Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.5 LAccepted-AOC | L1 | Accepted-AOC 1ST LOWEST | |
| 2 | L2₹45.5 L+₹3.6 L (8.60%)Rejected-Finance | L2 | Rejected-Finance 2ND LOWEST | |
| 3 | L3₹46.2 L+₹4.3 L (10.3%)Rejected-Finance | L3 | Rejected-Finance 3RD LOWEST | |
| 4 | L4₹48.0 L+₹6.1 L (14.5%)Rejected-Finance | L4 | Rejected-Finance 4TH LOWEST | |
| 5 | L5₹48.7 L+₹6.8 L (16.3%)Rejected-Finance | L5 | Rejected-Finance 5TH LOWEST |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
31 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
ADDITION ALTERATION OF TOILETS OF BUILDING NO.P-644 AND OTHER CERTAIN WORKS AT GMS UNDER GE I GOS
2022_MES_568525_1
8000/55/22-23/0954/E8
Open Tender
Civil Works
Item Rate
180 days
GOPALPUR-ON-SEA
PLEASE REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
Yes
GARRISON ENGINEER I GOS
₹80,000
Yes
4 Feb 2023
10 Dec 2022
2 Jan 2023
10 Dec 2022
31 Dec 2022
24 Dec 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises. Complete all as specified and directed.
M&L for Non Skid Ceramic Coloured Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortor 1:6. Complete all as specified and directed.
M&L for Glazed Ceramic Coloured Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over & including rendering 10 mm thick in cement mortor 1:4. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment Complete all as specified and directed.
M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.
M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement). Complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement). Complete all as specified and directed .
M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash. Complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash .Complete all as specified and directed.
M&L for preparation of old painted surface of wall & applying one coat of white wash on walls. Complete all as specified & as directed by Engr-in-Charge
M&L for preparation of old painted surface of ceiling & applying one coat of white wash on ceiling surfaces. Complete all as specified and as directed by Engineer-in-Charge.
Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. Complete all as specified and directed.
M&L for Brick work with old size flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6. Complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n exc 1.50 Sqm each and removing to store. Complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.50 Sqm but n exc.4 sqm each and removing to store. Complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification & drawing. Complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and drawing. Complete all as specified and directed.
M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. Complete all as specified and directed.
S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, brackets for WHB, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165. Complete all as specified and directed.
M&L for Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required. Complete all as specified and directed.
Taking down shutters of any description area exceeding 1 sqm & n exc 2 sqm each and removing to store. Complete all as specified and directed.
S&F 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. Complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm in width or girth & apply two coat of Synthetic enamel paint over a coat of pink primer, Complete all as specified and directed.
S&F 100 mm long extruded aluminium, anodized, handles fabricated type. Complete all as specified and directed.
S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed etc. Complete all as specified and directed.
S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21. Complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. Complete all as specified and directed.
S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate, Complete all as specified and directed.
S&F in repair 100 mm long extruded aluminium, anodized, handles fabricated type. Complete all as specified and directed.
S&F in repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed etc. Complete all as specified and directed.
S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21. Complete all as specified and directed.
S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. Complete all as specified and directed.
S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate. Complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads. Complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane. Complete all as specified and directed.
S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pane. Complete all as specified and directed.
S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples. Complete all as specified and directed.
S&F in repair sheet Glass Shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. Complete all as specified and directed.
Taking up or down 15 mm bore of pipe steel tubing and connections including cleaning for refixing or removal to store. Complete all as specified and directed.
Taking up or down 20 mm bore of pipe steel tubing and connections including cleaning for refixing or removal to store. Complete all as specified and directed.
S&F 15 mm bore 3 layer PP-R (Poly-propylene random copolymer) pipes SDR 7.4 (PN-16) UV stablised and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified & directed.
S&F 20 mm bore 3 layer PP-R (Poly-propylene random copolymer) pipes SDR 7.4 (PN-16) UV stablised and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified & directed.
Making connection of PP-R distrubtion branch with PP-R main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc. Complete all as specified & directed.
S&F in repair 15 mm bore, Fancy type Chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Complete all as specified and directed.
