ADDN/ALTN TO BLDG NO P-298 AND TOILETS AT CERTAIN LOCATIONS AT AIR FORCE STATION AMRITSAR CANTT

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose soil complete all as specified and as directed.

Excavation in trenches for foudation,laying of cables, erection of poles,water supply pipe lines etc. n exc 1.5m wide and n exc 1.5 m in depth & getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material soil to a distance n.exc 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stop ,coping etc. including necessary form work and weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for RCC , M-25 Design Mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed..

M&L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors , roofs, landings , balconies, canopies, deck slabs and shelves etc complete all as specified and directed.

M&L for RCC M-25 design mix as in beams , cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC M-25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L, Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for Damp proof course using PCC 1:2:4, type B-0, 40mm thick including applying a court of blown bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.

Cutting opening through walls built in any type of cement mortar , for door, window and other openings or enlarging existing openings, etc or cutting out defective masonry for underpinning including providing, fixing and removing. Shoring cleaning and stacking bricks and removing surplus items from site complete all as specified and as directed

Forming jambs, etc., to openings (to foregoing item), with including cutting, toothings and properly bonding into old work with cement mortar 1:6, including facing and pointing (if necessary) to match existing work, complete alongwith making good under cills (or over arches, lintels and bressummers) including all pinning as necessary complete all as specified and as directed

M&L for laying 16 to 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, WHB platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of cement mortar 1:4 of 10mm thickness all as specified and directed by Engr-in-charge.

Material and labour for Formwork to sides and soffits of roof beams, lintels, cantilever, shelves, splay between floor and beam etc., flat fair finished concrete surfaces, complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. .

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surface of concrete

S & F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and directed.

S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all as specified and directed.

S&F 25mm Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work with decorative face veneer on both faces complete all as specified and directed.

Taking down shutters of any description not exc.1 sq.m and removing to store complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed.

Taking down chowkats or window frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m each complete all as specified and directed.

M&L for Solid PVC Door Frames of size 50mm x 47mm made out of 5mm wood grain PVC sheet reinforced with M.S. Square tube , supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded Wood grain PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets used instead of plain color and 5mm thick x 15mm wide PVC shhet eading used inside stiles and rails and decorative pvc beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S & F 300 mm long ISI marked mild steel ordinary rat tail rod pattern door spring including roller and roller plate fixed in repair complete all as specified and directed by engineer incharge

S & F floor door stopper of aluminium alloy body 140 mm cover plate and tounge , anodized with hard drawn steel spring fixed in floor fixed in repair as specified and directed by Engr-in-charge.

S & F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staple fixed in repair complete all as specified and directed. .

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed in repair complete all as specified and as directed.

S&F 150 mm ISI marked in size aluminium alloy anodised hasp & staple safety type with hinge pin including bolt to hinge plate and fixing with screws a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete and fixing clips of sheet cast or extruded sections and fixed complete all as specified and as directed.

S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete and fixing clips of sheet cast or extruded sections and fixed complete all as specified and as directed.

S&F 100mm size Stainless steel butt hinges of approved make complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles , anodised, fabricated type, anodised complete all as specified and as directed.

S&F CP brass towel rail D type 60 Cm long and 20mm dia type fixed to wall with screw and plastic cleats all as specified and directed by Engr-in-Charge

Supply and fixing structural steel rolled sections as in truss, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe-410W grade E-250 Quality-A, including one shop coat of red oxide primer, complete all as specified and as directed.

S&F Mild steel work for framed work such as grill grating/cooler stand etc with ends of bars shouldered and/or riveted or forged into spikes frame gurads bars barred iron, door ladders, framed balusters walk way railings frame work of water tanks and similar bent to curve work complete all as specified and directed

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape reqd, incl cranking bending spirally for hooping for col,hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips qty confirming to Fe-410W(Gde- E-250) or Fe-290(Gde-E-165) complete all as specified and as directed.

All as per description of item no. 41 here in before but 5mm dia & over upto and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Supply and fixing 4mm plain mild steel wire galvanised class 3 , in detached work such as for mosquito nets and fixing to bolts hooks etc as specified and directed by Engr-in-charge .

