GE/SRA/T-11/2024-25

Amount

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Repairing of broken/damaged portions of RCC Projection, Chajjas, Roofs Facia, Column, etc. upto any height adhering proper safety precaution and including necessary preparation i.e. scrapping, cutting, chiseling, removing all loose concrete and cleaning exposed reinforcement with wire brush and applying one coat of cement slurry and filling the surfaces with min 25mm thick Cement Concrete 1:1½:3 (12.5mm graded stone aggregate), surfaces finished to match with existing surfaces including providing a Coat of Chalk Whiting and finishing with Two Coats of Exterior Emulsion Paint over a coat of exterior cement primer with approved Tint as per manufacturer's instructions, complete all as specified and as directed. NOTES : 1) Site for application is at various locations in patches with varying heights upto 12m. Contractor's quoted rate shall deemed to be inclusive of the ibid aspect. NO claim shall be entertained during currency of work. 2) Cost of Formwork/Prop, scaffolding, safety gear shall be deemed to be included in the Quoted Unit Rate.

Removing vegetation growth/shrubs (girth up to 30 CM), cutting in brick wall/concrete surface upto triple storey building carefully without damaging the existing soil, vent, water supply pipe and removing roots of plants completely and filling the gaps with PCC 1:2:4, Type B-0 finished with existing surface including all scaffolding ladder etc as required surface are n.exc. 0.36 Sqm each complete all as specified and directed.

S&F in repair Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, and fixed-in-repairs, and applying Two Coats of acrylic distemper (as approved) over a Coat of 1.5 mm thick wall care putty for priming the surface complete all as specified and as directed.

M&L Rendering (Internal) 15 mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty, 1.5 mm thick including rubbing down with Sand Paper to obtain a smooth finish surface and applying with rollers Two Coats of Acrylic Distemper (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L preparing new Plastered Surfaces of Walls and applying three Coats of White Wash, complete all as specified and as directed.

M&L for Rendering 10mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceilings etc., surfaces finished Even and Smooth without using Extra Cement complete all as specified and as directed.

M&L preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".

Supply only Liquid Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L for preparation of newly plastered surfaces and applying exterior wall putty 1.5 mm thick for smooth surface and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) in camouflage pattern of approved tint over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions, upto 4 storey height complete all as specified and directed.

M&L Rough Cast Plaster on Brick Walls upto double storey consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) in camouflage pattern of approved tint over a coat of suitable exterior Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete all as specified and as directed.

M&L preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash, complete all as specified and as directed.

M&L preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying Two Coats Coat of White Wash, complete all as specified and as directed.

M&L for Complete Removal of existing Treatment on walls and applying 1.5 mm thick Wall Putty, Rubbing down with Sand Paper to obtain a Smooth Finish Surface including filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Acrylic Distemper (as approved) over a coat of suitable pimer, with rollers complete all as specified and as directed.

M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying with rollers One Coat of Acrylic Distemper (as approved), complete all as specified and as directed.

M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying with rollers Two Coats of Acrylic Distemper (as approved), complete all as specified and as directed.

M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L for preparation of old treated/painted external steel surfaces of STEEL OVERHEAD RESERVOIR, 50000 lires capacity of any description, by removal of of loose paint, rust patch, etc, applying one coat of red oxide primer over rust patches and finishing of complete external surface and staging with one coat of synthetic enamel paint (in camouflage pattern) with approved tint complete all as specified and directed. NOTES:- Quoted rate shall deemed to be inclusive of the following aspects :- i) Height of OH Reservoir is approx 24 metres. ii) All safety precautions to ensure safety of the workers engaged for the work shall be arranged by the contractor. iii) Insurance of workers to be engaged for the work shall be got done by the contractor before commencement of work and submitted to Engineer-in-Charge. iv) Quoted rate shall be deemed to include for the cost of necessary scaffolding, cradles etc for execution of work. v) Removal of rust patches, if required, shall be properly carried out with wire brush, emery paper etc and covered with one coat of red oxide primer before application of synthetic enamel finishing coat.

M&L for preparation of old treated/painted external steel surfaces of STEEL WATCH TOWER of any description, not otherwise described for by removal of of loose paint, rust patch, etc, applying one coat of red oxide primer over rust patches and finishing of complete external surface and staging with one coat of synthetic enamel paint (in camouflage pattern) with approved tint complete all as specified and directed. NOTES:- Quoted rate shall deemed to be inclusive of the following aspects :- i) Height of watch Tower is approx 15 metres. ii) All safety precautions to ensure safety of the workers engaged for the work shall be arranged by the contractor. iii) Insurance of workers to be engaged for the work shall be got done by the contractor before commencement of work and submitted to Engineer-in-Charge. iv) Quoted rate shall be deemed to include for the cost of necessary scaffolding, cradles etc for execution of work. v) Removal of rust patches, if required, shall be properly carried out with wire brush, emery paper etc and covered with one coat of red oxide primer before application of synthetic enamel finishing coat.

M&L Writing Letters or Figures (Block Roman, Italic or Indian) on Buildings, not exc 15 cm High, complete all as specified and as directed.

M&L for cleaning and preparation of old treated surfaces of wood or wood based surfaces, exc 10 cm in width or girth and applying one coat of varnishing complete all as specified and directed.

M&L for cleaning and preparation of old treated surfaces of wood or wood based surfaces, exc 10 cm in width or girth and applying a filler coat and finished ith two coats (under coat and finishing coat) of varnishing complete all as specified and directed.

GENERAL NOTES:- 1) Distemper, Primer, Enamel Paint and Exterior Emulsion Paint shall be procured in sealed containers and shall be deposited in MES store before start of the work. 2) Material shall be issued by JE/AGE as per site requirement. 3) Make of Primer shall be same as that of overlaying paint. 4) Type of Primer shall be as recommended by manufacturer for respective surfaces.

AGGARWAL CONSTRUCTION CO.

M/s MANN CONSTRUCTIONS

M/s Har Nandi Construction Company

shiv shanker enterprises

YESH BUILDERS

M/s Satguru Traders

P.K ENTERPRISES