S&F in repair Chromoium plated angular stop cock for 15 mm bore. Complete all as specified and directed. Make-Jaquar CON-053KN
S&F in repair 15 mm dia fancy type pillar tap, cast copper alloy, with capstan head, chromium plated, crewed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed. Complete all as specified and directed.
S&F in repair 32 mm bore dia waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms) etc. Complete all as specified and directed
S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm). Complete all as specified and directed
S&F in repair PVC waste pipe for WHB etc. Complete all as specified and directed.
S&F in repair 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/sq.cm. laid in trenches. Complete all as specified and directed.
S&F in repair Hand shower (Health faucet) with 1 mtr long Easy flex tube in chrome finish & wall hook. Cat ALD-CHR-565 Make Jaquar. Complete all as specified and directed.
M&L in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe. Complete all as specified and directed.
S&F in repair plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device. Complete all as specified and directed.
S&F in repair PVC valveless symphonic action type low level flushing cistern, 10 ltrs capacity with inlet ball valve, float and handle including brackets. Complete all as specified and directed.
S&F in repair 125 mm dia, chromium plated shower rose of with or without swivel joint including fixing to steel pipe or union. Complete all as specified and directed.
S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions. Complete all as specified and directed.
S&F in repair CP anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges etc. Complete all as specified and directed.
S&F in repair 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement. Complete all as specified and directed
S&F in repair Soap dish any type fixed to plug with chromoium plated brass screw. Complete all as specified and directed.
S&F in repair corner glass shelf with brackets. Complete all as specified and directed.
M&L in repairs for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc. Complete all as specified and directed.
S&F in repair Urinal partion wall mounted of white colour size 310 X 770 mm. Complete as specified and directed.
S&F in repair Chromoium plated Two-way angular stop cock for 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule. Complete all as specified and directed. Make-Jaquar CON-059KN
Taking down rain water pipe of any size or pattern incl all fitting head, shoe, band, swan neck etc. Complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius. Complete all as specified and directed.
S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal. Complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) vent cowl. Complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius. Complete all as specified and directed.
S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal. Complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) vent cowl. Complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all as specified & directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling, subbase & mass concrete. Complete all as specified & directed.
M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling, subbase & mass concrete, Complete all as specified & directed.
Surface excavation n.exc 30 cm deep and getting out in soft/lose soil Complete all as specified & directed.
Excavation in trenches not exceeding 1.5m wide and not exceedinf 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/lose soil
M&L reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as inColumns, pillars, piers, posts and struts complete all as specified and directed
Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) , complete all as specified and directed
S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A , complete all as specified and directed
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
Returning, filling in of soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed
Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point. complete all as specified and directed
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using waqter proofing compound complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.
Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.
M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.
M&L 100 mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base, sub floors, including use of formwork / screed strips to divided the area in panels complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floors finished even surface complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement complete all as specified.
M&L for two coats of cement based paint over a coat of white wash after preparation of new plastered surface complete all as specified.
Preparation of newly plastered surface of walls and applying two coats colour wash over one coat of white wash complete all as specified and directed.
Supply only water proofing compound ISI marked complete all as specified.
Brick work with "old size fly ash' bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4 complete all as specified.
S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed.
S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.
S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.
M&L for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as sapecified and directed.
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed
S&F 15 mm fancy type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.
S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.
S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube. complete all as specified and directed
All as per Item No. 117 above but 25 mm dia.
PVC(SWR) bend 110mm bore with access door complete all as specified and directed
All as per above 119 but 75mm bore complete all as specified and directed
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
S&F PTMT waste coupling of 32mm dia for wash basin/urinal all as specified and directed.
S&F PVC LDPE waste pipe of pressure rating 6kg/cm2 of 32mm dia pipes. complete all as specified and directed
M&L PCC 1:3:6 type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200mm dia pipe all as directed.
M&L 200mm dia salt galzed stoneware drain pipes laid in trenches and jointed as specified.
M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.
