Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.7 LAccepted-Finance | ₹6.7 L | 1 | Accepted-Finance OK |
| 2 | 2₹6.9 L+₹13,438.68 (2.00%)Accepted-Finance | ₹6.9 L+₹13,438.68 (2.00%) | 2 | Accepted-Finance OK |
Tender Value
₹6.7 L
EMD Value
₹13,440
Closing Date
12 Aug 2026, 10:00 amClosed
executive officer
NAGAR PALIKA MAHWA
TUBE WELL AT RAMSROOP PUTR MOOLARAM
2026_DLB_583426_1
578
Open Tender
Civil Works
Percentage
30 days
WORK
GST AADHAR PAN EMD FEES PROSS FEES, REG COPY
2 documents required · 2 mandatory
₹500
executive officer nagar palika mahwa
₹13,440
Yes
15 Aug 2026
7 Aug 2026
12 Aug 2026
7 Aug 2026
12 Aug 2026
7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of Tube-well upto 100 Meter depth and above in all
type of rocks by DTH system and over burden to accommodate
casing pipe of following sizes in all types of soils and over burden
including lowering of casing pipes but excluding cost of casing pipes
as per IS : 2800 (Part I & II) 1979 specifications. The work would be
completed after obtaining sand free water. The tube well should
have a throughout bore as per nominal dia of casing pipe: 150 mm dia Nominal bore | 100 | mtr | 844 | ₹84,400 |
| 2 | Construction of tube-well from ground levels to accommodate
housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coirrope, wherever necessary for arresting fine sand particles. The workwill not include cost of housing pipe and strainer pipe assembly anddevelopment work, but work would be completed after obtaining
sand free water).Upto 100 Meter depth Nominal bore 150mm dia | 100 | mtr | 1,414 | ₹1,41,400 |
| 3 | 20.3 Development of tube well as per IS specification using suitablecompressor to give sand free water for required yield of the gravelpacked tube well. hour 610.00 | 10 | hour | 610 | ₹6,100 |
| 4 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992)
of grade Fe410 of following nominal bore sizes at site of work 150 mm dia | 110 | mtr | 1,517 | ₹1,66,870 |
| 5 | 20.10 Providing & lowering of G.I. flange pipe B Class including rubberwasher and nuts of 8 mm dia complete in all respect. 20.10.1 50 mm dia metre 656.00 | 120 | mtr | 656 | ₹78,720 |
| 6 | 150 mm diameter Submersible pump shall have following HPRating, phase, Head range, Discharge range respectively12.5 HP, 3-Ø, (78 - 126)Mtr, (395-245) LPM | 1 | each | 80,949 | ₹80,949 |
| 7 | P/Laying ISI marked P.V.C. insulated submersible cable confirmingto(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire shouldbe made from 99.90 % purity copper, stranding in acc. toIS:8130/IEC 60228 for lower watt loss , oxygen free for lesschances of oxidization, insulation PVC type A/C/D , flame retardantas per IS 10810-53, better amperage rating as per IS:3961 part 5,existing pipe / open trench / Cable tray / on surface including makingconnection etc. as required. For additional technical parameters of
product / work refer Annexure 'A' attached with this BSR53.7.5 06.0 Sq.mm 3 core flat / Round Mtr. 308.00 | 260 | mtr | 308 | ₹80,080 |
| 8 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :34.19.1 25 mm nominal bore 34.19.1.1 Horizontal each 876.00 | 1 | each | 876 | ₹876 |
| 9 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P -I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouringof cables, Inner / outer sheath confirming to IS:5831 in existing RCC/ Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of followingsize. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additionaltechnical parameters of product / work refer Annexure 'A' attached with this BSR25.0 Sq. mm60.2.5.2 3 core Mtr 250.00 | 40 | mtr | 250 | ₹10,000 |
| 10 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart andmade out from 1.6 mm thick powder coated CRCA sheet, enclosurecomprising of over load protection relay, short circuit & single
phasing protection, Illuminated ON / OFF push buttons, ammeter,voltmeter, indicating lamps etc. suitable for following rating motorscomplete in all respect. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work ,
refer Annexure "A" attached with this BSR12.5 HP to 15.0 HP ( Star / Delta starter ) Each 22,254.00 | 1 | each | 22,254 | ₹22,254 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_1036308.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .