCBs to be used SPN-12 Way, 240V with busbar as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F in replacement single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SP upto 20 Amps as per site requirment complete all as specified and directed by Engr-in-Charge.

S&F in replacement single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SPN upto 32 Amps as per site requirment of existing type for AC's/Geyser complete all as specified and directed by Engr-in-Charge.

S&F recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling in replacement of existing old unsv CFL fitting any type from ceiling of common areas and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed by Engr-in-Charge.

S&F recessed/surface mounting 40 watt 1' x 4' ' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling in replacement of existing old unsv CFL fitting any type from ceiling of common areas and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed by Engr-in-Charge.

S&F LED 22 Watt round dowlighter made with white colour injection moulded pylycarbonate housing for improved life and efficency designed to deliver not just high efficency but also a superior quality of light including flexible wire of suitable size as per sample in replacement of old unservicable down lighter fitting complete all as specified and directed by Engr-in-Charge.

S&F LED bulb 12 Watt B-22 Cap, AC 230V, 50 Hz suitable for Batten Holder/Bulk head/SK light fittings in replacement of old unsv lights any type complete all as specified and directed by Engr-in-Charge.

S&F in replacement of LED post top lantern fitting with die cast aluminium spigot, spun aluminium power coated top cover aluminium PDC heat sink opal PC diffuser clear acrylic IP-65 with 25 Watt power including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete including making a hole in pillar/wall with light grade GI pipe of suitable size for fixing the post top lantern fitting complete all as specified and directed by Engr-in-Charge.

S&F in replacement of LED garden light (Bollard) fitting luminaires of 10 Watt in Mashroom Shape of 3000K with IP 65 complete with all accessories including necessary connection of suitable size wire complete all as specified and directed by Engr-in-Charge.

S&F in replacement of plastic laminated sheet top cover 3mm thick of size 8"x5" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete as per sample complete all as specified and directed by Engr-in-Charge. Make : Anchor, Hylum, Mayur.

S&F in replacement of plastic laminated sheet top cover 3mm thick of size 11"x9" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete as per sample complete all as specified and directed by Engr-in-Charge. Make : Anchor, Hylum, Mayur.

S&F in replacement of MS sunken box of size 8"x11" & 4"x7" to fixing of switch board concealed with necessary screws and washers complete as per sample all as specified and directed by Engr-in-Charge.

S&F in replacement earthing complete with galvanized steel earth plate electrode 60cmx60cmx6cm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No.5 of SSR Part-I, including earth test point upto panel board, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of earth continuity conductor/main earthing lead fixed to wall on batten, buried in ground, drawn in conduit pipe or fixed, poles or any other indicate situation for loop earthing etc. as required 4 mm dia galvanised iron wire compelte all as specified and directed by Engr-in-Charge.

S&F in replacement of earth continuity conductor, main earthing lead fixed to roof wall other indicate situation for loop earthing etc. as required 32 x 6 mm dia galvanised iron or steel strip compelte all as specified and directed by Engr-in-Charge. Note :- Staircase arrangement for fixing of earth continuity upto to third floor shall be made by the contractor without any cost.

S&F in replacement of earth continuity conductor or main earthing lead fixed to roof wall other indicate situation for loop earthing etc. as required 25 x 3.15 mm dia galvanised iron or steel strip compelte all as specified and directed by Engr-in-Charge. Note :- Staircase arrangement for fixing of earth continuity upto to third floor shall be made by the contractor without any cost.

S&F in replacement LED building security light 40 Watts from existing bracket complete all as specified and directed by Engr-in-Charge.

S&F in replacement GI pipe's bracket suitable for fixing of bldg security LED light fitting of 40Watts including grouting and fixing the same on wall for installation of light fitting with necessary clamps, nut, bolts & washer and painting by synthetic enameled good quality paint in white/grey colour over one coat of red oxide primer until unless smoothness of bracket complete all as specified and directed by Engr-in-Charge. Note :- GI pipe should be 25 mm bore with medium grade and the same to be moulded in 45 degree angle at the 1 Mtr height to fix the building security light fitting.

S&F in replacement sheet metal enclosure of size 350 x 300 x 150 mm suitable for mounting electronic meter fabricated from CRCA sheet with anti corrosive dust and vermin proof. Note :- The meter cover shall have a transparent window. The window shall be of transparent, high grade UV stabilizer engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover complete all as specified and directed by Engr-in-Charge.

Taking down and re-fixing electronic/pre-paid meter in meter box with consultation with pre-paid meter authorities including necessary connections of incoming and out going cables for light and power as specified and directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or pwer) complete including fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets etc making good disturbed surfaces of walls, floors etc. complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable suitable concealed PVC/MS conduit and including replacment of unsv pressed steel terminal boxes of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and directed by Engr-in-Charge. Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed.

All as per item No.34 above but one 3 pin socket outlet, 5/6 Amps, independent, with cable 1.5 Sqmm suitable concealed PVC/MS conduit complete all as specified and directed by Engr-in-Charge.

All as per item No.34 above but 5 Amp socket outlet on same board complete all as specified and directed by Engr-in-Charge.

All as per item No.34 above but for one socket outlet15 Amps on independent board with cable 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing with through existing PVC/MS conduit complete all as specified and directed by Engr-in-Charge.

All as per item No.34 above but here-in-before for one socket outlet 15 Amps on independent board with cable 4 Sqmm size for phase and neutral and 4 Sqmm for earthing with through existing concealed PVC/MS conduit complete all as specified and directed by Engr-in-Charge.