M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminted 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by ENgr-in-Charge for One light point controlled by one , one way switch 5 Amp
All as per item no. 129 One exhast fan point controlled by one , one way switch 5 amp
All as per item no. 129 One 3 pin socket outlet 5 amps on the same board
All as per item no. 129 but for One 5 Amp socket point controlled by one switch on independent board
M&L Switch piano flush button single pole one way 6 Amps, complete all as specified and directed.
M&L for Ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed.
M&L for socket outlet 5 pin 5 Amp complete all as specified and directed (Make : Anchor/ Legrand/ Schneider/Polycab).
S&F Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete 220 volts, 50 Hz complete all as specified and directed
S&F Sheet metal enclouser for DB's when MCBs to be used single pole neutral 8 way with 200 Amp rated bus bar double door complete all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 32 Amps SPN and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.
M&L for GI tube medium grade of size 32 MM dia laid for protection of cable/ earth strip complete all as specified an directed
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated complete all as specified and directed.
Supply and fixing of light fitting bracket made out of 32mm bore GI pipe, light grade, tubing bend to shape, 1.5 metre long, fixed to pole/wall, painting with two coats of aluminium paint over a coat of red oxide primercomplete, all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.
Supply and laying flyash building bricks laid in trenches for LT cable complete all as specified and directed.
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core complete all as specified and directed
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed
Supply and laying for 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size 25 mm Complete all as specified and directed.
Supply and fixing PP-R Gate valves (brass insert) of size 25 mm dia complete as per requirement of the site Complete all as specified and directed.
Boring of holes horizontally for laying of 32 mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.
M&L for laying of steel water tube medium grade under road/ path of bore 80 mm complete all as specified and directed by Enhr-in-Charge
M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 Core complete all as specified.
M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core complete all as specified.
M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150 Sqmm 3.5 Core complete all as specified.
M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm 3.5 Core complete all as specified.
Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 6 to 16 Sqmm 4 core complete all as specified and directed by Engr-in-Charge.
Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 25 to 50 Sqmm 4 core complete all as specified and directed by Engr-in-Charge. Make - 3M or equivalent
Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 70 to 120 Sqmm 4 core complete all as specified and directed by Engr-in-Charge.
Boring of holes horizontally for laying of 80mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.
Supply and fixing in repairs LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified.
Supply and Fix in repair for PVC junction box of size 270 x 225 x 135 mm with Aluminium bus bar 200 Amps capacity -4 No's . MCB SP 6 Amp - 1 No and having provision of cable hole in bottom for two to three armoured cables of size 25 Sqmm 3.5 core, connection box shall be fitted on street light pole and fixing arrrangements i.e. MS clamps etc deemed to be provided by the contractor all as specified and directed . Make Syntex/Hensel
Taking down and replacement of existing unserviceable street light fitting bracket with new brackets made out of 32mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall, painting with two coats of aluminium paint over a coat of red oxide primercomplete, complete all as specified.
Taking down and replacement of existing unserviceable clamps with new clamps made out of 40x3 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer, complete, all as specified and directed.
M&L for painting steel tubular pole 9 mtrs long alongwith bends with two coats of aluminium paint over a coat of red oxide primer, 1.2 mtr height from top of copping with two coats of black bituminius paint/ yellow paint with equal height of 0.3 mtr each alternately and including marking of pole number with black paint in yellow circle, complete, all as specified and directed.
M&L for painting PCC pole 9 mtrs long alongwith bends with two coats of weather proof paint and 1.2 mtr height from top of cooping with two coats of black bituminous paint/yellow paint with equal height of .3 mtr each alternately and including marking of pole number with black paint in yellow circle, complete, all as specified and directed.
M&L in repairs for PVC electric conduit pipe of size 20 MM dia complete all as specified and directed to be connected from junction boxes to steet light bends complete all as specified.
S&F in repairs for pvc insulated flexible copper cable of size 1.0 Sqmm 3 core FRLS complete all as specified and directed
M&L for taking down old unsv ACSR conductors complete all as specified and directed by Eng-in-Charge
M&L for taking down old unsv cross arms/channels, insulators, brackets and other connected items complete all as specfied and directed
V.Venkata Ramaiah
R K Traders
M/s Bapujee Builders and Traders
ABC CONSTRUCTION COMPANY
M/s MAA BHAIRABI ENTERPRISES
HARAGOURI SUPPLIERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .