REPAIR/ MAINT OF CERTAIN BLDGS, OFFICES AND OFFRS ACCN AT CIF (R) SIG REGT UNDER AGE(I) CIF (R)

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including10mm thick screed bed in cement mortar 1:4 complete all as specified and directed by engineer-in-charge.

M&L for glazed ceramic coloured designer tiles 450 x 300x 7 mm thick as in Vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete over 15 mm thick rendering in CM 1:4 all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match, laid over 10mm thick screed in CM 1:4 complete all as specified and directed by engr-in-charge.

M&L for Vitrified coloured ceramic tiles 10 mm thick (square/ rectangular) polished as in vertical surface i.e skirting, dadoes etc, set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match, laid over 10mm thick rendering in CM 1:3 complete all as specified and directed by engr-in-charge.

Taking down cement plaster on brick wall or concrete surfaces of ceilling etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-charge.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling of wall and ceiling boards (fiber, pulp, insutation etc) or insulation board/slab/blankets, any thickness including cover fillets complete.

S&F in position suspended anodised aluminium false ceiling grid system using E-grid suspended ceiling grid system.The size of grid shall be 605x605mm fixed in the grid of E-grid suspended ceiling grid system duly suspended by 6mm dia GI(upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size long and expantion hold fastencer 12.5mm dia 40mm long and 6mm thick calcium silicate boards of silicous and calcareous material reinforced with cellulous fibre for fixing in 600x600mm grid complete all as spcified and directed.

S&F for 500 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) HDPE triple layer ISI marked, hoisted and fixed in position all as specified in SSR Part-I and 15 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed including all accessories and dismantling of old water storage tank, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of bowl size 550x440mm including 15 mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and chromiumplated waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket complete all as specified and directed.

S & F in repair, Vitreous china one piece EWC with slim soft close seat cover size 715x335x715mm straight -line design square blow concealed 'S' trap for batter aesthetics, snow white colour, including fixing with screw/bolts fixed in repairs, complete all as specified and directed. Make:-CERA Cat. No.S1013209 or equivalent cat part of make as specified in list of make here-in-after.

Supply and fix in repair Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, complete all as specified & directed.

S&F low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.

Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 20mm and connections, including cleaning for refixing or removal to store etc complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified.

Refixing old 15mm bore of steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed.

Refixing old 20mm bore of steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15 mm bore CP jet spray all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F in repair 75mm PVC Bends (any radius),complete all as specified and directed.

M&L in repairs 75mm PVC floor trap, with grating including jointing to waste pipe fixed in cement type B-1 1: 2:4 and making good wall or floor tiling to match existing surface,complete all as specified and directed.

Taking down shutters of any description 1 Sqm but n exc 2 sqm each all as specified

S & F 35 mm thick second class hard wood factory made plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including fixing with beads, nut bolts, welding, etc complete all as specified.

S & F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed,complete all as specified and directed.

S&F aluminium alloy, sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, all as specified.

S & F 100 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodisedand, complete all as specified and directed.

S&F 300 mm mild steel oridinary rat tail rod pattern springs including roller and roller plates, complete all as specified and directed.

Prepration of new wood or wooden based new or previously untreated surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 5,020.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/S DEEP KUMAR MALIA (BID ID -3347500)

MEHTA OM PARKASH (BID ID -3339974)

M/S RAHUL GUPTA (BID ID -3341778)