All as per item No.34 above but here-in-before for one light controlled by 2 Way switch using cable 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing with through existing PVC/MS conduit complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 5/6 Amps SP one way complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 5/6 Amps SP two way complete all as specified and directed by Engr-in-Charge.

S&F bell push, flush type 5/6 Amps complete all as specified and directed by Engr-in-Charge.

S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 15/16 Amps SP one way complete all as specified and directed by Engr-in-Charge.

S&F universal socket outlet 2-in1 (multipurpose) 5 pin 6/16 Amps flush mounted type complete all as specified and directed by Engr-in-Charge.

S&F 0-4 step type electronic regulator for ceiling fan 1200/1400 sweep, 240 V complete all as specified and directed by Engr-in-Charge.

S&F in replacement, decorative wall light mounting suitable for LED lamp upto 15 Watt complete all as specified and directed by Engr-in-Charge.

S&F electric bell ding dong any type complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose surface bakelite 65x25 mm two to three terminals complete all as specified and directed by Engr-in-Charge.

S&F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge.

S&F wall mounted LED integrated batten T-5 20 Watt - 4ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in replacement of old unsv existing 36/40 Watt FTL fitting any type, complete all as specified and directed by Engr-in-Charge.

S&F wall mounted LED integrated batten T-5 10 Watt - 2ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in replacement of old unsv existing 36/40 Watt FTL fitting any type, complete all as specified and directed by Engr-in-Charge.

S&F surface mounting round/square shape LED down lighter 10 Watt any type complete with including new flexible wire as requried on site in replacement of old unsv existing ceiling light fitting complete all as specified and directed by Engr-in-Charge.

S&F in replacement LED 10 Watt white bulk head in engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through existing concealed PVC/ MS conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and directed by Engr-in-Charge. (a) One light/fan/bell point controlled by one swith 5 Amp one way. Note :- In existing conduit wiring new conduit will be added where there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes.

All as per item No 55 above but one 3 pin 5 Amps socket outlet point controlled by one No one way modular switch and modular socket on independent board.

All as per item No 55 above but one 3 pin 5 Amps socket outlet point controlled by one No one way modular switch and modular socket on same board.

All as Item No 55 above but point wiring for 16 Amps for modular socket point with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amps modular switch/socket outlet point on independent board.

All as Item No 55 above but here-in-before for one One light controlled by 2-way switches using cable of 1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing.

All as Item No 55 above but here-in-before for one AC point controlled using cable of 4 Sq mm for phase and neutral and 4 sqmm for earthing.

S&F in replacement of Switch modular type, 1Module, 6 Amps one way as per sample complete all as specified and directed by Engineer in Charge. Make :- Havells/Legrand/Anchor.

S&F in replacement of Switch modular type 1M 6 Amp 2-way as per sample complete all as specified and directed by Engineer in Charge. Make :- Havells/Legrand/Anchor.

S&F in replacement of Bell push modular type 1M 5/6 Amp as per sample complete all as specified and directed by Engineer in Charge. Make :- Havells/Legrand/Anchor or equilvant make.

S&F in replacement of Socket outlet modular type 2M, 2/3 pin, 6 Amp as per samplecomplete all as specified and directed by Engineer in Charge. Make :- Havells/Legrand/Anchor.

S&F in replacement of Switch modular type 1M, 16 Amp as per sample complete all as specified and directed by Engineer in Charge. Make :- Havells/Legrand/Anchor.

S&F in replacement of Socket Outlet modular type 2M combined shuttered, 5 pin 6/16 Amp as per sample complete all as specified and directed by Engineer in Charge. Make :- Havells/Legrand/Anchor or equilvant make.

S&F in replacement of Electronic fan regulator, modular type 2M, 4 steps, as per sample complete all as specified and directed by Engineer in Charge. Make :- Havells/Legrand/Anchor.

S&F in replacement Modular box with MCB 20 Amp complete with metal box and 3 Pin top plug as per sample complete all as specified and directed by Engr-in-Charge. Note : Rates are inclusive of cutting / chases for mounting modular metal box concealed in wall and making good to disturbed surfaces with OBD / Colour wash / white wash and wall putty where ever required.

S&F in replacement submain wiring PVC insulated FRLS single core unsheathed, multistrand copper conductor cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing PVC/MS conduit complete all as specified and directed by Engr-in-Charge.

S&F in replacement submain wiring PVC insulated FRLS single core unsheathed, multistrand copper conductor cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing PVC/MS conduit complete all as specified and directed.

S&F in replacement submain wiring PVC insulated FRLS single core unsheathed, multistrand copper conductor cable of size 2.5 Sqmm in 2 runs and 2.5 Sqmm one run for earth drawing through existing PVC/MS conduit complete all as specified and directed. Note for Srl item No 69 to 71 :- (a) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (b) Two runs of main cable and one run of earth cable all together shall be considered as one length. (c) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S&F in replacement of sub main wiring using single run PVC FRLS grade insulated unsheathed, multisrand copper conductor cable 3 runs of 10 Sqmm for Phase and neutral and 1 run of 10 Sqmm for earth wire drawn through existing PVC/MS conduit and including replacement of unsv pressed steel terminal boxes of in wall as per suitable/existing dia with fittings like tees, bends junction/terminal boxes etc as per site requirement and complete all as specified and directed by Engr-in-Charge. Note : (a) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (b) Three runs of main cable and one run of earth cable all together shall be considered as one length. (c) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

M/S Malik Construction Corporation

Saraswati Construction Co

NEERU ELECTRICALS

M/s Adhikari construction co.

Surjit and Sons