343/W/EDC-I/SRE/2023-24

Amount

Detail of Work

Safely Carriage of 63/100 KVA T/F from ESC, SRE to Site of work including loading & unloading at both ends.

Safely carrage of PCC Pole 8.5/9 Mtr Long from ESC SRE to site of work including loading and unloading at both ends.

Safely carriage of 33 XLPE cable from ESC SRE to site of work including loading and unloading at both ends

Safely laying of 33 XLPE cable size 3x300 sq.mm overhead cable properly.

making and fixing of cable box size 3x300 sq.mm

providing of Holding clamp

Providing of nut & bolts

Safely carriage of 33 KV Fuse set from ESC SRE to site of work including loading and unloading at both ends

Safely Installation of 33 KV Fuse set and connection properly

Grouting of stay rods by digging of pits in block 600x600x300 MM & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

Safely carriage of Line Material (Except PCC Pole/Conductor)ESC SRE to site of works through privet vehicle including loading and unloading at both ends. (Distance 0 to 40 K.M.)

Earthing of pole by Earthing rod.

Erection of single support on PCC poles up to 8.59 Mtr Long with complete fitting of all accessories of 11 KV/LT line.as per RESPO specification.

Fabrication and Erection of D/P on PCC poles8.5/9 Mtr. Long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per RESPO specification.

Safe installation of 63/100 KVA T/F on the D/P with complete fittings including making connections and commissioning.

Removal of ACSR scrap from site of work to ESC SRE including loading and unloading at both ends.

Safely carriage of ACSR weasel conductor from ESC SRE to site of work including loading and unloading at both ends.

Laying, lifting, stringing, sagging jump ring & binding of ACSR weasel conductor for HT/LT Line.

Removal of 100 KVA T/F from the existing D/P after opening HT & LT connection and with shifting the T/F from the site to ESC, SRE/JE store with loading & unloading at both ends.

Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 30 km.)

Constriction of plinth for installation of 250 kv T/F of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick RCC top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall.

Safe installation of 250 KVA T/F on the Plinth with complete fittings including making connections and commissioning.

Wire mesh fencing of 250 KVA T/F size 2.5x2.5x2.5 mt. grouting making frame of MS angle 45x45x6 mm and fixing four no. MS strip size 25x6 mm at equal distance in between the frame and fixing squre mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6'x3' with sitakni & Dandala.

Pipe/Water Level Earthing of 250 KVA T/F (1 No body & 1 No. neutral earthing) by boring of 60 Ft deep & fixing of 60 ft. G.I pipe 11/2" Dia (Jindal Class B) and connecting with G.I. Strip of size 40x5 mm and G.I wire at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe

Safely cartage of AB Cable (3x120+1x70+1x16)/(3x95+x1x35+1x16) from ESC, SRE to the site of work including loading unloading at both ends. (Dist. up to 40 KM.)

Laying Lifting stringing & Sagging of ABC Cable size (3x120+1x70+1x16)/(3x95+x1x35+1x16) sq.mm. including fixing of all type clamps and connector of all accessories.

Safely fixing of Distribution Box properly.

Providing of All type clamp

Providing of Lug

Laying of LT/XLPE cable 1*240 sq.mm/3.5*70 sq.mm as per respo specification.

M/s Ayushi Enterprises