S&F Steel ventilators, with top hung shutter including hinges, steel peg stay made of MS sheet 1.25 mm thick box type (primer coated) , ERW hollow 'P' section of size 60mm x 25 mm complete all as specified.

Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in bent to curve sheds , roof covering/claddingto wall, fixed with self tapping screws as specified etc completed all as specified.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including ,cutting and mirror polishing and 20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed

Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

M&L 25 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in flooring etc complete all as spoecified.

M&L for Cement concrete type B-2 (1:2:4) using 20 mm graded stone aggregate mixed with & incl. water proofing compound as in roof padding averaging thickness of 50 mm on roof to maintain slope correction of the depressions/ unduated portion complete all as specified. Note : WPC shall be measured and paid separately.

M&L for 75 mm thick, plain cement concrete (1:3:6), type C-2, (using 40 mm graded mechanically crushed stone aggregates), laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and as directed. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

M&L for ceramic glazed coloured tiles of size 350x250x7mm/ 450x350x7mm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces as cladding ,skirting and dado complete all as specified and directed by Engr-in-charge.

M&L for ceramic glazed coloured tiles of size 600x300x7mm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces as cladding ,skirting and dado complete all as specified and directed by Engr-in-charge.

M&L for non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spc.

M & L for non skid/matt finish coloured ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding g 0.18 sqm but not exceeding 0.38 sqm sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (without backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces , finished the surfaces even and fair without using extra cement including taking down complete all as specified and directed by Engr-in-charge

M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces incl WPC, finished even and fair without using extra cement all as specified and as directed.

M&L 5mm thick cement plastering on ceiling in CM 1:3 over fair faces of concrete surfaces and rendering is to be finished even and smooth without using extra cement complete all as specified and directed by engineer in charge .

M&L for rendering 20mm thick cement plaster in layer of (15+5mm) on concrete surfaces in cement mortar (1:4) in patches and repairs at columns, chajja, canpoy and soffits finished even and smooth without using extra cement using GI chiken wire mesh having dia( 0.71mm and mesh size of 12mm) as directed including necessary scafolding arrangement as required at site complete all as specified and directed.

Taking down cement plaster on brick concrete surfaces/ceiling etc including racking out joints hacking for key,scrubbing down with water etc from walls and ceiling surfaces of any description & removing debries out side of MD land complete all as specified and directed.

M&L for preparing old/new plastered surface and applying three coats of whitewash on plastered surface of ceiling all specified and directed by Engr-in-charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre over and including 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish over a coat of primer, complete all as specified and directed.

Material and labour preparation of old plastered surface by complete removal of existing treatment, washing rubbing down scrapping and applying two coats of 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre over and including 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish over a coat of primer, complete all as specified and directed.

M&L preparing new/old plastered surfaces and applying two coats of cement base paint over a coat of primer on wall all as specified and as directed .

S&F Sheet glass 3mm thick ordinary quality and glazing with oil putty in squares in n.exc 0.5 sqm in each panes complete all as specified and directed

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane plain sheet glass ordinary quality and glazing with aluminium beading, complete all as specified and as directed.

M&L preparing new wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed

S&F Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), including connection to waste pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed.

S&F Vitreous china premium/ 1st quality wash down water closet one piece EWC white/ ivory/off white (closed pattern incl all necessary accessorieslike rag bolts/ gel gasket etc. (including flushing cistern 10 lit capacity, Hydraulic seat cover & flush pipe) complete in all respect allas specified.

S&F WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.

S&F for 10 ltrs capacity high or low level flushing cistern PVC marked white valveless syphonoic action type, inlet ball float and handle complete including PVC connection (15mm dia and 450mm length ) and bracketscomplete all as specified and as directed.

S & F Vitreous china wash basin white flat back 550 x 400 mm , with fitting of stainless steel coupling 32mm suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc fixed in repairs complete all as specified and directed.

S&F Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing push button flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including waste pipe and urinal spreader complete all as specified..

S&F Urinal partition of 8mm thick opaque toughened glass of size 310x700 mm , fixed with wall with 40 cm above floor line all as specified and directed

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) bends with access door for 110 bore of pipe complete all as specified and as directed.

S & F PVC (SWR) junction single, (Single T) equal or unequal for 110mm dia bore as specified and directed.

S&F in 75 mm dia PVC (SWR ) floor trap/ nahani trap with grating, plain with grating including jointing with solvent cement complete all as specified and directed

M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in open/concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe complete all as specified and directed.

M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in open/concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe remove to store or credit, complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed

M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in open/concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe complete all as specified and directed.

M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or llaid in floors, in open/concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe remove to store or credit, complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed

Supply and fixing pillar taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia and fixed to WHB and connections to iron pipe fixed in repair complete all as specified and directed.

S&F fancy long body type bib taps cast copper chromium plated alloy with crutch handle, screwed down, screwed for iron pipe and fixed, chromium plated, suitable for 15mm bore of pipe complete all as specified and as directed.

S&F CP wall mixture with telephonic shower head fancy type hanging arrangement and telephonic shower suitable for 15mm bore pipe fixed to wall all as specified and directed. Make: Jaquar, Kohler, Roca

S&F fancy type bib taps long body cast copper chromium plated alloy with crutch handle, screwed down, screwed for iron pipe and fixed, chromium plated, suitable for 15mm bore of pipe fixed in repair complete all as specified and as directed.

S&F Gun metal globe or gate valves, with iron wheel head screwed both end for iron pipe and fixed of size 20mm dia complete as all specified and as directed.

S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both end for iron pipe and fixed of size 20mm dia complete as all specified and as directed.

S&F angle valve fancy type cast copper alloy screwed down, high pressure with crutch handle screwed both end for iron pipe and fixed, chromum plated suitable for 15mm bore of pipe complete all as specified and as directed.

S&F angle valve fancy type cast copper alloy screwed down, high pressure with crutch handle screwed both end for iron pipe and fixed, chromum plated suitable for 15mm bore of pipe fixed in repair complete all as specified and as directed.

S&F Grating doom brass Chromium plated 125 mm dia of with waste pipe hole (minimum weight 40 gms) fixed in repairs complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromimum plated auitale for 15mm dia pipe with 1.25m long long flexile tube ABS wall hook including making connections and fixed and complete all as specified

S&F PVC connection pipe ready made for connecting cistern, WHB etc 15mm dia 450 mm long with PTMT nuts, complete all as specified and as directed.

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘double layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘double layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.

S&F for concealed stop cock type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F 20 mm bore Ball brass valves , high pressure , with polythene float valve and flynut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S&F soap dish brass chromium plated complete all as specified and as directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed .

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified.

M&L for Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M&L for Demolition of cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M&L for Dismantling of CI/PVC pipe of 75/100mm dia fixed with cement joint.

M&L forDismantling of brick tiles or terracing tiles single layer on roofs all as specified and directed

M&L for Demolition of Mud in roofs any thickness, including plastering and leaping ( whether full thickness removed or only a part thereof ) etc complete all as specified

M&L for preparation of surface by scrapping and properly cleaning the surface by removing loose/ uneven particles with wire brushes and other tools,Filling of cracks with smart Care Hybried PU sealant wherever requiered and applying 15mm thick rendering in CM 1:4 alongwith covering and applying smart care damp proof ultra and assure proper curing of plaster , Laying of fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun Reflectivity Index (SRI) of 105 on top of roof in three coats @ 1.2 litre/ sqm to be reinforced with 45 GSM fiber mesh, having minimum elongation of 350%, tensile strength 2.9 Mp and shall have crack bridging ability upto 2.5 mm and shall resist 10 bars of hydrostatic pressure, reduces surface temperature upto 10 degree celsius. The system conists of self priming with 33% ditution followed by two undiluted coats (dry film thickness of complete appliaction/ system not less than 500 microns). Note :- (i) Ponding test shall be done after application of material and the cost is deemed to be inclusive. In case oif any leakage/failure the complete area of roof be treated again without any extra cost. (ii) The work of water proofing will be carriedout by authorized representative/applicator of the Manufacturer The necessary documents in this regard will be submitted & got approved from the Engineer-in-Charge before commencement of work.

S & F factory made box type glazed and gauged steel window/ ventilator made out of ERW hollow P&T section. Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified and shown in drawing No CEAF/STD- 184/2012 Sheet No 1/3, 2/3 & 3/3, including MS grill and necessary formwork complete and including shop coat of redoxide primer with following fittings welded to frame/shutter:- (a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides) (b) Handle of 'Z' section 20mmx25mm Each leaf 01 No (c) 100mm stopper-01 No to Each leaf. (d) MS tower bolt 150mm long - 02 Nos in each leaf. (e) Cleat 55mm long of hollow square 15mmx15mmx24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf. (f) MS box type hinges of size 75x12mm-03 Nos per leaf (g) Fabrication & fixing complete (h) Flat iron for fixing wire gauge to gauge window. Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respective items. ii) Design shall be got approved from the Engineer-in-charge as per Drg No CEAF/STD-184/2012 Sheet No 1/3, 2/3, 3/3 before fabrication and placing bulk order to the manufacturer.

Material and labour for applying two coats of Acrylic weather coat emulsion paint on newly plastered walls/ceiling/facias/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height.

Supply& fixing of ball bearing runners 45mm Telescopic channel (20inch) full extension load capacity 50kgs, make;(Hettich,sleek,prime)

S & F counter top wash basin, vitreous china, white flat back, size 550 x 400 mm including brackets, pillar tap, cast copper alloy , 15mm bore capstain heads, chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts including PVC waste pipe and 32 mm dia chromium plated cast copper alloy waste coupling all as specified and as directed.

S&F White Virgin Magnet Catchers For Cupboard,50cmx25cm including all fitting complete all as specified and directed.

Internal Electrification

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.

Material and labour for Point wiring for One light / Celing fan/ Exhaust fan point/Bell point, controlled by one switch 5 Amp SP one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth duly including MS sunken box covered with 3mm thick bakelite laminated “hylem or Philips“ sheet top cover and machine made brass screw and washers etc complete all as specified and directed Notes;- (i) For Internal wiring colour to be used as per IE rule for Phase - Red/Yellow/Blue, Neutral - Black and Earth – Green (iv) Making good on disturbed surfaces and quoted rate including M&L for white/colour wash (existing colour) to macth with existing surfaces, complete as directed by Engineer-in-Charge (ii) Switch/socket to be measured and paid separately. (a) For one light/fan/bell point controlled by one 6 Amp one way switch

All as per item No. 115 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.

All as per item No. 115 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board.

All as per item No 115 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including continous copper solid conductor connecting to comman earth dolly completed all as specified and directed ny Engineer-in-charge for the following - (Note :- Sunken boxes, frame, plate is included in the quoted rate)

S & F of switch piano flush type single pole one-way 6 Amp complete all as specified and directed.

S & F of switch piano flush type single pole one-way 16 Ampere complete all as specified and directed.

S & F of 6 Ampere socket outlet flush type, multi purpose suitable for 3 Pins complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Ampere flush type with shuttered complete all as specified and directed.

S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.

S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.

Supply and fixing LUMENO LED tube light fitting 1x20 watts with PVC insulated flexible copper cable from ceiling rose to tube light fitting complete all as per specified and directed.

Supply and fix Wall mounted fan 400 mm sweep heavy duty 3 star rating, metalic body & blade suitable for 230V single phase AC supply including copper wire flexible three core 1.5 sqmm PVC insulated 3 core cable from ceiling rose to fan complete all as specified and as directed. Make : Havells/Bajaj/CG

S & F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified.

S & F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified.

S & F MCB DP, 240 Volts, AC, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

S & F MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

Supply and fix single phase propeller type ventilating (Exhaust fan ) AC 230 volts 350 mm sweep, metal body Heavy duty motor, complete with lourvers and shutters complete all as per specified and directed. Make : Havells, Crompton Greaves, Bajaj.

Repair of existing exhaust fan of any make any size 250 mm/450 mm sweep from any location , transporting to local workshop and back , opening, cutting and taking out complete copper winding wire , cleaning with kerosene oil /diesel/ terpin oil and dried out, rewinding with new super enamelled copper wire of suitable size and gauge and number of turns as recommended by the respective manufactures, varnishing and heating the winding including providing paper insulation (cuff /strip type) replacing u/s / missing spare (bush, bearing , capacity etc) fixing the stator in rotor properly aligned and reassembling ensuring right DOR , speedy and noiseless running and refixing the exhaust fan to its original or other location complete all as directed by Engr in charge

Supply and fixing LED street light fitting 25/30/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised iron wire 4mm dia as earthing lead by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point complete all as specified & testing on completion as specified and directed by Engr-in-Charge

External Electrification

M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.

M&L, GI pipe light grade 40 mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc, including taking out old GI pipe, all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core complete all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 core complete all as specified

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron strip 25X4mm as earth lead by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)dismanteling of esisting unserviceable erth pit all as specified and directed by Engr-in-Charge. Including taking out old u/s earthing.

External Water Supply

Supply and laying GI pipe galvanized, “Medium class”, including fittings 40 mm dia all as specified and directed.

Supply & laying GI pipes 25 mm dia, medium grade with all necessary GI fittings laid in trenches or on walls including taking out old pipe complete all as specified and as directed by EIC.

Supply and Fixing Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 25mm dia fixed in repair all as specified and directed by EIC

M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy, fancy type, long shank and cup (concealed), chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed.

MISC Items

Supply and fixing electric water heater,storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece complete all as specified.

S & F for Sensor Faucet for wash basin having plump sensing range 150mm polished CP complete all specfied Make : Jaguar/ Cera/Kohler

S&F electronically operated sensor urinal cat part No. S4010102 of CERA, Jaquar (URS-WHT-13255) or equivalent model of makes specified here-in-after as approved by Engr-in-charge along with hanging brackets stainless steel Coupling, brackets, sensor battery and connection to bottle trap complete all as specified and directed by EIC

S & F automatic hand dryer 220 V, 50-60 Hz having air speed 16 m/s including point wiring 1.5 sqmm for independent board 06 Amp switch/scocket complete all as specified and directed by EIC Make : Jaquar/ Cera/Kohlar

S & F wall mounted paper towel dispenser having capacity 225-275 pieces complete all as specified and directed. Make :- Jaquar/Dolphy

S & F wall mounted automatic (sensor) lotion dispenser having capacity 1200 ml incl all fittings complete all as specified and directed. Make : Jauqar / Cera/Kohlar

Road/Path/Culvert

M&l for removal of excavated material exc. 500m upto distance of 1.5 km and depositing all as specified and directed.

Material and labour for 100 mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floors, complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone/saucer drain of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand.

Sewage

M&L for construction of Soakage well of 1.80 m dia,3.00 metre effective depth including excavation in any type of soil ,foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M 25 reinforced cement concrete, intercepting chamber , screen chamber made of brick masonry in CM 1:4 , RCC cover slab in M25/SFRC cover , interconnecting pipes of RCC/DWC complete filled with brick bats including all form work complete all as shown on drawing and as specified .

M&L for provn of LLDPE septic tank for 25 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc. complete, all as specified.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.5 mtr depth for foundation as for manholes, pier holes etc. and getting out in hard/dense soil complete.

M&L for Concrete bed to 150 mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in cement concrete (1:3:6) type C-2 complete all as specified and as directed.

M& L for 150 mm dia Reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars complete all as specified and as directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in precast manhole cover slab,chullah hoods, chajjas and other similar articles with plain faces including necessary form work complete all as specified and as directed

Cutting into existing manholes for connecting new drains 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specfd

Note: The Total amount shall subject to adjustment of credit of Rs. 29,970.00 for old Materials as per Schedule of Credit.

M/S BALWINDER SINGH (BID ID -3320965)

M/s AKG Engineers & Contractors (BID ID -3317282)